NEC Express5800/D120h User manual

NEC Express5800/D120h
System Configuration Guide
Introduction
This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and
proper configuration of your NEC Express5800 server.
October 12, 2017
Revision 1.0
NEC Corporation

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 2
Contents
TECHNICAL SPECIFICATION........................................................................................3
Specification..........................................................................................................................................3
CONFIGURATION DIAGRAM.........................................................................................5
SERVER CONFIGURATION ...........................................................................................7
1Maximum Server Module Configuration......................................................................................7
1.1 Module Enclosure (1U)........................................................................................................7
1.2 Module Enclosure (2U)........................................................................................................8
2Server Module Enclosure..............................................................................................................8
2.1 Module Enclosure................................................................................................................8
2.2 Options for Server Module Enclosure..................................................................................9
3Server Module..............................................................................................................................10
4Processors and Heat Sink ..........................................................................................................11
5Memory .........................................................................................................................................13
6Internal Storage............................................................................................................................15
6.1 Drive Configuration............................................................................................................15
6.2 Storage Controllers and Options for Module Enclosure (1U)............................................16
6.3 Storage Controllers and Options for Module Enclosure (2U)............................................17
6.4 Internal Drives....................................................................................................................18
7Optical Drive.................................................................................................................................19
8PCI Card........................................................................................................................................20
8.1 Network Interface Controller..............................................................................................20
8.2 External Storage Controller ...............................................................................................22
8.3 Serial Port Adapter.............................................................................................................22
9Other Add-in Components..........................................................................................................23
9.1 Trusted Platform Module Kit ..............................................................................................23
9.2 VMware ESXi Support Kit..................................................................................................23
9.3 Flash FDD..........................................................................................................................23
10 Add-on Components..................................................................................................................24
10.117-inch LCD Console Drawer............................................................................................24
10.2 KVM Switch........................................................................................................................24
10.3 Server Management License.............................................................................................25
REFERENCES...............................................................................................................26
External Views.....................................................................................................................................26
Front and Rear Views....................................................................................................................26
Dimensions (mm)................................................................................................................................28
Server Management............................................................................................................................29
OS Support Matrix for PCI Cards and Embedded Controller .........................................................30
Supported PCI Cards and Installable Slots......................................................................................31
Supported Tape and Removal Disk Backup Drive List ...................................................................33
Boot Mode Setting ..............................................................................................................................33
Secure Boot Mode...............................................................................................................................33
Copyright Notice and Liability Disclaimer........................................................................................34
REVISION HISTORY .....................................................................................................35

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 3
Technical Specification
Specification
Server Module (1/2)
Model
D120h
1U Server Module
2U Server Module
Part Number
N8100-2553F
N8100-2554F
Processor
Type
Intel® Xeon® Processor
Bronze 3104 (1.70 GHz, 6C/6T, 8.25MB)
Bronze 3106 (1.70 GHz, 8C/8T, 11MB)
Silver 4108 (1.80 GHz, 8C/16T, 11MB)
Silver 4110 (2.10 GHz, 8C/16T, 11MB)
Silver 4114 (2.20 GHz, 10C/20T, 13.75MB)
Silver 4116 (2.10 GHz, 12C/24T, 16.50MB)
Gold 5118 (2.30 GHz, 12C/24T, 16.50MB)
Gold 5120 (2.20 GHz, 14C/28T, 19.25MB)
Gold 5122 (3.60 GHz, 4C/8T, 16.50MB)
Gold 6130 (2.10 GHz, 16C/32T, 22MB)
Gold 6132 (2.60 GHz, 14C/28T, 19.25MB)
Gold 6134 (3.20 GHz, 8C/16T, 24.75MB)
Gold 6138 (2GHz, 20C/40T, 27.50MB)
Gold 6140 (2.30 GHz, 18C/36T, 24.75MB)
Gold 6142 (2.60 GHz, 16C/32T, 22MB)
Gold 6152 (2.10 GHz, 22C/44T, 30.25MB)
Platinum 8160 (2.10 GHz, 24C/48T, 33MB)
Platinum 8164 (2GHz, 26C/52T, 35.75MB)
Platinum 8160M (2.10 GHz, 24C/48T, 33MB)
Number of Processors
1 or 2
Chipset
Intel® C621 Chipset
Memory
Type
DDR4-2666 Registered DIMM (8/16/32GB)
DDR4-2666 TSV Registered DIMM (64GB/128GB)
Standard Capacity
0 GB
Maximum Capacity
2TB (16x 128GB) [Platinum 8160M only]
1.5TB (12x 128GB) [Others]
Memory protection
ECC, x4/x8 SDDC, DDDC
Internal Storage
Drive Cage
-
Disk Controller
SATA : 6Gb/s, RAID 0/1/5/6/10/50/60 (Optional)
SAS: 12 Gb/s, RAID 0/1/5/6/10/50/60 (Optional)
Expansion Slot
Total: 3 slots available
1 PCIe 3.0 x16 (x16 connector)
1 PCIe 3.0 x8 (x8 connector)
1 PCIe 3.0 x16 for a LAN
mezzanine card
Total: 4 slots available
1 PCIe 3.0 x16 ( x16 connector)
1 PCIe 3.0 x8 (x8 connector)
1 PCIe 3.0 x16 for a LAN
mezzanine card
1 PCIe 3.0 x16 for GPU card
Video
Controller (VRAM)
Integrated in Server Management Controller (32MB)
Resolution
1920 x 1200 / 16.7M
Interfaces
Rear
1x VGA (15-pin mini D-sub), 2x USB3.0, 2x 10GBASE-T LAN
connector (RJ-45), 1x 1000BASE-T LAN connector for Management
(RJ-45)
Power Consumption
Minimum
607 W
984 W
Heat Dissipation
Minimum
2,186 kj/h
3,543 kj/h
Dimension
(W x D x H)
171.6 × 547.5 × 40.6 mm
6.76 x 21.6 x 1.60 in
171.6 × 547.5 × 81.5 mm
6.76 x 21.6 x 3.21 in
Weight
Minimum
3.3 kg
4.2 kg
Maximum
4.2 kg
6.7 kg
Temperature, Relative Humidity
(non-condensing)
Operating: 10° to 35°C / 50° to 95°F, 20 to 80%
Non-operating: -10° to 55°C / 14° to 131°F, 20 to 80%
Regulatory and Safety
FCC, CE, UL, CB, RoHS, WEEE
Operating Systems
Microsoft® Windows Server® 2012 R2 Standard
Microsoft® Windows Server® 2012 R2 Datacenter
Microsoft® Windows Server® 2016 Standard
Microsoft® Windows Server® 2016 Datacenter

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 4
Model
D120h
Red Hat Enterprise Linux 7.3 or later 1
VMware ESXi 6.0 Update 3
VMware ESXi 6.5 Update 1 2
1 For Linux support, please contact your sales representative or go to the NEC website at:
http://www.nec.com/global/prod/express/linux/index.html
2 VMware ESXi 6.5 will be available in November, 2017.
Module Enclosure
Model
D120h
1U Module
Enclosure
(1300W PSU model)
1U Module
Enclosure
(2200W PSU model)
2U Module
Enclosure
(2200W PSU model)
Part Number
N8141-83F (for
Embedded SATA)
N8141-92F (for RAID
/ SAS HBA)
N8141-84F (for
Embedded SATA)
N8141-93F (for RAID
/ SAS HBA)
N8141-91F (for
Embedded SATA)
N8141-94F (for RAID
/ SAS HBA)
Server Module Bays
4
4
2
Internal Storage
Drive Bays
24 (6x 2.5-inch SAS/SATA drive)
Standard
0GB
Maximum
SATA HDD: 48TB (24x 2TB)
SAS HDD: 43.2TB (24x 1.8TB)
SATA SSD: 46.08TB (24x 1.92TB)
SAS SSD: 9.6TB (24x 400GB)
PSU Bays
2
Redundant Fan
Standard
Redundant PSU
Standard, Hot-plug
PSU
2x 1,300 Watt 80
PLUS® Platinum
certified
hot-plug PSU
100-240 VAC ± 10%
50 / 60 Hz ± 3Hz
2 x 2,200 Watt 80
PLUS® Platinum
certified
hot-plug PSU
100-240 VAC ± 10%
50 / 60 Hz ± 3 Hz
2 x 2,200 Watt 80
PLUS® Platinum
certified
hot-plug PSU
200-240 VAC ± 10%
50 / 60 Hz ± 3 Hz
Power Consumption
100VAC: 1177VA /
1165W
200VAC: 1494VA /
1479W
100VAC: 2369VA /
2322W
200VAC: 3159VA /
3096W
200VAC: 2637VA /
2584W
Heat Dissipation
100VAC: 4194 kJ/h
200VAC: 5325 kJ/h
100VAC: 8360 kJ/h
200VAC: 11146 kJ/h
200VAC: 9,303 kJ/h
Acoustic Noise
Idle / Max.
55.0 dB / 76.0 dB
55.0 dB / 76.0 dB
55.0 dB / 76.0 dB
Dimensions
(W x D x H)
440.0 x 820.0 x 87.5 mm / 485.0 x 820.0 x 87.5 mm w/ mount ear
17.3 x 32.3 x 3.4 in / 19.1 x 32.3 x 3.4 in w/ mount ear
Weight
Maximum
21.0 kg / 46.3 lbs
22.0 kg / 48.5 lbs
22.0 kg / 48.5 lbs
Weight
Minimum
37.8 kg / 83.3 lbs
39.0 kg / 86.0 lbs
35.0 kg / 77.2 lbs
Temperature, Relative Humidity
(non-condensing)
Operating: 10° to 35°C / 50° to 95°F, 20 to 80%
Non-operating: -10° to 55°C / 14° to 131°F, 20 to 80%
Regulatory and Safety
FCC, CE, UL, CB, RoHS, WEEE

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 5
Configuration Diagram
Configuration Diagram is the useful tool for configure D120h. This diagram shows three components. One is the standard
components, second is the selectable components, and last is the optional components. For example of 1U Module Enclosure, drive
cage, fan, rail and PSU is the standard component which has been already installed into 1U Module Enclosure. All you have to do is
purchase two nodes (Server Modules) which is the selectable components. In addition, the rest, you can install more two nodes
(server modules) as you need.
Module Enclosure (1U)
Legend: Standard Components Minimum required components Optional components
1U Server Module
Legend: Standard Components Minimum required components Optional components
24x 2.5-
inch
Drive
Cage
PSU 1/2
FAN
Node 1 (Upper)
/
Node 2 (Lower)
Rail
Rail
Node 3 (Upper)
/
Node 4 (Lower)
Node 1
Node 3
Node 2
Node 4
PSU 2
PSU 1
CPU H/S CPU H/S
4x DIMM Slot
4x DIMM Slot 4x DIMM Slot
4x DIMM Slot
1x DIMM
LAN Mezz.
Slot 2
Slot 1
PCI Slot 1
PCI Slot 2
LAN Mezz.
(Slot 3)
CPU1 CPU0
SATA
DOM
TPM

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 6
Module Enclosure (2U)
Legend: Standard Components Minimum required components Optional components
2U Server Module
Legend: Standard Components Minimum required components Optional components
24x 2.5-
inch
Drive
Cage
PSU 1/2
FAN
Node 2
Rail
Rail
Node 4
Node 2
Node 4
PSU 2
PSU 1
LAN Mezz.
Slot 2
Slot 1
PCI Slot 4 (for GPU Card)
CPU H/S CPU H/S
4x DIMM Slot
4x DIMM Slot 4x DIMM Slot
4x DIMM Slot
1x DIMM
PCI Slot 1
PCI Slot 2
LAN Mezz.
(PCI Slot 3)
CPU1 CPU0
SATA
DOM
TPM

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 7
Server Configuration
1 Maximum Server Module Configuration
See the table below for the maximum server configuration based on processor configuration.
The condition for the maximum server configuration is defined when four servers with the same configuration are installed. For other
server configurations, please consult your sales representative.
1.1 Module Enclosure (1U)
1.1.1 2200W PSU Configuration
100VAC Input (with RAID controller, PCI card and LAN mezzanine)
Processor
# of processors
# of DIMMs
(128GB TSV RDIMM)
# of drives
(1.92TB SATA SSD)
Bronze 3104/3106
2CPUs
Up to 5 DIMMs
Up to 1 drive
Up to 2 DIMMs
Up to 3 drives
Silver 4110/4114/4116
Gold 5122
2CPUs
Up to 4 DIMMs
Up to 1 drive
Up to 2 DIMMs
Up to 2 drives
Silver 4108
2CPUs
Up to 3 DIMMs
Up to 1 drive
Up to 2 DIMMs
Up to 2 drives
Gold 5118/5120
2CPUs
Up to 3 DIMMs
Up to 1 drive
Gold 6130/6138
1CPU
Up to 6 DIMMs
Up to 1 drive
Up to 1 DIMM
Up to 4 drives
Gold 6132/6134/6140/6142/6152
Platinum 8160/8164/8160M
Not supported
NOTE:
Supported configuration depends on the kind of DIMMs, drives.
Table above is just one example of configuration. For details, please contact your sales representative.
Configurations which doesn’t listed above table, please contact your sales representative.
When PSU breaks down, processor may slow down in some configurations. For details, please contact your sales representative.
200VAC Input (with RAID controller, PCI card and LAN mezzanine)
Processor
# of processors
# of DIMMs
(128GB TSV RDIMM)
# of drives
(1.92TB SATA SSD)
Any processors
Any configurations
NOTE:
Up to six 128GB TSV RDIMM per processor except Xeon Platinum 8160M.
When PSU breaks down, processor may slow down in some configurations. For details, please contact your sales representative.
1.1.2 1300W PSU Configuration
100VAC Input (with RAID controller, PCI card and LAN mezzanine)
Processor
# of processors
# of DIMMs
(128GB TSV RDIMM)
# of drives
(1.92TB SATA SSD)
Bronze 3104/3106,
Silver 4108/4110/4114/4116,
Gold 5118/5120/5122
Up to 3 server module with configuration limitation.
For details, please contact your sales representative.
Gold 6130/6132/6134/6138/
6140/6142/6152,
Platinum 8160/8164/8160M
Not supported

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 8
200VAC Input (with RAID controller, PCI card and LAN mezzanine)
Processor
# of processors
# of DIMMs
(128GB TSV RDIMM)
# of drives
(1.92TB SATA SSD)
Bronze 3104/3106,
Silver 4108/4110/4114/4116
1CPU
Up to 6 DIMMs
Up to 1 drive
Up to 1 DIMM
Up to 4 drives
Gold 5118/5120/5122
1CPU
Up to 4 DIMMs
Up to 1 drive
Up to 1 DIMM
Up to 2 drives
Gold 6130/6132/6134/6138/
6140/ 6142/6152,
Platinum 8160/8164/8160M
Not supported
NOTE:
Supported configuration depends on the kind of DIMMs, drives.
Table above is just one example of configuration. For details, please contact your sales representative.
Configurations which doesn’t listed above table, please contact your sales representative.
1.2 Module Enclosure (2U)
1.2.1 2200W PSU Configuration
200VAC Input (with RAID controller, PCI card and LAN mezzanine)
Processor
# of processors
# of DIMMs
(128GB TSV RDIMM)
# of drives
(1.92TB SATA SSD)
Any processors
Any configurations
NOTE:
Supports 200VAC inlet only.
When PSU breaks down, processor may slow down in some configurations. For details, please contact your sales representative.
2 Server Module Enclosure
2.1 Module Enclosure
Category
Product Name / Description
Part Number
Module
Enclosure
For Embedded
SATA Controller
Configuration
NEC Module Enclosure (1U, 1300W PSU Model)
no Server Module, no Drive, no Power Cord
Including : 2x 1300W Power Supply Unit, Slide Rail, EXPRESS BUILDER DVD
N8141-83F
NEC Module Enclosure (1U, 2200W PSU Model)
no Server Module, no Drive, no Power Cord
Including : 2x 2200W Power Supply Unit, Slide Rail, EXPRESS BUILDER DVD
N8141-84F
NEC Module Enclosure (2U, 2200W PSU Model)
no Server Module, no Drive, no Power Cord
Including : 2x 2200W Power Supply Unit, Slide Rail, EXPRESS BUILDER DVD
NOTE:
- Support 200VAC inlet only.
N8141-91F
Module
Enclosure
For RAID
Controller /
SAS HBA
Configuration
NEC Module Enclosure (1U, 1300W PSU Model)
no Server Module, no Drive, no Power Cord
Including : 2x 1300W Power Supply Unit, Slide Rail, EXPRESS BUILDER DVD
N8141-92F
NEC Module Enclosure (1U, 2200W PSU Model)
no Server Module, no Drive, no Power Cord
Including : 2x 2200W Power Supply Unit, Slide Rail, EXPRESS BUILDER DVD
N8141-93F
NEC Module Enclosure (2U, 2200W PSU Model)
no Server Module, no Drive, no Power Cord
Including : 2x 2200W Power Supply Unit, Slide Rail, EXPRESS BUILDER DVD
NOTE:
- Support 200VAC inlet only.
N8141-94F
NOTE:
Module enclosure has to be ordered with at least two optional server modules.

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 9
Module enclosure P/N depends on internal drive configuration. Module enclosure for embedded SATA controller configuration
[N8141-83F/-84F/-91F] supports module enclosure with embedded SATA controller configuration only. Others [N8141-92F/-93F/-
94F] supports with RAID controller configuration or SAS HBAconfiguration only.
When installing to 1U server module enclosure, up to four server modules can be installed.
When installing to 2U server module enclosure, up to two server modules can be installed.
Please connect CMC management LAN on module enclosure to management server or PC for monitoring cooling fan and PSU.
Blank modules [N8141-85] must be installed into vacant module enclosure slots.
Predecessor (ex. Express5800/E120f-M, E120g-M) server module can’t install into server module enclosure.
2.2 Options for Server Module Enclosure
2.2.1 Blank Module
Product Name / Description
Part Number
Blank Module
1pc of filter module for Module Enclosure slots.
N8141-85
NOTE:
Blank Module must be installed into vacant Module Enclosure slots.
Blank Module is for 1U Module Enclosure [N8141-83F/-84F/-92F/-93F].

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 10
3 Server Module
Product Name / Description
Part Number
NEC Express5800/D120h
1U Server Module
No processor, no RAM, no RAID Controller, no LAN mezzanine.
Including:
1st processor (CPU 0) heat sink, Internal SATA Cable
N8100-2553F
NEC Express5800/D120h
2U Server Module
No processor, no RAM, no RAID Controller, no LAN mezzanine
Including:
1st processor (CPU 0) heat sink, SAS Expander, Internal SATA Cable, Power Cord for GPU
Card(8Pin)
N8100-2554F
NOTE:
VMware ESXi 6.5 will be supported after end of Oct, 2017.
The base model must be ordered with a processor kit and a memory kit.
At least two server modules must be installed in module enclosure to configure D120h.
Note for N8100-2553F, N8100-2554F
1U server modules must be installed in N8141-83F, N8141-84F, N8141-92F or N8141-93F.
2U server modules must be installed in N8141-91F or N8141-94F.

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 11
4 Processors and Heat Sink
Available sockets: 2
Category
Product Name / Description
Part Number
Bronze 3100
Xeon Bronze 3104 Processor Kit
Intel® Xeon® Bronze 3104 (1.70 GHz, 6C/6T, 8.25MB, TDP 85W)
N8101-1092F
Xeon Bronze 3106 Processor Kit
Intel® Xeon® Bronze 3106 (1.70 GHz, 8C/8T, 11MB, TDP 85W)
N8101-1093F
Silver 4100
Xeon Silver 4108 Processor Kit
Intel® Xeon® Silver 4108 (1.80 GHz, 8C/16T, 11MB, TDP 85W)
N8101-1094F
Xeon Silver 4110 Processor Kit
Intel® Xeon® Silver 4110 (2.10 GHz, 8C/16T, 11MB, TDP 85W)
N8101-1095F
Xeon Silver 4114 Processor Kit
Intel® Xeon® Silver 4114 (2.20 GHz, 10C/20T, 13.75MB, TDP 85W)
N8101-1096F
Xeon Silver 4116 Processor Kit
Intel® Xeon® Silver 4116 (2.10 GHz, 12C/24T, 16.5MB, TDP 85W)
N8101-1097F
Gold 5100
Xeon Gold 5118 Processor Kit
Intel® Xeon® Gold 5118 (2.30 GHz, 12C/24T, 16.50MB, TDP 105W)
N8101-1098F
Xeon Gold 5120 Processor Kit
Intel® Xeon® Gold 5120 (2.20 GHz, 14C/28T, 19.25MB, TDP 105W)
N8101-1367F
Xeon Gold 5122 Processor Kit
Intel® Xeon® Gold 5122 (3.60 GHz, 4C/8T, 16.50MB, TDP 105W)
N8101-1368F
Gold 6100
Xeon Gold 6130 Processor Kit
Intel® Xeon® Gold 6130 (2.10 GHz, 16C/32T, 22MB, TDP 125W)
NOTE:
- Not supported with 1300W PSU configuration.
N8101-1369F
Xeon Gold 6132 Processor Kit
Intel® Xeon® Gold 6132 (2.60 GHz, 14C/28T, 19.25MB, TDP 140W)
NOTE:
- Not supported with 2200W PSU configuration when the voltage of inlet is
100VAC.
- Not supported with 1300W PSU configuration.
N8101-1370F
Xeon Gold 6134 Processor Kit
Intel® Xeon® Gold 6134 (3.20 GHz, 8C/16T, 24.75MB, TDP 130W)
NOTE:
- Not supported with 2200W PSU configuration when the voltage of inlet is
100VAC.
- Not supported with 1300W PSU configuration.
N8101-1371F
Xeon Gold 6138 Processor Kit
Intel® Xeon® Gold 6138 (2.00 GHz, 20C/40T, 27.50MB, TDP 125W)
NOTE:
- Not supported with 1300W PSU configuration.
N8101-1372F
Xeon Gold 6140 Processor Kit
Intel® Xeon® Gold 6140 (2.30 GHz, 18C/36T, 24.75MB, TDP 140W)
NOTE:
- Not supported with 2200W PSU configuration when the voltage of inlet is
100VAC.
- Not supported with 1300W PSU configuration.
N8101-1373F
Xeon Gold 6142 Processor Kit
Intel® Xeon® Gold 6142 (2.60 GHz, 16C/32T, 22MB, TDP 150W)
NOTE:
- Not supported with 2200W PSU configuration when the voltage of inlet is
100VAC.
- Not supported with 1300W PSU configuration.
N8101-1374F
Xeon Gold 6152 Processor Kit
Intel® Xeon® Gold 6152 (2.10 GHz, 22C/44T, 30.25MB, TDP 140W)
NOTE:
- Not supported with 2200W PSU configuration when the voltage of inlet is
100VAC.
- Not supported with 1300W PSU configuration.
N8101-1375F
Platinum 8100
Xeon Platinum 8160 Processor Kit
Intel® Xeon® Platinum 8160 (2.10 GHz, 24C/48T, 33MB, TDP 150W)
NOTE:
- Not supported with 2200W PSU configuration when the voltage of inlet is
100VAC.
- Not supported with 1300W PSU configuration.
N8101-1376F

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 12
Xeon Platinum 8164 Processor Kit
Intel® Xeon® Platinum 8164 (2.00 GHz, 26C/52T, 35.75MB, TDP 150W)
NOTE:
- Not supported with 2200W PSU configuration when the voltage of inlet is
100VAC.
- Not supported with 1300W PSU configuration.
N8101-1377F
Platinum 8100 M
Xeon Platinum 8160M Processor Kit
Intel® Xeon® Platinum 8160M (2.10 GHz, 24C/48T, 33MB, TDP 150W)
NOTE:
- The processor kit is make-to-order product.
- Not supported with 2200W PSU configuration when the voltage of inlet is
100VAC.
- Not supported with 1300W PSU configuration.
- Support up to 1.5TB/Socket memory.
(Others supports up to 768GB/socket memory.)
N8101-1378F
Heat Sink
Processor Heat Sink
For 1st Processor
(Standard)
Processor Heat Sink
For 2nd Processor
N8101-1379F
NOTE:
One processor kit from above must be installed.
The processors must be the same to configure dual processor system.
2nd CPU is required when GPU was installed in 2U Server Module.
The maximum number of logical processors supported by OS
See the table below for the maximum number of logical processors that you can actually use on your system.
Operating Systems
Maximum Logical CPUs
Supported by
Operating Systems
Maximum Logical CPUs
Microsoft Windows Server 2012 R2 Standard
Microsoft Windows Server 2012 R2 Datacenter
640 1
104
Microsoft Windows Server 2016 Standard
Microsoft Windows Server 2016 Datacenter
640 1
104
Red Hat Enterprise Linux 7
384
104
VMware ESXi 6.0
480
104
VMware ESXi 6.5
576
104
1 The maximum numbers of logical processors when using Hyper-V are below:
- Windows Server 2012 R2: 320
- Windows Server 2016: 512

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 13
5 Memory
Available slots: 8 per processor
Category
Product Name / Description
Part Number
Registered DIMM
(RDIMM)
8GB DDR4-2666 REG Memory Kit (1x8GB)
1 x 8GB Registered ECC DIMM, DDR4-2666(PC4-2666), Single Rank
N8102-703F
16GB DDR4-2666 REG Memory Kit (1x16GB)
1 x 16GB Registered ECC DIMM, DDR4-2666(PC4-2666), Dual Rank
N8102-704F
32GB DDR4-2666 REG Memory Kit (1x32GB)
1 x 32GB Registered ECC DIMM, DDR4-2666(PC4-2666), Dual Rank
N8102-705F
TSV Registered DIMM
(TSV RDIMM)
64GB DDR4-2666 TSV REG Memory Kit (1x64GB)
1 x 64GB TSV Registered ECC DIMM, DDR4-2666(PC4-2666), Quad Rank
NOTE:
- The memory kit is make-to-order product.
N8102-706F
128GB DDR4-2666 TSV REG Memory Kit (1x128GB)
1 x 128GB TSV Registered ECC DIMM, DDR4-2666(PC4-2666), Octal
Rank
NOTE:
- The memory kit is make-to-order product.
N8102-707F
NOTE:
Minimum one memory kit per processor must be installed.
It is recommended to install memory kits in multiples of six DIMMs for six-channel symmetric memory configurations to increase
memory transfer speed.
Mix configurations of RDIMM and TSV RDIMM are not supported
The type of TSV RDIMM installed must be identical.
Estimated production lead time for the make-to-order processor kits will be approximately 3 months.
Maximum Memory Capacity
See the table below for the maximum memory capacity in accordance with the type of processor installed.
Processor Type
Maximum Memory Capacity per CPU
Xeon ® Platinum 8160M
1TB
All other processors
768GB
Maximum Memory Speed
See the table below for the actual maximum memory transfer speed. DDR4 memory speed depends on the native memory bus
speed of the memory controller.
Processor Type
DIMM Speed
Xeon ® Platinum 8100 series
Xeon ® Gold 6100 series
Xeon ® Gold 5122 Processor
2666 MHz
Xeon ® Gold 5100 series excluding Xeon ® Gold 5122 Processor
Xeon ® Silver 4100 series
2400 MHz
Xeon ® Bronze 3100 series
2133 MHz
Maximum Available Memory
See the table below for the maximum memory size that you can actually use on your system.
Operating Systems
Maximum Memory Size
Supported by Operating
Systems
Maximum Available
Memory
Microsoft Windows Server 2012 R2 Standard 1
Microsoft Windows Server 2012 R2 Datacenter 1
4 TB
2 TB
Microsoft Windows Server 2016 Standard 2
Microsoft Windows Server 2016 Datacenter 2
24 TB
2 TB
Red Hat Enterprise Linux 7.3 or later
12 TB
2 TB
VMware ESXi 6.0 3
6 TB
2 TB
VMware ESXi 6.5 4
12 TB
2 TB

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 14
1 Hyper-V in Windows Server 2012 R2
- Maximum memory that apply to each Hyper-V: 4 TB
- Maximum memory that apply to each virtual machine: 1 TB
2 Hyper-V in Windows Server 2016:
- Maximum memory that apply to each Hyper-V: 24 TB
- Maximum memory that apply to each virtual machine: 12 TB
3 Up to 4 TB of the main memory is available to each virtual machine.
4 Up to 6128 GB of the main memory is available to each virtual machine.

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 15
6 Internal Storage
6.1 Drive Configuration
Refer to below table for RAID configuration.
Module Enclosure
Connection for
internal drive
Available drive cage per Server
Module
Section
Available internal
drive
1U Module Enclosure
for Embedded SATA
Controller
Configuration
Non-RAID
(Embedded SATA)
6x 2.5-inch Drive Bays (SATA)
6.2.1
SATA HDD
1U Module Enclosure
for RAID Controller /
SAS HBA
Configuration
RAID / SAS
Controller
6x 2.5-inch Drive Bays (SAS/SATA)
6.2.2
SATA HDD
SATA SSD
SAS HDD
SAS SSD
2U Module Enclosure
for Embedded SATA
Controller
Configuration
Non-RAID
(Embedded SATA)
6x 2.5-inch Drive Bays (SATA)
6.3.1
SATA HDD
2U Module Enclosure
for RAID Controller /
SAS HBA
Configuration
RAID / SAS
Controller
12x 2.5-inch Drive Bays (SAS/SATA)
6.3.2
SATA HDD
SATA SSD
SAS HDD
SAS SSD
NOTE:
Mix configuration of RAID configuration server module and SAS HBA configuration server module in a same module enclosure can
be supported.
Mix configuration of SATA HDDs and SAS HDDs in a same drive cage of server module is not supported.
Three server modules which installs SATA HDDs in a same module enclosure is not supported.
Server module which installs SATA HDDs and server module which installs SAS HDDs in a same module enclosure is not
supported.
SAS HBA[N8103-199] will be able to order after end of Oct, 2017.
All drives within a RAID array should be of the same type, capacity and rotation speed.
Up to two kinds of drives selected from SAS 10K HDDs (512n), SAS 10K HDDs (512e), SAS 15K HDDs, SAS 15K HDDs (512e),
SATAHDDs, SAS SSDs, SATA SSDs (ME) and SATASSDs (VE) can be mixed in the drive cage of server modules except the
combination of SATA HDDs and SAS HDDs.
To configure a large-capacity RAID array, it is recommended to configure in RAID 6 in order to minimize the risk of becoming
multiple hard drives failure during the RAID rebuilding process.
Maximum Internal Storage
The maximum number of available drives depends on the type of processor installed and the number of PCI cards. See the following
table to check how many drives can be installed into the server.
Module Enclosure
Processors
Number of PCI card, LAN
mezzanine installed
Maximum number of
available drives
1U for embedded SATA
configuration
Gold 6134
[N8101-1371F]
1 PCI card,
1 PCI card with LAN Mezz.
5
2 PCI cards
4
2 PCI cards with LAN Mezz.
2
Others
1 PCI card,
1 PCI card with LAN Mezz.
6
2 PCI cards
4
2 PCI cards with LAN Mezz.
2
1U for RAID controller /
SAS HBA configuration
Gold 6134
[N8101-1371F]
Any configurations
5
Others
-
6
2U for embedded SATA
configuration
Any processors
-
6
2U for RAID controller /
SAS HBA configuration
Any processors
-
12
NOTE:
Mix configuration of SATA HDDs and SAS HDDs in a same drive cage of server module is not supported.
Three server modules which installs SATA HDDs in a same module enclosure is not supported.

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 16
Server module which installs SATA HDDs and server module which installs SAS HDDs in a same module enclosure is not
supported.
Up to two kinds of drives selected from SAS 10K HDDs (512n), SAS 10K HDDs (512e), SAS 15K HDDs, SAS 15K HDDs
(512e), SATA HDDs, SAS SSDs, SATASSDs (ME) and SATA SSDs (VE) can be mixed in the drive cage of server modules
except the combination of SATA HDDs and SAS HDDs.
6.2 Storage Controllers and Options for Module Enclosure (1U)
6.2.1 Embedded SATA Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
6x 6Gb/s SATA
(Standard in
Server Module)
SATA Cable
Internal SATA Cable
1x [1x Slimline SAS –1x Slimline SAS] cable
(Standard in
Server Module)
Drive Cage
24x 2.5-inch Drive Cage
6x 2.5-inch Drive Cage per Server Module
(Standard in
Module Enclosure)
NOTE:
Module Enclosure has to be for embedded SATA controller model [N8141-83F/-84F/91F] to install module enclosure for embedded
SATAcontroller configuration.
Hot plug insertion/removal are not supported because the drives are not redundant in this configuration.
6.2.2 RAID / SAS Controller
Category
Product Name / Description
Part Number
Storage
Controller
Required
RAID
RAID Controller (0GB, RAID 0/1)
RAID 0/1/10, No cache memory, Internal 8 port, PCIe 3.0, SAS
12Gb/s, SATA 6Gb/s
N8103-188
RAID Controller (1GB, RAID 0/1)
RAID 0/1/10, 1GB cache memory, Internal 8 port, PCIe 3.0, SAS
12Gb/s, SATA 6Gb/s
N8103-176
RAID Controller (1GB, RAID 0/1/5/6)
RAID 0/1/5/6/10/50/60, 1GB cache memory, Internal 8 port, PCIe 3.0,
SAS 12Gb/s, SATA 6Gb/s
N8103-177
RAID Controller (2GB, RAID 0/1/5/6)
RAID 0/1/5/610/50/60, 2GB cache memory, Internal 8 port, PCIe 3.0,
SAS 12Gb/s, SATA 6Gb/s
N8103-178
SAS
SAS Controller
Internal 8 port, PCIe 3.0, SAS 12Gb/s, SATA 6Gb/s
N8103-199
SAS/SATA Cable
Required
Internal SAS/SATA Cable
1x [2x Mini SAS HD –1x Slimline SAS] cable
K410-356(00)
Drive Cage
24x 2.5-inch Drive Cage
6x 2.5-inch Drive Cage per Server Module
(Standard in
Module Enclosure)
NOTE:
The storage controller for all server modules in the same module enclosure must be identical.
SAS Controller [N8103-199] will be able to order after end of Oct, 2017.
SATA 1 SATA 2 SATA 3 SATA 4 SATA 5 SATA 6 SATA 7 SATA 8 SATA 9
SATA 10 SATA 11 SATA 12 SATA 13 SATA 14 SATA 15 SATA 16 SATA 17 SATA 18 SATA 19 SATA 20 SATA 21 SATA 22 SATA 23 SATA 24
Node 1 Node 2 Node 3 Node 4
SAS/SATA 1 SAS/SATA 2 SAS/SATA 3 SAS/SATA 4 SAS/SATA 5 SAS/SATA 6 SAS/SATA 7 SAS/SATA 8 SAS/SATA 9
SAS/SATA 10 SAS/SATA 11 SAS/SATA 12 SAS/SATA 13 SAS/SATA 14 SAS/SATA 15 SAS/SATA 16 SAS/SATA 17 SAS/SATA 18 SAS/SATA 19 SAS/SATA 20 SAS/SATA 21 SAS/SATA 22 SAS/SATA 23 SAS/SATA 24
Node 1 Node 2 Node 3 Node 4

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 17
Module Enclosure has to be for RAID controller/SAS HBAmodel [N8141-94F] to install module enclosure for RAID or SAS
Controller configuration.
SAS Controller [N8103-199] doesn’t support booting to disks which connected to SAS Controller. Please use with VMware ESXi
support kit (SATA DOM) [N8106-012] for booting.
D120h doesn’t support mixing configuration with disks connected to Embedded SATA and with SAS Controller [N8103-199].
We will release "lifespan monitoring tool for SAS HBA" to monitor the lifespan of SSD after Jan, 2018.
6.3 Storage Controllers and Options for Module Enclosure (2U)
6.3.1 Embedded SATA Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
6x 6Gb/s SATA
(Standard in
Server Module)
SATA Cable
Internal SATA Cable
1x [1x Slimline SAS –1x Slimline SAS] cable
(Standard in
Server Module)
Drive Cage
24x 2.5-inch Drive Cage
6x 2.5-inch Drive Cage per Server Module
(Standard in
Module Enclosure)
NOTE:
Module Enclosure has to be for embedded SATAcontroller model [N8141-83F/-84F/91F] to install module enclosure for embedded
SATAcontroller configuration.
Hot plug insertion/removal are not supported because the drives are not redundant in this configuration.
6.3.2 RAID / SAS Controller in Module Enclosure (2U)
Category
Product Name / Description
Part Number
Storage
Controller
Required
RAID
RAID Controller (0GB, RAID 0/1)
RAID 0/1/10, No cache memory, Internal 8 port, PCIe 3.0, SAS
12Gb/s, SATA 6Gb/s
N8103-188
RAID Controller (1GB, RAID 0/1)
RAID 0/1/10, 1GB cache memory, Internal 8 port, PCIe 3.0, SAS
12Gb/s, SATA 6Gb/s
N8103-176
RAID Controller (1GB, RAID 0/1/5/6)
RAID 0/1/5/6/10/50/60, 1GB cache memory, Internal 8 port, PCIe 3.0,
SAS 12Gb/s, SATA 6Gb/s
N8103-177
RAID Controller (2GB, RAID 0/1/5/6)
RAID 0/1/5/610/50/60, 2GB cache memory, Internal 8 port, PCIe 3.0,
SAS 12Gb/s, SATA 6Gb/s
N8103-178
SAS
SAS Controller
Internal 8 port, PCIe 3.0, SAS 12Gb/s, SATA 6Gb/s
N8103-199
SAS Expander
SAS Expander
SAS 12Gb/s, SATA 6Gb/s
(Standard in
Server Module)
SAS/SATA Cable
Required
Internal SAS/SATA Cable
1x [2x Mini SAS HD –1x Slimline SAS] cable,
1x [1x Slimline SAS –1x Slimline SAS] cable
K410-357(00)
Drive Cage
24x 2.5-inch Drive Cage
12x 2.5-inch Drive Cage per Server Module
(Standard in
Module Enclosure)
SATA 7 SATA 8 SATA 9
SATA 10 SATA 11 SATA 12
N/A
SATA 19 SATA 20 SATA 21 SATA 22 SATA 23 SATA 24
Node 2 Node 4
N/A
SAS/SATA 1 SAS/SATA 2 SAS/SATA 3 SAS/SATA 4 SAS/SATA 5 SAS/SATA 6 SAS/SATA 7 SAS/SATA 8 SAS/SATA 9
SAS/SATA 10 SAS/SATA 11 SAS/SATA 12 SAS/SATA 13 SAS/SATA 14 SAS/SATA 15 SAS/SATA 16 SAS/SATA 17 SAS/SATA 18 SAS/SATA 19 SAS/SATA 20 SAS/SATA 21 SAS/SATA 22 SAS/SATA 23 SAS/SATA 24
Node 2 Node 4

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 18
NOTE:
SAS Controller [N8103-199] will be able to order after end of Oct, 2017.
Module Enclosure has to be for RAID controller/SAS HBAmodel [N8141-94F] to install module enclosure for SAS HBA
configuration.
SAS Controller [N8103-199] doesn’t support booting to disks which connected to SAS Controller. Please use with VMware ESXi
support kit (SATA DOM) [N8106-012] for booting.
D120h doesn’t support mixing configuration with disks connected to Embedded SATA and with SAS Controller [N8103-199].
We will release "lifespan monitoring tool for SAS HBA" to monitor the lifespan of SSD after Jan, 2018.
6.4 Internal Drives
6.4.1 2.5-inch SATA Hard Disk Drives
Category
Product Name / Description
Part Number
512n Sector/
7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector
N8150-575
2TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 2 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector
N8150-576
NOTE:
All drives within a RAID array should be of the same type, capacity and rotation speed.
Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SATA SSDs can be mixed.
6.4.2 2.5-inch SATA Solid State Drives
Category
Product Name / Description
Part Number
Value Endurance
240GB Hot Plug 2.5-inch SATA SSD
1 x 240GB SATA SSD, 2.5-inch, 6Gb/s, 512n sector, Value Endurance
N8150-770
480GB Hot Plug 2.5-inch SATA SSD
1 x 480GB SATA SSD, 2.5-inch, 6Gb/s, 512n sector, Value Endurance
N8150-771
960GB Hot Plug 2.5-inch SATA SSD
1 x 960GB SATA SSD, 2.5-inch, 6Gb/s, 512n sector, Value Endurance
N8150-772
1.92TB Hot Plug 2.5-inch SATA SSD
1 x 1.92TB SATA SSD, 2.5-inch, 6Gb/s, 512n sector, Value Endurance
N8150-773
Middle Endurance
200GB Hot Plug 2.5-inch SATA SSD
1 x 200GB SATA SSD, 2.5-inch, 6Gb/s, 512n sector, Middle Endurance
N8150-767
400GB Hot Plug 2.5-inch SATA SSD
1 x 400GB SATA SSD, 2.5-inch, 6Gb/s, 512n sector, Middle Endurance
N8150-768
800GB Hot Plug 2.5-inch SATA SSD
1 x 800GB SATA SSD, 2.5-inch, 6Gb/s, 512n sector, Middle Endurance
N8150-769
NOTE:
2.5-inch SATA solid state drives are supported with RAID controller or SAS controller configurations.
All drives within a RAID array should be of the same type, capacity.
Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SATA SSDs can be mixed.
2.5-inch SAS Hard Disk Drives
Category
Product Name / Description
Part Number
512n Sector /
10,000 rpm
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector
N8150-577
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector
N8150-578
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector
N8150-579
512e Sector /
10,000 rpm
1.2TB 10K Hot Plug 2.5-inch SAS HDD
1 x 1.2TB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512e sector
N8150-580
1.8TB 10K Hot Plug 2.5-inch SAS HDD
1 x 1.8TB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512e sector
N8150-581
512n Sector /
15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512n sector
N8150-583
600GB 15K Hot Plug 2.5-inch SAS HDD
1x 600 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512n sector
N8150-584
512e sector drives are not available for VMware ESXi 6.0 system.

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 19
All drives within a RAID array should be of the same type, capacity and rotation speed.
Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SATA SSDs can be mixed.
To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in order to minimize the risk of
becoming multiple hard drives failure during the RAID rebuilding process.
6.4.4 2.5-inch SAS Solid State Drives
Category
Product Name / Description
Part Number
Middle Endurance
400GB Hot Plug 2.5-inch SAS SSD
1 x 400GB SAS SSD, 2.5-inch, 12Gb/s, 512n sector, Middle Endurance
N8150-766
NOTE:
Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SATA SSDs can be mixed.
7 Optical Drive
Category
Product Name / Description
Part Number
External
External DVD Dual Drive
Slim DVD Dual drive, USB bus powered, not including writing software,
Cable length: 60cm
DVD read speed: 8x (DVD-ROM / -R / -RW / -R DL / +R / +RW / +R DL)
CD read speed: 24x (CD-ROM / -R / -RW)
N8160-101F
NOTE:
Optical disk drive is required for OS Installation and system maintenance.

SYSTEM CONFIGURATION GUIDE –NEC Express5800/D120h
NEC Corporation Revision 1.0 –October, 2017 20
8 PCI Card
Please refer to Supported PCI Cards and Installable Slots with regard to the position of PCI slot which can mount PCI card
supported.
8.1 Network Interface Controller
Category
Product Name / Description
Part Number
LOM
10GbE
Dual Port 10GBASE-T LOM
Intel® Ethernet Controller X550-AT2
PCIe 3.0(x4)
(Standard)
Adapter
1GbE
1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0(x1)
N8104-150
Dual Port 1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0(x1)
NOTE:
- Network cables with RJ-45 plug covers cannot be used.
N8104-151
Quad Port 1000BASE-T Adapter
Broadcom ® BCM5719 Gigabit Ethernet Controller
PCIe 2.0(x4)
NOTE:
- Network cables with RJ-45 plug covers cannot be used.
- Up to 1 x N8104-152 can be installed into server module with Windows
Server.
N8104-152
10GbE
10GBASE SFP+ Adapter (SFP+/2ch)
QLogic NetXtreme II BCM57810S
PCIe 2.0(x8)
NOTE:
- - N8104-129 SFP+ Module is required to connect with an optical cable.
N8104-149
Dual Port 10GBASE-T Adapter
Intel® Ethernet Controller X550
PCIe 3.0(x4)
N8104-157
10GBASE Adapter (SFP+/2ch)
Intel® Ethernet Converged Network Adapters X710
PCIe 3.0(x8)
NOTE:
- N8104-129 SFP+ Module is required to connect with an optical cable.
N8104-158
10GBASE Adapter (QSFP+/4ch)
Intel® Ethernet Converged Network Adapters XL710
PCIe 3.0(x8)
NOTE:
- Only 10Gb connection is supported for higher level network.
- N8104-161 QSFP+ Module is required to connect
- Use optical breakout cable for N8104-161.
N8104-159
LAN
Mezzanine
1GbE
Quad Port 1000BASE-T Adapter
Intel Ethernet Controller i350-AM4, PCIe2.0 x4
RJ.5 connector
NOTE:
- The connector is 4x RJ.5. Please purchase required number of K410-
366(0A) to connect RJ45 cable.
N8104-168
10GbE
Dual Port 10GBASE-SFP+ Adapter
QLogic BCM57810S, PCIe 2.0 x8
NOTE:
- N8104-129 SFP+ Module is required to connect with an optical cable.
N8104-170
SFP
Module
10GbE
SFP+ Module (10G-SR)
1 x SFP+ Module
N8104-129
QSFP+ Module
1 x QSFP+ Module for N8104-159
N8104-161
Cable
1GbE
RJ.5 Conversion Cable
RJ.5 –RJ45 conversion cable, 25cm, one cable
NOTE:
- K410-366(0A) is for N8104-168. Please purchase required number of
K410-366(0A) if you install N8104-168.
K410-366(0A)
NOTE:
Network performance depends on the application running on the system and the memory bandwidth. Installing more than six ports
of 10G LAN (including on-board 2-port LAN) may degrade network performance. If network throughput is important, we
recommend that you evaluate the performance with your systems in advance.