NCR 7358-K705 Manual

Kit Instructions
2-Pack Large Basket Module (Medium Gray)
7358-K705
Issue B

The product described in this document is a licensed product of NCR Corporation.
NCR is a registered trademark of NCR Corporation. NCR FastLane SelfServ™ Checkout is a trademark of NCR Corporation in
the United States and/or other countries. Other product names mentioned in this publication may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks
of HDMI Licensing LLC in the United States and other countries.
Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is permitted under the
terms and conditions of an agreement you have with NCR, NCR's copyright notice must be included.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware become
available. NCR, therefore, reserves the right to change specifications without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances,
photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR
office for information that is applicable and current.
To maintain the quality of our publications, we need your comments on the accuracy, clarity, organization, and value of this
book. Please use the link below to send your comments.
Email: [email protected]
Copyright © 2021
By NCR Corporation
Global Headquarters
864 Spring St. NW
Atlanta, GA 30308
United States
All Rights Reserved

i
Revision Record
Issue Date Remarks
AMar 2021 First Issue
BMay 2021 • Updated illustration and part numbers in the Kit
Contents section.
• Updated procedures.
• Added procedures for NCRFastLane SelfServ™
Checkout (7370).

2-Pack Large Basket Module (Medium Gray)
This publication provides the steps for installing a Large Basket Module from the 7358-
K705 2-Pack Large Basket Module (Medium Gray) to a SelfServ Checkout unit. The kit
is designed using modules that are ready to be assembled at the site.
The NCRFastLane SelfServ™ Checkout with a Bagging Area (Bagwell) Module or
Large Basket (Basket) Module can be configured for either Left-hand (LH) orientation
or Right-hand (RH) orientation, which refers to the direction customers scan and bag
items.
•Left-hand (LH) orientation—Customers scan from left to right.
•Right-hand (RH) orientation—Customers scan from right to left.
Note: The orientation of the unit is determined by the position of the Lower Core
(Cabinet) Module in relation to the Bagging Area (Bagwell) Module or Large Basket
(Basket) Module.
Example: The Left-hand (LH) unit has the Cabinet positioned on the left side of the
Bagwell or Basket.

2 2-Pack Large Basket Module (Medium Gray)
Kit Contents
Part Number Description
497-0530587 Large Basket Kit (WM Medium Gray) - 2 Pack
497-0530518 Hole Plug, 2.000", WM Medium Gray (10 pcs)

2-Pack Large Basket Module (Medium Gray) 3
Part Number Description
006-8627877 Push In Rivet, 0.25", Black (50 pcs)
006-8627878 Wingnut, 1/4-20, Zinc-Plated Steel (40 pcs)
006-8628097 Plastic Knob, 1/4-20 X 5/8" Steel Stud (16 pcs)
497-0530517 Hole Plug, 1.000", Wm Medium Gray (12 pcs)
006-8627935 Screw, Flat Head, M6 X 16Mm L, Steel (32 pcs)
Note: If needed, use these screws to mount Bag Racks on the Top Trays.
497-0457054 Black Nylon Spacer 15Mm Od X 10.4Mm Id X 10Mm L (8 pcs)
497-0528528 Large Basket, Angled Tie-Bar (4 pcs)
497-0528530 Large Basket Bumper (4 pcs)
497-0528558 Large Basket, Corner Rear Fence (2 pcs)
497-0528559 Large Basket, End Fence (2 pcs)
497-0528560 Large Basket, Angled Fence (4 pcs)
497-0529344 Large Basket, Corner Top-Plate Assembly (2 pcs)
497-0530064 Big Basket V-Bagwell Tray Assy (2 pcs)
497-0529289 Silicon Rubber Adhesive-Backed Weatherstrip, 540Mm L (4 pcs)

4 2-Pack Large Basket Module (Medium Gray)
Part Number Description
795-0291828 Large Basket End Panel (WM Medium Gray) (8 Pcs)
795-0286628 Large Basket, Outer Angled Panel (WM Medium Gray) (2 pcs)
795-0286728 Large Basket, Inner Angled Panel (WM Medium Gray) (2 pcs)
795-0286828 Large Basket, Corner Center Panel (WM Medium Gray) (4 pcs)
795-0287628 Hole Cover Label For LBSCO (WM Medium Gray) (4 pcs)
795-0287828 Large Basket U-Module Assembly (WM Medium Gray) (12 pcs)
006-8628098 Plastic Knob, Red, M6X1Mm X 15Mm, Steel Stud (8 pcs)
* 497-0423108 Instructions Kit (Reference Sheet)
* Items marked with an asterisk are not called out on the image.

2-Pack Large Basket Module (Medium Gray) 5
Shipping Dimension and Weight
This section shows the approximate shipping dimension and weight for the 7358-K705
2-Pack Large Basket Module (Medium Gray).
Note: These values are for reference only.
Shipping Dimension Shipping Weight
Height Length Width Pounds (lbs) Kilograms (kgs)
2212.4 mm
(87.10 in)
1016.0 mm
(40 in)
1219.2 mm
(48 in)
505 lbs 229.06 kgs

6 2-Pack Large Basket Module (Medium Gray)
Module Dimension and Weight
This section shows the approximate dimension and weight of the 7358-K705 2-Pack
Large Basket Module (Medium Gray).
Note: These values are for reference only.
Dimension (1 Module) Weight (1 Module)
Height Length Width Pounds (lbs) Kilograms (kgs)
737.0 mm
(29.02 in)
2378.9 mm
(93.66 in)
1076.9 mm
(42.40 in)
203.0 lbs 92.08 kgs

2-Pack Large Basket Module (Medium Gray) 7
Required Tools
The 7358-K705 2-Pack Large Basket Module (Medium Gray) is designed to be assembled
without tools. But, if a push-in rivet needs to be removed NCRrecommends using any
of the following tools:
• wire cutter
• flat-head screwdriver
• pliers

8 2-Pack Large Basket Module (Medium Gray)
Installation Procedures
Installing the 7358-K705 2-Pack Large Basket Module (Medium Gray) involves the
following procedures:
1. Setting Up Modular Large Basket Corner Bagwell (Corner Bagwell) on page22.
2. Installing Corner Bagwell Assembly (7358) on page30.
3. Installing Corner Bagwell Fences on page28.
4. Setting Up Modular Large Basket Angled Bagwell (V-Bagwell) on the facing page.
5. Installing V-Bagwell Fences on page17.
6. Installing V-Bagwell Bumpers on page20.
7. Installing V-Bagwell Assembly on page34.
8. Installing Modular Large Basket Bagwell Top Trays on page36.

2-Pack Large Basket Module (Medium Gray) 9
Setting Up Modular Large Basket Angled Bagwell (V-Bagwell)
To set up the modular Large Basket Angled Bagwell (V-Bagwell), follow these steps:
Note: The procedure uses the Right-hand (RH) orientation for reference.
1. Lay the U-Module on its side as shown in the image below.
2. Attach the End Panel by doing the following:
a. Align and insert the hooks (two on each side) of the End Panel to the
corresponding slots on the U-Module.

10 2-Pack Large Basket Module (Medium Gray)
b. Slide the End Panel to engage the hooks into the U-Module slots. Ensure that the
End Panel snaps in place.
c. Verify that all hooks are properly engaged.

2-Pack Large Basket Module (Medium Gray) 11
d. Fasten the End Panel and U-Module together using two (2) push-in rivets.
3. Slightly lift the U-Module to align its slots with the hooks (two on each side) of the
End Module assembly, and then slide down to engage the hooks. Ensure that the
Modules are secure and well-aligned.

12 2-Pack Large Basket Module (Medium Gray)
4. Slightly lift the Outer Angled Panel to align its slots with the hooks of the U-Module
assembly, and then slide down to engage the hooks. Ensure that the Modules are
secure and well-aligned.
5. Slightly lift the Inner Angled Panel to align its slots with the hooks of the End
Module assembly, and then slide down to engage the hooks. Ensure that the
Modules are secure and well-aligned.

2-Pack Large Basket Module (Medium Gray) 13
6. Install an Angled Tie Bar as a frame stiffener between the U-Module and Angled
Panels. Ensure that the Tie Bar hooks are properly engaged.
7. Slightly lift the U-Module to align its slots with the hooks (two on each side) of the
Angled Panels, and then slide down to engage the hooks. Ensure that the Modules
are secure and well-aligned.

14 2-Pack Large Basket Module (Medium Gray)
8. Install an Angled Tie Bar as a frame stiffener between the U-Module and Angled
Panels. Ensure that the Tie Bar hooks are properly engaged.
9. Slightly lift the U-Module to align its slots with the hooks (two on each side) of the
U-Module assembly, and then slide down to engage the hooks. Ensure that the
Modules are secure and well-aligned.

2-Pack Large Basket Module (Medium Gray) 15
10. Attach the End Panel to the U-Module assembly by aligning its slots with the hooks
(two on each side) of the U-Module assembly, and then slide down to engage the
hooks. Ensure that the Modules are secure and well-aligned.
11. Secure each module and tie bar connection using Push-in Rivets (one on each side)
through the holes below the upper hooks, as shown in the example below.

16 2-Pack Large Basket Module (Medium Gray)
12. Do any the following:
• Install the Angled Bagwell Fences. For more information, refer to Installing V-
Bagwell Fences on the facing page.
• Install the Bagwell Bumpers. For more information, refer to Installing V-Bagwell
Bumpers on page20.
• Install the Angled Bagwell to the Corner Bagwell. For more information, refer to
Installing V-Bagwell Assembly on page34.

2-Pack Large Basket Module (Medium Gray) 17
Installing V-Bagwell Fences
There are two fences to be installed on the V-Bagwell. To install the fences, follow these
steps:
Note: For the purpose of illustration only, this procedure shows images using Right-
hand (RH) orientation.
1. Assemble the V-Bagwell. For more information, refer to Setting Up Modular Large
Basket Angled Bagwell (V-Bagwell) on page9.
2. Insert the Fence studs into the corresponding holes on the Bagwell, as shown in the
image below.