netAlly LinkRunner AT User manual

LinkRunner™AT
Network Auto-Tester
Quick Start Guide
The LinkRunner AT is a portable device that
allows networking professionals to easily verify
network availability and copper and fiber cable
connectivity, identify networks and ports, and
generate reports. LinkRunner AT 2000 can act as
a packet reflector for performance tests run by
other NetAlly testers.
Link-Live Cloud Service is a free, online
system for collecting, organizing, and reporting
your connection test results, which are
automatically uploaded once your LinkRunner AT
is claimed and configured.
LinkRunner Manager is a Windows PC
application for locally updating your software,
creating profiles, storing results, and generating
reports. You can download LinkRunner Manager
from NetAlly.com/products/LinkRunner.
LinkRunner AT’s key features include:
•Multiple user-configured AutoTests.
•TruePower™ Power over Ethernet (PoE) testing
up to 30 W with LinkRunner AT 2000.
•Ethernet speed and duplex verification at 10/100
Gigabit rates.
•Twisted pair and fiber optic link identification.
•Cable length measurement, fault location, fault
type detection, and wiremap verification.
•Nearest switch identification with port number,
VLAN, and IP subnet provisioned.
•DHCP, DNS, and Gateway connectivity tests.
•Ping and TCP port connectivity tests with up to
10 user-selected targets.
Get the complete LinkRunner AT Network
Auto-Tester User Manual at NetAlly.com/
products/LinkRunner.
1Power Up and Connect
a) Charge the internal battery by plugging the
included power supply into the charging port.
The battery will fully charge in 3 hours.
b) Press the power button to start up the unit.
c) Connect your LinkRunner AT to an active
Internet connection using the Ethernet port.
Your LinkRunner AT is now ready to perform tests
on your network and display results.
2Sign Up/Sign In
a) To get started with Link-Live, create a user
account at Link-Live.com.

b) Follow the instructions in the activation email
you receive from Link-Live.
c) Then, sign in.
3Claim to Link-Live
a) The first time you sign in to Link-Live, a pop-up
window appears prompting you to claim a
device.
If you already have units claimed in Link-Live,
navigate to the Units page from the
left side navigation menu, and click
the Claim Unit button at the lower
right corner.
b) Select your device (LinkRunner AT), and follow
the on-screen instructions to finish claiming.
c) For more information on using Link-Live, open
Support from the left side menu.
Register
Register your product at NetAlly.com/
Registration to receive update information.
*770-000047*
PN 770-
000047
07/2019
© 2019
NetAlly