NAVEE N40 User manual

Executive standard: CE EN17128
The pictures and functions described in this paper are for illustration and reference purposes only. The products described
should be subject to the actual, real objects. The EN technical performance indicators mentioned are based on the specific
experimental environment, and the actual indicators may vary according to design and environment. The safety protection
components of this product are only used for auxiliary safety management, which can not replace other safety measures.
Do not use this product for any illegalpurpose.
The pictures are for reference only. Please read the product manual before using the product
−Warranty card included
NAVEE Electric Scooter N40 User Manual

Contents
1. Products & Accessories ----------------------------------------------------------------------2
2. Introduction to Functions -------------------------------------------------------------------3
3. Safety Instructions---------------------------------------------------------------------------4
4. Product Display ------------------------------------------------------------------------------8
5. Correct Riding Method ----------------------------------------------------------------------9
6. Handlebar Control --------------------------------------------------------------------------- 10
7. Assembly -------------------------------------------------------------------------------------11
8. Deployment Steps ------------------------------------------------------------------------- -- 12
9. Folding Steps ----------------------------------------------------------------------------- ---13
10. Charging ------------------------------------------------------------------------------------- 14
11. Carry ----------------------------------------------------------------------------------- ------ 14
12. Basic Operation -------------------------------------------------------------------- ----- --- - 15
13. Operating Instructions ------------------------------------------------------------ ----- --- - 16
14. Riding Instructions ---------------------------------------------------------------- ----- --- - 17
15. Battery and Charger ----------------------------------------------------------------------18
16. LED Display ---------------------------------------------------------------------------------- 19
17. Maintenance --------------------------------------------------------------------------------- 22
18. FAQ -----------------------------------------------------------------------------------------23
19. Specifications --------------------------------------------------------------------------------24
20. Warranty and Service ------------------------------------------------------------------------25
21. Warranty Card -------------------------------------------------------------------------------- 27

Welcome
1 Products & Accessories
Scooter Body
Accessories
Manual Charger M3 MS Wrench
1 2
Thank you for choosing the NAVEE electric scooter N40 (hereinafter referred to as N40). Now you can
experience the pleasure of riding your own electric scooter. It should be pointed out that the N40 is
only a small-sized electric scooter intended for individual riding, it is not suitable for acrobatic use.
Manufacturer:Zhejiang Feishen Vehicle Industry Co.,Ltd
Please check carefully to ensure the items in the packing box are complete and in good condition.
Warning! To prevent accidents, please place the packaging bags and product accessories in locations
which are out of the reach of children.

2 Introduction to Functions 3 Safety Instructions
3 4
3. Do not ride this product in areas in which it is unsafe or illegal
to ride, or on unsafe or off-limits roads.
４． Ｉｔ ｉｓ ｆｏｒｂｉｄｄｅｎ ｔｏ ｒｉｄｅ ｔｈｉｓ ｐｒｏｄｕｃｔ ｏｎ ｐｕｂｌｉｃ ｒｏａｄｓ ａｎｄ
ｍｏｔｏｒｗａｙｓ．
1. This product can only be used by one person. Do not carry others at the
same time while you are riding. The product is recommended for use by
riders over the age of 13 and under the age of 65. Other persons who are
not suitable for riding this product include: (1) persons under the
influence of alcohol or drugs. (2) persons unable to engage in strenuous
physical activities due to illness. (3)persons who are incapable of keeping
their balance or who cannot keep their balance due to impaired motor
skills. (4) persons whose weight exceeds the prescribed limit. ( 5)
pregnant women ( 6) persons who suffer from visual and/or hearing
impairment.
2. When riding this product, please wear a safety
helmet and suitable protective devices. Do not ride
barefoot or in high-heeled shoes.
Note: before using the product, please carefully read and follow the
following important safety information.

11. Do not immerse the product in water more
than 4 cm deep to avoid damage to the battery of the scooter.
4 cm
5 6
5. Do not engage in any dangerous actions during driving
, such as riding with one leg or one hand. Make sure
that both of your legs and hands are on the scooter.
6. Do not attempt to ride over or pass steps, curbs or other
obstacles that have a height of more than 3 cm, since doing so
may cause the scooter to overturn and thereby cause personal
injury to the driver or damage to the product, steps, curbs
and/or other obstacles with a height under 3 cm should also be
avoided as far as possible. Do not park the scooter on an
incline.
7. For your driving safety, please maintain a speed
within 25 km/h while riding. Please try to avoid riding
at night. lf you are required to ride at night, please
turn on the lights and maintain a speed within 15 km/h.
8. Do not use this product in an environment with a
temperature below-10 ℃.
９． Ｉｎ ｃａｓｅ ｏｆ ｕｎｅｖｅｎ ｒｏａｄ ｏｒ ｏｔｈｅｒ ｐｏｏｒ ｒｏａｄ ｃｏｎｄｉｔｉｏｎｓ，
ｐｌｅａｓｅ ｓｌｏｗｄｏｗｎ ｉｎ ｔｉｍｅ ａｎｄ ｄｒｉｖｅ ｓｌｏｗｌｙ ａｎｄ ｃａｒｅｆｕｌｌｙ ｏｒ
ｇｅｔ ｏｆｆ ａｎｄ ｐｕｓｈ ｉｔ． Ｔｈｅ ｓｃｏｏｔｅｒ ｉｓ ａ ｓｐｅｃｉａｌ ｒｉｄｉｎｇ ｐｒｏｄｕｃｔ
， ｐｌｅａｓｅ ｔｒｙ ｔｏ ｒｉｄｅ ｏｎ ａ ｆｌａｔ ｒｏａｄ ｗｉｔｈｏｕｔ ｐｏｔｈｏｌｅｓ．
10. Do not ride on the ground with oil or ice on the surface.
12. Do not drive the scooter in snow orrain, on muddy, icy or wet,
roads under any circumstancesand do not drive the scooter over
obstacles (sand, loose gravel or road block). Doing so may result
in loss of balance or grip. When riding in rain, please keep your
distance and avoid sudden braking.

Beware of
Fire
7 8
13. Do not use this product beyond the maximum load(100 kg)
specified in this product.＞100 kg
Safety tips: do not hang or place any objects on its handlebars and body while riding.
14. Please avoid using or placing the product in an
environment where the temperature is above 40 ℃or
below-10 ℃. Please do not place this product
together with flammable items so as to avoid fire in
the unlikelyaccidental circumstances.
15. Users should ride safely and legally in strict
accordance with local laws and regulations.
Open State
Folded State
4. Product Illustration

5. Correct Riding Method 6 Handlebar Control
Check the scooter before each ride, and ride only
after the folding safety lock is engaged.
1. Hold the handlebar with both hands, not with one hand.
2. Turn in the right direction, hold the handlebar tightly and turn left and right.
3. Do not rotate the handlebar 360°.
4. The brake level and the bell are on the left side of the handlebar.
5. Hold the brake level with your left hand.
6. The power & speed control button are on the right side of the handlebar.
7. When riding, press the accelerator with your right thumb.
8. Please ring the scooter's bell when you are in a crowded place.
9. Do not add a basket to the front of the scooter.
Warning!
1) When riding, please do not hang heavy objects on the body and handlebars, this will affect the stability of the
scooter and cause potential safety hazards.
2) Regularly check whether the screw part of the handlebar is tight, and whether the frame, fork, brake and
other parts can be used normally. If scooter parts are damaged, please stop using and repair or replace the
parts promptly.
9
10
Warning !
（1) This product should be ridden on the roads and areas stipulated by local laws. It is forbidden to ride outside the roads and
areas stipulated by the laws. It is forbidden to ride on motorways.
（2) When crossing obstacles, stop riding and fold it or slow down to pass safely.
（3) When passing pedestrians, please sound the bell to alert them.
1. Check the scooter before each ride, and ride only after the
folding safety lock is engaged.
2. Wear well-fitting flat heeled sports shoes to ride this product.
3. Please practise riding in an open space.
4. Keep away from vehicles and crowded areas. Please drive on
the roads or areas stipulated by local laws.5. Safety helmet and
protective equipment must be worn while riding.
6. The age of the rider should be between 13 and 65 years old
(inclusive).
7. You should not drive on uneven ground. If there are any
obstacles, please stop riding, fold up or walk across the blocked
passage.
8. Avoid riding in rainy and snowy weather or at night, keep
away from cars to avoid sudden braking.
9. The maximum load capacity of the product (user plus luggage
) is 100 kg.
10. The height of the rider should be 1.4 m to 2.2 m (inclusive).
11. Do not hang or place objects on the scooter body and
handlebars.
12. This product is a personal riding product and cannot be used
for stunt riding.
13. Users should abide by local laws and regulations.
14. It is recommended that the front and rear light are checked
before each ride.
15. Do not modify or adapt this product.
16. Do not use replacement parts other than professionally
produced parts provided by the original manufacturer.
Do not use any replacement parts not from the manufacturer or allow repair by other repairers than those approved by the manufacturer. You
should understand that following the instructions and warnings in this manual can reduce risks, but not eliminate all risk. Please remember that you
may be at risk of losing control, collision and falling while using the scooter. When you enter a public area, please abide by the local laws and
regulations. Just like all vehicles, the faster you drive a scooter, the longer it takes to stop. On smooth ground, emergency braking may also cause
the wheel to slip or the driver to fall. Therefore, it is very important to stay alert and keep a reasonable safe distance from other people and vehicles.
When driving into unfamiliar areas, keep alert and drive at low speed.

7 Assembly 8 Deployment Steps
11 12
c. Hold the stem back up, lift the folding safety lock, and push the quick-release lever inward to the end.
a. Open the kickstand.
b. Hold the stem up until it is completely in an upright position. Lift the folding safety lock, and push the quick-release lever
inward to the end.
c. Install the handlebar onto the stem, and make sure to install the handlebar in the correct direction.
d. Pre-tighten the six screws with the included wrench. Make sure the handlebar is correctly installed and then tighten the
screws thoroughly.
Safety tips: before each ride, please check to ensure that the screw, folding safety lock and other link parts
are not loose.
Safety tips: when lifting the front part of the N40 scooter, do not put your hand between the joints.
a. Open the kickstand.
ab
c
d
b. Pull the buckle upwards to release it from the
hook.

9 Folding Steps 10 Charging
11 Carrying
13 14
1. Open the kickstand. 2. Hold the stem, lift the folding safety lock, and open the
quick-release lever, then fold the stem.
3. Align the buckle with the hook and secure them together.
4. Fold up the kickstand to complete folding.
The scooter needs to be turned off before being folded. Since the product can be folded, do not step on or turn the
folding safety lock when riding. Note: Please always use the original charger.
Warning!
1) Do not touch the intertace when charging, be careful of electric shock.
2) Please check whether the power is off before charging.
3) Do not turn on the power when charging.
4) Do not use this product when charging to avoid the damage.
5) It is recommended to charge at 0-45 .
6) Please keep the scooter body away from heat source, open fire, flammable and explosive gas(liquid).
Hold the stem with either one hand or both hands to carry.
1. Open the rubber plug of the charging port.
2. Plug the charger into the charging port.
3. The scooter is fully charged when the LED on the charger changes
from red (charging) to green (trickle charge).
Charging Port

12 Basic Operation 13 Operating Instructions
。
15 16
A: Accelerator B: Power & Gear Shift Button
D: LED Display E: Bell F: Brake Level
Power Button
Power On/Off: Press and hold the power button for 3 seconds to turn on the scooter.
After power on, press the power button for 3 seconds to turn it off.
Gear setting
After power on, press the power button twice to shift the gears.
Speed Control
Press the accelerator to control the speed range(1-15.5mph(25 km/h)).
Brake Control
Hold the brake control on the left to brake.The greater the holding force is, the greater the braking force is. When
braking quickly, it is easy to fall due to the loss of traction, and you are at risk of serious injury. Please driveat moderate
speed and pay attention to potential dangers.
Head and Tail Light
After power on, click the power button to turn the head and tail light on and off.
Emergency Braking
In case of emergency, hold the left brake tightly to control the brake, which can activate the rear wheel friction brake and
the front wheel electromagnetic brake at the same time. In order to avoid riding risk and damage to the rear wheel, the
rear emergency brake should not be used during normal driving within the speed control range.
Tire Pressure
Before riding, please make sure that the tire pressure is not lower than 230KPA and the maximum pressure is not higher
than 250 KPA. If the tire pressure is too high, there is a risk that the tire will burst. If the tire pressure is too low, the
mileage will be reduced and the tire will be damaged. If the scooter is not used for a long time, the tire pressure may
also be lower than the standard. (Note:solid tire is not in the scope of requirements).

14 Riding Instructions 15 Battery and Charger
18
Start Riding
1. Press the power button to turn the scooter on.
2. Place one foot on the deck and the other foot on the ground.
3. Slide the scooter body forward and gently press the accelerator,
the scooter will move forward slowly.
4. When riding, hold the handlebar tightly with both hands to
avoid injury or falls due to losing balance.
5. When the scooter is running smoothly, move the other foot
onto the pedal. Press the accelerator, the greater the acceleration
angle, the faster the scooter speed.
17
Riding Preparation
1. Choose an open space suitable for riding.
2. Ride on the flat road.
3. Unfold the product according to the instructions and
wear protective equipment.
4. Wear comfortable shoes that fit your feet well.
5. Keep away from vehicles and crowded places.
6. Protect yourself and others under any circumstances.
Parking
1. Under normal circumstances, if you hold the left brake
handle, the scooter will power off and brake immediately.
The greater the grip angle, the greater the braking force.
2. In case of emergency, hold the left brake lever tightly to
activate the front wheel electromagnetic braking and rear
wheel friction braking. The rear brake disc will heat up
rapidly in use. Please do not touch it.
Note: In order to ride safely, NAVEE scooter N65
is equipped with non-zero start, and the scooter
with non-zero start can only use the accelerator
function after sliding forward for a certain
distance.
Each NAVEE scooter N40 is equipped with a bespoke lithium battery and a dedicated smart charger. Each scooter and its
accessories have a specific number, do not use other brands of charger, other types of chargers are not suitable for this
product.
Battery
Ex-factory voltage is 39~41 VDC, rated voltage is 37 V DC, maximum charging voltage is 42VDC, and rated capacity
is 10 AH. The Llithium battery provided by our company can be recharged at least 500 times, and normal battery
capacity can reach more than 70%.
Charger
The special charger provided has overcharge protection.When the battery is fully charged, the charger will
automatically power off. Full charge time is 7-8 hours. Battery damage caused by water immersion, collision and other
abnormal use factors is not within the scope of warranty policy. If the charging port or charging line is wet, please do
not connect the charger.
Kinetic Energy Recovery
During driving, pressing the brake will activate the kinetic energy recovery system. This will convert some of the
kinetic energy into electrical energy that is stored and used. The kinetic energy recovery system can also enhance
emergency braking. At the same time, the recovered kinetic energy can help to increase the endurance with changes in
the power display.
Safety tips: do not remove the external lithium battery while charging.

16 LED Display
19 20
＞ 80% ＞ 60% ＞ 40% ＞ 20% <10%
M1-M5 On M2-M5 On M3-M5 On M4-M5 On M5flashing
On Off
If the headlight setting is on, the indicator will always be on. If the headlight setting is off, the indicator will always be off.
T1 On T1 Off
First Gear Second Gear Third Gear
First Gear engaged Second Gear engaged Third Gear engaged
T6On，T7/T8 Off T7On，T6/T8 Off T8On，T6/T7 Off
Power Button:
Press and hold the button for 3 seconds to turn the scooter on/off. When the scooter is on, press
the button to turn on/off the headlight, and press twice to cycle through the modes.
Power Indicator Definition of LED
The battery power is indicated by 5 bars, each representing approximately 20% of a full battery. The M5 LED flashes when the
battery level falls below 10%.
Headlight State Indicator:
Gear Indicator:

17 Maintenance
Warning T2 flashes and the display values E1-E6flash
Fault Code Solution
Rx
communication
failure
E1
Please check whether the braking tail light is on. If it is not an this means that there is no power to the
cortroller. Replace the contrdler or instrument. If it is on, please check whether the connecting line from
the instrument to the controller is open.
Braking Error
E2
Please check if the
brake is pressed
If it is pressed,release the brake.
The connecting wire between the
braking and the instrument needs to
be checked on whether there is short
the drauit or open drcuit.
1.Open drcuit or short dircuit
need to replace the connecting wire
2.Replace the brake hande.
Handle Error E3 Please check if the
handle is pressed
If it is pressed, release the handle
If not, please check the connecting
wire between the handle and the
instrument for short drcuit or open
dircuit
开路或短路更换连接线
更换拇指加速器
Wheel Motor
Error
E4
Check whether the wheel
motor and the controller
cord are well connected.
If not, connect the wheel motor to the controller cord.
Controller Error
E5
If the controller is damaged,replace the controller.
Overheating
Warning
E6
Check whether the battery
temperature is too high?
Once the battery temperature is within the normal operating
temperature range, the scooter can be used or charged again.
21 22
Lubrication
During maintenance, add a small amount of grease or lubricant to the folding part
every 6 months, and check the tightness of the screw of the scooter every 3 months, and
tighten the screw if loose.
Battery
When you first get the electric scooter, please fully charge the battery before use.
Charging will not damage the battery. If this product is not used for a long time, please make sure it is
charged at least every 3 months.
Storage and daily maintenance
The scooter needs to be turned off before being cleaning.
Please do not leave the scooter in the hot sun or very wet place for a long time.
Please keep the scooter clean.
Do not clean thes scooter with high pressure hose.
Please do not scrub with corrosive detergent.
Do not make any modification
Please do not refit or modify the scooter in any way, including the steering column and sleeve, rod,
folding parts and rear brake assembly.
Warning!
1) It is recommended to check the folding device, shock absorber, wheel and axle of the scooter regularly. If there is
wear, please replace them promtly.
2) It is recommended that the frame and front fork are regularly checked. Long term use may lead to the screw
loosening. Clean and tighten the screws regularly.
3) Please replace the parts in case of failure.
4) When the parts exceed the expected service life, please replace them in time.
Note: Regularly check the tightness of bolted parts, especially the fastenings of axle, folding system,
steering system and brake shaft.

18 FAQ 19 SPECIFICATIONS
23 24
Parameter Name
FN-E1
Size Vehicle: L × W × H
1135 X500X1178mm
After Folding: L × W × H 1135X500X475mm
Weight Net Weight
About 16 kg
State Max. Load
100kg
Main Parameter
Max. Speed 15.5 mph (25 km/h)
General Range About 40 km (It depends on the environment, angle,
speed, driving habits, etc.)
Max. Climbing Angle
About 12%
Suitable Surfaces The road surface should be flat and smooth, the road surface bulge should be less
than 2 cm, and the depression should beless than 3 cm
Tire 10-inch pneumatic tire
Shock Mitigation System Pneumatic Tires
Noisetest Less than 70 dB
IP Rating
IpX4
Brake System Rear wheel disc braking+front wheel (motor) electromagnetic brake,braking
distance<Brake system 7m
LED Display
Real-time speed, mileage, gear, braking force, voltage display, speed unit,
headlight status indicator,
Bluetooth, automatic cruise control, fault display
Lamp System
LED front and rearl amps
Motor Power
350W
Charging Parameters
Adapter
54.6 V/2 A/Short Circuit Protection
Lithium Battery
37 VDC, 10 AH
Charging Time
About 7-8 h
车。
When the product fails, please refer to the
following ways to try for solution:
1.The display screen is black.
Reason: this scooter is exposed to sunlamp for a long time.
Solution: put the scooter in a cool place for a period of time.
2.The value is inconsistent with the actual value.
Reason: incorrect or missing parameter setting.
Solution: long press the power button to turn off and then
press to restart the scooter.
3.The digital display is dim.
Reason: poor battery contact or no battery power.
Solution: turn off the power, and then turn it on again. If the
fault still exists after the battery is charged, please contact
the manufacturer or dealer.
4. If the product cannot operate normally,
please check whether the following have
been completed.
a. Check that the power is on.
b. Check the battery level on the display.
c. Check whether the left brake lever and rear disc brake are in
place.
d. Check that all sockets and connectionsare properly connected.
If all steps have been completed and the product still
does not work properly, please contact the
manufacturer or dealer.
5. The controller is damaged. Do not
replace the controller without authorization.
Please contact the manufacturer or dealer,
do not disassemble the product without authorization.
6. The stem is get unstable
Reason: the screw at the joint of the stem and the
folding seat is loose.
Solution: lower the column, loosen the three screws
, raise the column, tighten the screws at the back of
the pole, and then lower the pole and tighten the
three loosened screws to solve the problem.
ABC

20 Warranty and service
25 26
Type Warranty content Warranty period
Controller Controller assembly and central warehouse dashboard 12 months
Lithium battery Lithium battery pack and protection board 12 months
Main body Frame assembly, hub motor, front body, rear hub, brake assembly,
folding assembly, vertical bar, front fork, rear fork, vertical bar
rotating parts, control bus, braking line 12 months
Enclosure Charger, brake handle, thumb accelerator 6 months
Warranty Statement:
If the product is within the warranty period from the date of your purchase, we will repair, replace or return it free
of charge as the case may be if it is confirmed by the manufacturer or dealer that it is faulty or damaged due to
quality defects under normal use. Unless otherwise specified by relevant laws, the product or component used for
replacement may not be new, but nevertheless performs well and is equivalent, at least, to the original product or
component in function. The warranty period is calculated from the first date of purchase of the product, subject to the
invoice date. If there is no valid invoice, the warranty period shall be calculated from the date of delivery plus thirty
(30) days. If the invoice date is later than the actual delivery date of the product, the warranty period shall be
calculated from the actual delivery date. The repaired or replaced products shall continue to enjoy the warranty for
the rest of the warranty period, but not less than thirty (30) days. For warranty application, please contact the
manufacturer or distributor of the product and follow the instructions. When applying for warranty, an accurate,
complete and clear valid sales invoice should be provided.
The above warranty does not apply to failure, malfunction or damage caused by: (a) misuse, abuse or improper
transportation, maintenance or storage, such as but not limited to use, storage or maintenance under improper
temperature, humidity or other improper environmental conditions; (b) force majeure or accidents, network or power
interruption and other reasons beyond our reasonable control: (c) repair or removal without authorization from the
manufacturer; (d) the way in which damage has been caused by any third party products or services shall be specified
（purposes other than those for which the product has been designated or intended: (f) using the product in
violation of the product instructions: (g) using the product for commercial purposes; or (h) the accumulated mileage
recorded by the scooter body has exceeded 2000 km. Normal wear and tear or aging, scratches, abrasions and
problems caused by the use of coatings, solvents or other chemicals during general use of the product do not fall
within the scope of the warranty. If the original identification label of the product is changed or damaged, this
warranty will be invalid. The integrity and completeness of the products and of the attached materials are not within
the scope of the warranty.. You should inspect the products on the spot when receiving them and object immediately
to any ascertained discrepancy/ies.
The above warranty statement applies to our products. This warranty grants the specific legal rights and other
rights you may have according to the law. Nothing in this document affects your rights in a fashion that is not
susceptible of exclusion or restriction in accordance with law.
Warranty information for the product:
Reminder: The following consumables delivered with the scooter upon purchase are not covered by the warranty: inner and
outer tires, front lamp assembly, instrument cover, handle cover, fender, rear tail lamp, decorative cover, foot support,
charging port seat, rubber plug and scooter kit. When repairing and replacing parts, do not use any replacement parts other
than professional parts provided by the original manufacturer. For replacement, please contact the manufacturer.

27 28
User’s information
Full name E-mail
Mailing address
Contact number Postal Code
Product information Name of the product Sales date
Product model Invoice number
Vendor information Name Contact number
Address Postal Code
Note: (1) This form shall be confirmed by the seller's seal
(2) For products applicable to relevant "three guarantees" regulations,
this warranty card is equivalent to "three guarantees certificate":
(3) The maintenance record is subject to the voucher issued by the authorized service organization.
Please keep it in a safe place after applying for service.
When purchasing the product, we recommend that you clearly fill
in the following information and affix the sales seal to protect your legitimate rights and interests:
Warning!
This product is the same as any mechanical parts. The scooter can bear high stress and wear. Various materials and
components（scooter's machinery, axle) may react differently to wear or fatigue. If
the component have reached the expected service life, they may break suddenly, causing the risk of injury. If any
problem is found,
please repair and replace the parts in time. If there are cracks, scratches and discoloration in the area under high load, it
indicates that the component has exceeded its service life. Please contact the manufacturer or dealer to replace the
component as soon as possible.
21 Warranty card
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.