1Power Up and Connect
a) Charge the internal battery by plugging the
included power supply into the charging port.
The battery will fully charge in 3 hours.
b) Press the power button to start up the unit.
c) Connect your LinkRunner AT to an active
Internet connection using the Ethernet port.
Your LinkRunner AT is now ready to perform tests
on your network and display results.
2Sign Up/Sign In
a) To get started with Link-Live, create a user.
b) Follow the instructions in the activation email
you receive from Link-Live.
c) Then, sign in.
3Claim to Link-Live
a) The first time you sign in to Link-Live, a pop-up
window appears prompting you to claim a
device.
If you already have units claimed in Link-Live,
navigate to the Units page from the
left side navigation menu, and click
the Claim Unit button at the lower
right corner.
b) Select your device (LinkRunner AT), and follow
the on-screen instructions to finish claiming.
c) For more information on using Link-Live, open
Support from the left side menu.
LinkRunner™AT
Network Auto-Tester
The LinkRunner AT is a portable device that
allows networking professionals to easily verify
network availability and copper and ber cable
connectivity, identify networks and ports, and
generate reports. LinkRunner AT 2000 can act as
a packet reector for performance tests run by
other NetAlly testers.
Link-Live Cloud Service is a free, online
system for collecting, organizing, and reporting
your connection test results, which are auto-
matically uploaded once your LinkRunner AT is
claimed and congured.
LinkRunner Manager is a Windows PC
application for locally updating your soware,
creating profiles, storing results, and
generating reports.
Quick Start Guide
Power
Button
Cable test
wiremap-
ping input
RJ-45 Ethernet Port
10/100/1000
Charging
Port
Charging
Indicator
LED
Kensington
Lock
mini-USB
Port
Battery
cover
and
screw
Network
Connection
Indicator
LED
Tx/Rx
Indicator LED
LCD Display
(Model 2000 only)
LinkRunner AT’s key features include:
•Multiple user-congured AutoTests.
• TruePower™ Power over Ethernet (PoE) testing
up to 30 W with LinkRunner AT 2000.
•Ethernet speed and duplex verication at 10/100
Gigabit rates.
•Twisted pair and ber optic link identication.
• Cable length measurement, fault location, fault
type detection, and wiremap verication.
•Nearest switch identication with port number,
VLAN, and IP subnet provisioned.
• DHCP, DNS, and Gateway connectivity tests.
• Ping and TCP port connectivity tests with up to
10 user-selected targets.
F1 F2
SELECT
Soft Key
Home
Soft Key
Back
Clear/
Refresh
Save
data
Navigation
buttons
