Lone Worker Solution | Installation Manual
2
Contents
Disclaimer .......................................................................................................3
1Introduction ...............................................................................................5
1.1 Product Overview........................................................................................ 5
1.2 Audience.................................................................................................... 5
1.3 Box Contents.............................................................................................. 6
2Installation .................................................................................................7
2.1 Prerequisites .............................................................................................. 7
2.2 Installation Overview................................................................................... 7
2.3 Find the Qube ............................................................................................ 8
2.4 Mount the Antenna ..................................................................................... 8
2.5 Mount the Charging Dock ............................................................................ 9
2.6 Mount the Interface Module......................................................................... 9
2.7 Connect the Antenna to the Interface Module.............................................. 10
2.8 Connect the Charging Dock to the Interface Module..................................... 10
3Wiring ......................................................................................................11
3.1 Before Starting ......................................................................................... 11
3.2 Connect the Interface Module to the Qube .................................................. 11
3.3 Connect the Interface Module to the Ignition Loom or Fuse Box.................... 13
4Commission Testing ..................................................................................14
4.1 Configuration and Activation of Lone Worker Solution .................................. 14
4.2 Charge the Pendant .................................................................................. 14
4.3 Check the Ignition Connection ................................................................... 14
4.4 Test the Pendant High Priority Alert Function............................................... 14
4.5 Test the Person Down Alert Function .......................................................... 15
4.6 Test the Pendant Check In Function ........................................................... 15
4.7 Test the Antenna Alert Function ................................................................. 15
4.8 Test the Out of Range Warning.................................................................. 16
4.9 Handover ................................................................................................. 16
4.10 Troubleshooting........................................................................................ 16
5Configuring the System .............................................................................17
5.1 To Configure the Lone Worker System........................................................ 17
5.2 Configuration Settings ............................................................................... 17
6Contacts...................................................................................................18
