Nauticam CR1530-Z User manual

INSTRUCTION MANUAL
For CR1530-Z Zoom Gear for Canon
RF 15-30mm f4.5-6.3 IS STM
PN# 19597
Thank you for your purchase of a NAUTICAM
product.
At NAUTICAM, e pride ourselves in the ability to
recognize the requirements of professional as ell
as amateur under ater photographers and fulfill
them through the innovative designs of our
products. We strive to achieve a high level of
user-friendliness by allo ing stress-free
installation and easy operation of all important
functions of the camera.
Each product is individually inspected and ater
pressure tested to ensure optimum quality.
Please read this manual carefully before using the
product, this ill maximize its performance as ell
as its lifetime.
FORWOR
Current as of 1/13/2023

All NAUTICAM Products are arranted against
any material and manufacturing defects for t o
years from the date of purchase for consumer
use. This arranty only applies to products
purchased from authorized NAUTICAM dealers
and does not extend beyond the original retail
purchaser.
To return your product for service, please
contact your regional authorized service
center(s). Please note that this arranty only
applies hen the product is purchased in the
territory here the service center is located.
NAUTICAM does not hold responsibility for
damage, of any nature, to any equipment used
ith and/or placed ithin our products.
NAUTICAM accepts no liability for any loss of
captured images or the inability to capture
images even if it is due to the malfunctioning of
our products.
Unauthorized modifications and/or repairs of
our products ill automatically invalidate the
arranty.
WARRANTY

I ENTIFICATION OF PARTS
Spare Rubber grips
Locking ring
CR1530-Z Zoom Gear

MOUNT THE GEAR ON A LENS
1. Insert the CR1530-Z Zoom Gear as
sho n and place it over the lens.
2 Place the Locking Ring over the gear
and plastic ring, and scre it into the
thread on the gear.
3. To remove the CR1530-Z Zoom Gear,
reverse the above steps.
The tightness bet een the CR1530-Z
Zoom Gear and the lens can be
adjusted by removing or adding rubber
grips on either sides of the plastic C-
ring, spare rubber grips are included in
the package.

CONTROL THE GEAR
1. The CR1530-Z Zoom Gear can be controlled by zoom/focus knob of
the housing.
After mount the camera and lens ( ith gear installed) on the housing,
confirm that the zoom/focus knob operates correctly.

SPECIFICATIONS
#19597 CR1530-Z Zoom Gear for Canon RF 15-
30mm f4.5-6.3 IS STM
Dimensions: DIA102mm × 29.5mm
Type: Zoom gear
Compatible lens: Canon RF 15-30mm f4.5-6.3
IS STM
Remark:
Nauticam supports only e-manuals. Please do nload
corresponding product manuals on google drive
https://bit.ly/Nauticammanual, or contact us for e-
manuals.