NEC NEC Express5800 Series User manual

Chapter 1 General Description
Chapter 2 Preparations
Chapter 3 Setup
Chapter 4 Appendix
NEC Express Server
Express5800 Series
Express5800/T110i
EXP334, 334A
User's Guide
10.116.02-101.02
Aug 2018
©NEC Corporation 2018

Manuals
Express5800/T110i User’s Guide
2
Manuals
Manuals for this product are provided as booklets ( ) and electronic manuals ( ) in EXPRESSBUILDER.
Safety Precautions and
Regulatory Notices
Describes points of caution to ensure the safe use of this server.
Read these cautions before using this server.
Getting Started Describes how to use this server, from unpacking to operations.
See this guide first and read the outline of this product.
User’s Guide
Chapter 1: General Description Overviews, names, and functions of the server’s parts
Chapter 2: Preparations Installation of additional options, connection of peripheral devices,
and suitable location for this server
Chapter 3: Setup System BIOS configurations and summary of EXPRESSBUILDER
Chapter 4: Appendix Specifications and other information
Installation Guide (Windows)
Chapter 1: Installing Windows Installation of Windows and drivers, and precautions for installation
Chapter 2: Installing Bundled
Software
Installation of NEC ESMPRO, Universal RAID Utility, and other
bundled software
Maintenance Guide
Chapter 1: Maintenance Server maintenance and troubleshooting
Chapter 2: Useful Features The details of system BIOS settings, RAID Configuration Utility, and
EXPRESSBUILDER
Chapter 3: Appendix Error messages and Windows Event Logs
Other manuals
The details of NEC ESMPRO, Universal RAID Utility, and other features
PDF
PDF
PDF
PDF
PDF
EXPRESSBUILDER

Contents
Express5800/T110i User’s Guide 3
Contents
Manuals.................................................................................................................................................................2
Contents ................................................................................................................................................................ 3
Conventions Used in This Document .................................................................................................................... 6
Signs and symbols for safety ........................................................................................................................6
Notations used in the text..............................................................................................................................7
Optical disk drive
...........................................................................................................................................7
Hard disk drive ..............................................................................................................................................7
Removable media .........................................................................................................................................7
Abbreviations of Operating Systems ............................................................................................................. 8
POST ........................................................................................................................................................... 8
BMC ...........................................................................................................................................................8
Trademarks ...........................................................................................................................................................9
License Notification .............................................................................................................................................10
Warnings and Additions to This Product and Document...................................................................................... 13
Latest editions.............................................................................................................................................13
Safety notes ................................................................................................................................................ 13
Warning labels ............................................................................................................................................14
Handling precautions ..................................................................................................................................15
Chapter 1 General Description.........................................................................................................................17
1. Introduction .................................................................................................................................................18
2. Accessories.................................................................................................................................................19
3. Features...................................................................................................................................................... 20
3.1
Firmware and Software Version Management .................................................................................21
4. Names and Functions of Parts....................................................................................................................22
4.1
Front of the Server...........................................................................................................................22
4.2
Rear View ........................................................................................................................................ 23
4.3
Internal View .................................................................................................................................... 24
4.4
Motherboard ....................................................................................................................................26
4.5
Indicators .........................................................................................................................................27
4.5.1
POWER LED ( ) ...........................................................................................................27
4.5.2
STATUS LED 1, 2 (1- -2) ...............................................................................................27
4.5.3 Global HDD LED (1- -2 )............................................................................................... 29
4.5.4
Power Capping LED ..........................................................................................................29
4.5.5 Optical Disk Access LED ................................................................................................... 29
4.5.6 LED on a hard disk drive ................................................................................................... 30
4.5.7 LINK/ACT LED ( 1, 2, M)................................................................................... 31
4.5.8 SPEED LED ( 1, 2, M)....................................................................................... 31
4.5.9 AC POWER LED ...............................................................................................................31
Chapter 2 Preparations ....................................................................................................................................32
1. Installing Internal Optional Devices .............................................................................................................33
1.1
Safety Precautions........................................................................................................................... 33
1.2
Overview of Installation and Removal..............................................................................................34
1.3 Removing the Side Cover ................................................................................................................35

Contents
Express5800/T110i User’s Guide
4
1.4 Removing the Front Bezel ...............................................................................................................36
1.5 TPM Kit ............................................................................................................................................ 37
Installation .........................................................................................................................37 1.5.1
1.6 DIMM ...............................................................................................................................................38
Maximum supported memory size ..................................................................................... 39 1.6.1
Installation order ................................................................................................................39 1.6.2
Installation .........................................................................................................................40 1.6.3
Removal ............................................................................................................................41 1.6.4
1.7 Use of Internal Hard Disk Drives in the RAID System .....................................................................42
Notes on setting up a RAID system ................................................................................... 44 1.7.1
1.8 Flash Backup Unit for RAID Controller.............................................................................................46
Handling precautions .........................................................................................................46 1.8.1
Installing the flash backup unit...........................................................................................46 1.8.2
Removal ............................................................................................................................49 1.8.3
1.9 PCI Card ..........................................................................................................................................50
Notes ................................................................................................................................. 51 1.9.1
List of optional devices and installation slots .....................................................................52 1.9.2
Installation .........................................................................................................................54 1.9.3
Configuration after installing .............................................................................................. 55 1.9.4
Removal ............................................................................................................................56 1.9.5
Installing the N8117-01A extra RS-232C connector kit ......................................................56 1.9.6
1.10 Power Supply Fan ...........................................................................................................................58
Installation .........................................................................................................................58 1.10.1
Removal ............................................................................................................................59 1.10.2
1.11 HDD Cages and Hard Disk Drives...................................................................................................60
Installing a 3.5-inch fixed HDD cage and hard disk drives .................................................61 1.11.1
Removing the 3.5-inch fixed hard disk drives .................................................................... 63 1.11.2
Removing the 3.5-inch fixed HDD cage............................................................................. 64 1.11.3
Installing the 3.5-inch HDD cage and hard disk drives ...................................................... 65 1.11.4
Removing the 3.5-inch hard disk drives............................................................................. 68 1.11.5
Removing the 3.5-inch HDD cage ..................................................................................... 69 1.11.6
Installing the 2.5-inch HDD cage and hard disk drives ...................................................... 70 1.11.7
Removing the 2.5-inch hard disk drives............................................................................. 73 1.11.8
Removing the 2.5-inch HDD cage ..................................................................................... 74 1.11.9
1.12 Optical Disk Drive ............................................................................................................................75
Replacing drives ................................................................................................................75 1.12.1
Removal ............................................................................................................................75 1.12.2
1.13 Backup Devices ...............................................................................................................................76
Installation .........................................................................................................................76 1.13.1
Removal ............................................................................................................................77 1.13.2
1.14 Supporting High-temperature Environment...................................................................................... 78
1.15 Connecting Cables ..........................................................................................................................79
Internal interface cables.....................................................................................................79 1.15.1
Power cables .....................................................................................................................89 1.15.2
1.16 Attaching the Front Bezel................................................................................................................. 93
1.17 Installing the Side Cover ..................................................................................................................94
2. Installation and Connection.........................................................................................................................95
2.1 Installation........................................................................................................................................95
Preparation for installation .................................................................................................97 2.1.1
2.2 Connection.......................................................................................................................................98
Interface cables .................................................................................................................99 2.2.1
Power cord ...................................................................................................................... 101 2.2.2
Chapter 3 Setup ............................................................................................................................................. 102
1. Turning on the Server................................................................................................................................ 103
1.1 POST............................................................................................................................................. 104
POST sequence .............................................................................................................. 104 1.1.1
POST error messages ..................................................................................................... 106 1.1.2
2. System BIOS Setup .................................................................................................................................. 107
2.1 Overview........................................................................................................................................ 107
2.2 Starting SETUP Utility.................................................................................................................... 107

Contents
Express5800/T110i User’s Guide 5
2.3 Description on On-Screen Items and Key Usage .......................................................................... 108
2.4 Cases that Require Setting Changes............................................................................................. 110
3. EXPRESSSCOPE ENGINE 3................................................................................................................... 112
3.1 Overview........................................................................................................................................ 112
3.2 EXPRESSSCOPE ENGINE 3 Network Configuration ................................................................... 112
4. EXPRESSBUILDER.................................................................................................................................. 114
4.1 Features of EXPRESSBUILDER ................................................................................................... 114
4.2 Usage of EXPRESSBUILDER ....................................................................................................... 114
5. Installing Software Components ............................................................................................................... 115
6. Turning off the Server................................................................................................................................ 116
Chapter 4 Appendix ....................................................................................................................................... 117
1. Specifications............................................................................................................................................ 118
1.1 Express5800/T110i (EXP334)........................................................................................................ 118
1.2 Express5800/T110i (EXP334A) ..................................................................................................... 120
2. Interrupt Lines ........................................................................................................................................... 122
3. Glossary.................................................................................................................................................... 123
4. Revision Record........................................................................................................................................ 125

Conventions Used in This Document
Express5800/T110i User’s Guide
6
Conventions Used in This Document
Signs and symbols for safety
WARNING and CAUTION are used in this guide as following meaning.
WARNING Indicates there is a risk of death or serious personal injury
CAUTION Indicates there is a risk of burns, other personal injury, or property damage
Precautions and notices against hazards are presented with one of the following three symbols. The individual
symbols are defined as follows:
Attention This symbol indicates the presence of a hazard if
the instruction is ignored.
An image in the symbol illustrates the hazard type.
Prohibited
Action
This symbol indicates prohibited actions. An image
in the symbol illustrates a particular prohibited
action.
Mandatory
Action
This symbol indicates mandatory actions. An
image in the symbol illustrates a mandatory action
to avoid a particular hazard.
(Example in this guide)
WARNING
Use only the specified outlet
Use a grounded outlet with the specified voltage. Use of an improper power source
may cause a fire or a power leak.
(Example)
(Example)
(Example)
(Disconnect a plug)
Symbol to draw
attention
Description of a warning Term indicating a degree of danger

Conventions Used in This Document
Express5800/T110i User’s Guide 7
Notations used in the text
In addition to safety-related symbols urging caution, three other types of notations are used in this document.
These notations have the following meanings.
Important Indicates critical items that must be followed when handling hardware or operating software. If
the procedures described are not followed, server failure, data loss, and other serious
malfunctions could occur.
Note Indicates items that must be confirmed when handling hardware or operating software.
Tips Indicates information that is helpful to keep in mind when using this server.
Optical disk drive
This server is equipped with one of the following drives. These drives are referred to as optical disk drive in this
document.
DVD-ROM drive
DVD Super MULTI drive
DVD Dual drive
Hard disk drive
Unless otherwise stated, hard disk drive described in this document refers to the following.
Hard disk drive (HDD)
Solid state drive (SSD)
Removable media
Unless otherwise stated, removable media described in this document refers to the following.
USB flash drive
Flash FDD

Conventions Used in This Document
Express5800/T110i User’s Guide
8
Abbreviations of Operating Systems
Windows Operating Systems are referred to as follows.

See Chapter 1 (1.2 Supported Windows OS) in Installation Guide (Windows) for detailed information.
Notations in this document Official names of Windows
Windows Server 2016
Windows Server 2016 Standard
Windows Server 2016 Datacenter
Windows Server 2016 Essentials
Windows Server 2012 R2
Windows Server 2012 R2 Standard
Windows Server 2012 R2 Datacenter
Windows Server 2012 R2 Foundation
Windows Server 2012
Windows Server 2012 Standard
Windows Server 2012 Datacenter
POST
POST described in this document refers to the following.
Power On Self-Test
BMC
BMC described in this document refers to the following.
Baseboard Management Controller

Trademarks
Express5800/T110i User’s Guide 9
Trademarks
EXPRESSSCOPE are registered trademarks of NEC Corporation.
Microsoft, Windows, and Windows Server are registered trademarks or trademarks of Microsoft Corporation in the United States and
other countries.
Intel, Celeron, Pentium, Core i3, and Xeon are registered trademarks of Intel Corporation of the United States.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their respective
trademark owners.

License Notification
Express5800/T110i User’s Guide
10
License Notification
Open source software of following license is included in the part of this product (system BIOS).
EDK/EDKII
UEFI Network Stack II and iSCSI
Crypto package using WPA Supplicant
Open source software of following license is included in the part of this product (Off-line Tools).
EDK/EDKII
EDK/EDKII
BSD License from Intel
Copyright (c) 2012, Intel Corporation
All rights reserved.
Copyright (c) 2004, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
・ Redistributions of source code must retain the above copyright notice, this list of conditions and the following
disclaimer.
・ Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
・ Neither the name of the Intel Corporation nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

License Notification
Express5800/T110i User’s Guide 11
UEFI NETWORK STACK II and iSCSI
OpenSSL License
-------
Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.
(http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products
derived from this software without prior written permission. For written permission, please contact
[email protected].
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their
names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL
PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young ([email protected]).
This product includes software written by Tim Hudson ([email protected]).

License Notification
Express5800/T110i User’s Guide
12
AMI CRYPTO LIBRARY USING WPA SUPPLICANT
WPA Supplicant
-------
Copyright (c) 2003-2016, Jouni Malinen <[email protected]> and contributors
All Rights Reserved.
This program is licensed under the BSD license (the one with advertisement clause removed).
If you are submitting changes to the project, please see CONTRIBUTIONS file for more instructions.
License
-------
This software may be distributed, used, and modified under the terms of
BSD license:
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOTLIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Warnings and Additions to This Product and Document
Express5800/T110i User’s Guide 13
Warnings and Additions to This Product and Document
1. Unauthorized reproduction of the contents of this document, in part or in its entirety, is prohibited.
2. This document is subject to change at any time without notice.
3. Do not make copies or alter the document content without permission from NEC Corporation.
4. If you have any concerns, or discover errors or omissions in this document, contact your sales
representative.
5. Regardless of article 4, NEC Corporation assumes no responsibility for effects resulting from your
operations.
6. The sample values used in this document are not the actual values.
Keep this document for future reference.
Latest editions
This document was created based on the information available at the time of its creation. The screen images,
messages and procedures are subject to change without notice. Substitute as appropriate when content has
been modified.
The most recent version of the guide, as well as other related documents, is also available for download from
the following website.

http://www.nec.com/
Safety notes
To use this server safely, read thoroughly Safety Precautions and Regulatory Notices that comes with your
server.

Warnings and Additions to This Product and Document
Express5800/T110i User’s Guide
14
Warning labels
Warning labels are attached on or near the components with potential hazards. These labels are either attached
or printed on the component.
Do not remove or black out this label and keep it clean. If no labels are attached or printed on the server, contact
your sales representative.

Warnings and Additions to This Product and Document
Express5800/T110i User’s Guide 15
Handling precautions
Be sure to observe the following precautions for the proper functioning of the server. Ignoring the precautions
may cause server malfunction or failure.
Do not use any cell phones and switch off them near the server. Electric waves from such devices can cause
server to malfunction.
Install the server in an appropriate place. For details, see Chapter 2 (2. Installation and Connection).
If a peripheral device is a not plug-and-play device, make sure that the server is off and unplug the power
cord before connecting/removing cables to/from the devices.
Connect the provided power cord to a 100/200 VAC outlet.
Make sure that the access LED on the server is off before turning off the power or ejecting an optical disk.
Wait for at least 30 seconds before turning on the server after turning off the server. If any Uninterruptible
Power Supply (UPS) unit is connected, set it to wait for at least 30 seconds before turning on the server after
power off.
Do not press the POWER switch to turn on the server before the STATUS LED (amber) is unlit.
Turn off the server and unplug the power cord before moving it.
Regularly clean the server to prevent various types of failure. See Chapter 1 Maintenance (2. Daily
Maintenance) in Maintenance Guide for details.
Momentary voltage drop may occur due to lightning strike. To prevent this, use of UPS is recommended.
We do not guarantee that the server’s optical disk drive will play a copy-protected CD that does not conform
to standards.
In the following cases, check and adjust the system clock before operation.
After transportation
After storage
After the server is used following a period of disuse, in which storage conditions did not conform to those
that guarantee server operations (temperature: 5C to 40C (when the high-temperature environment is
set: 5 to 48°C (it's subject to composition restrictions.)); humidity: 10% to 85% (10% to 80% (when
internal LTO is installed)).
Check the system clock approximately once per month.
We recommend you store the server at room temperature. Keep the following storage conditions.
Temperature: 10C to 55C, Humidity: 10% to 85% (10% to 80% (when internal LTO is installed), No
condensation of moisture)
Do not power off or reset the server, nor disconnect the power cord before POST completes.
If this server, internal optional devices, and media set for the backup devices (tape cartridges) are moved
from a cold place to a warm place in a short time, condensation will occur and cause malfunctions and
failures when these are used in such state. To protect important stored data and property, make sure to wait
for a sufficient period to use the server and components in the operating environment.
Reference: Time effective at avoiding condensation in winter (more than 5C or more differences between
the room temperature and atmospheric temperature)
Disk devices: Approximately 2 to 3 hours Tape media: Approximately 1 day
For optional devices, we recommend you use our NEC products. Even if they are successfully installed or
connected, installation of unsupported devices can cause the server to malfunction or even failure. You will
be charged to repair failure or damage caused by use of such products even within warranty period.

Warnings and Additions to This Product and Document
Express5800/T110i User’s Guide
16
Using a computer extensively may affect different parts of your body. Here are tips you should follow while working on
a computer to minimize strain on your body.
Keep proper posture
The basic body position for using a computer is sitting straight with
your hands on the keyboard parallel with the floor, and your eyes
directed slightly downward toward the monitor. With the proper
posture described above, no unnecessary strain is applied on any
part of your body, in other words when your muscles are most
relaxed.
Working on the computer with bad posture such as hunching over or
being too close to the monitor could cause fatigue or deteriorated
eyesight.
Adjust the angle of your display
Most display units are designed for adjustment of the horizontal and
vertical angles. This adjustment is important to prevent the screen
from reflecting bright lights and to make the display contents easy to
see. Working without adjusting the display to a comfortable angle
makes it difficult for you to maintain a proper posture and you will
get tired easily. Adjust the viewing angle before use.
Adjust the brightness and contrast of the display
Display screens have functions to control brightness and contrast.
The most suitable brightness/contrast depends on age, individuals,
and environment, so adjust it to suit your preferences. A too bright
or too dark display is bad for your eyes.
Adjust the angle of keyboard
Some keyboards are ergonomically designed, which allow the angle
to be adjusted. Adjusting the angle of the keyboard is effective to
reduce tension on your shoulders, arms, and fingers.
Clean your equipment
Keeping your equipment clean is important not only for the appearance but also for functional and safety reasons. A
dusty monitor makes it difficult to see the display contents, so clean it regularly.
Take rest breaks
When you feel tired, take a break. Light exercise is also
recommended.
Tips for your health and safety

Express5800/T110i User’s Guide 17
NEC Express5800 Series
Express5800/T110i
General Description
This chapter introduces the features of this server and the name of each part.
1. Introduction
2. Accessories
Describes the accessories of the server.
3. Features
Describes the features of the server and the server management.
4. Names and Functions of Parts
Describes the name of each part contained in the server.

1. Introduction
Express5800/T110i User’s Guide
18
Chapter 1 General Description
1. Introduction
Thank you for purchasing this NEC Express5800 Series product.
This high performance server is powered by the latest Intel processor.
● Intel Xeon Processor
● Intel Core i3 Processor
● Intel Pentium Processor
● Intel Celeron Processor
NEC’s latest technology and architectures realize high-power and high-speed operation that cannot be matched
by existing servers.
The server is designed with consideration of not only reliability but also expandability, which enables you to use
it as a network server.
To use the server correctly and to bring out the server's performance, read this document carefully.

2. Accessories
Express5800/T110i User’s Guide 19
Chapter 1 General Description
2. Accessories
The carton box contains various accessories which are required for setup or maintenance. Make sure you
have them all for future use.
2Bezel Lock Key
8Screw for fix to back-up devices
1or 2*1 Power Cord
SDR Update CD-ROM
1or 2*1 Cable Ties (for securing AC power cord)
Getting Started
Safety Precautions and Regulatory Notices
*1 EXP334A only
Make sure you have all accessories and inspect them. If an accessory is missing or damaged, contact your
sales representative.
Important The chassis serial number plate and maintenance label is located on the
server. If the serial number does not match the number on the warranty, you
may not be guaranteed against failure even within the warranty period.
Contact your sales representative if they do not match.

3. Features
Express5800/T110i User’s Guide
20
Chapter 1 General Description
3. Features
The server has the following standard features:
High performance
Intel Xeon, Pentium, Core-i3, Celeron processor
Turbo Boost feature *1
Hyper Threading feature *1
High-speed memory access (DDR4 2400 supported)
High-speed disk access (SATA2 6 Gbps, SAS 12 Gbps supported)
High-speed 1000BASE-T (2 ports) interface
(1 Gbps/100 Mbps/10 Mbps supported)
High reliability
Processor throttle-ring feature
Memory monitoring feature (error correction/error detection)
Memory degeneracy feature (logical isolation of a failed device)
Bus parity error detection
Temperature detection
Error detection
Internal fan monitoring feature
Internal voltage monitoring feature
RAID system (disk array)
Auto rebuild feature (hot swapping supported)
BIOS password feature
The security lock that comes with Front Bezel
HDD (hot swapping supported)
Management utilities
NEC ESMPRO
ExpressUpdate
Remote controlling feature (EXPRESSSCOPE Engine 3)
RAID system management utility (Universal RAID Utility)
Hard disk drive monitoring
Power saving and noiseless design
Power monitoring feature
Power control feature
High-efficiency power supply supporting 80 PLUS Platinum / Gold.
Fan control appropriate to environment, work load, and configuration
Enhanced Intel SpeedStep Technology supported
Cold redundant feature*2
Expandability
Various IO option slots
PCI Express 3.0 (x 16 lanes) : 1 slot
PCI Express 3.0 (x 4 lanes): 1 slot
PCI Express 2.0 (x 2 lanes): 1 slots
PCI Express 2.0 (x 1 lanes): 1 slots
Large memory of up to 64 GB
Backup device bay provided as standard
USB 3.0 interface (requires the supporting OS)
Three LAN connectors (one for management LAN)