NetApp E Series User manual

NetApp® E-Series Storage Systems
Model 3040 40U Cabinet Guide
NetApp, Inc.
495 East Java Drive
Sunnyvale, CA 94089
U.S.
Telephone: [phone]
Fax: [phone]
Support telephone: [phone]
Web: http://www.netapp.com
Feedback: [email protected]
Part number: 215-08325_A0
Release date: December 2013

Table of Contents - i
Table of Contents
Specifications of the Model 3040 40U Cabinet.......................................................................................................... 1
Power Requirements and Heat Dissipation..............................................................................................................3
Maximum Number of Drive Trays.............................................................................................................................4
Installing the Cabinet....................................................................................................................................................7
Gathering the Required Tools and Equipment......................................................................................................... 7
Preparing to Move the Cabinet.................................................................................................................................8
Estimating the Cabinet Weight...........................................................................................................................8
Acclimating the Cabinet......................................................................................................................................9
Removing the Packing Material........................................................................................................................10
Checking the Shipping Contents......................................................................................................................10
Removing the Components.............................................................................................................................. 10
Moving the Cabinet................................................................................................................................................. 10
Completing the Installation........................................................................................................................................ 12
Lowering the Leveling Glides and the Stability Foot.............................................................................................. 12
Reinstalling the Trays............................................................................................................................................. 13
Installing the Cable Spools and the Tie Wraps......................................................................................................14
Installing Other Components.................................................................................................................................. 16
Installing Additional Mounting Rails.........................................................................................................................17
Turning on the Power with 72A PDUs......................................................................................................................19
Regulatory Compliance Statements..........................................................................................................................20
Copyright information.................................................................................................................................................22
Trademark information................................................................................................................................................23
How to send your comments.....................................................................................................................................24

ii - Table of Contents

3040 40U Cabinet Guide - 1
Specifications of the Model 3040 40U Cabinet
To access this product, go to the NetApp Support Site at support.netapp.com.
The Model 3040 40U cabinet has these standard features:
A rear door that can be latched and locked
Standard Electronic Industry Association (EIA) support rails that provide mounting holes for installing devices into
a standard 48.3-cm (19-in.) wide cabinet
Four roller casters and four adjustable leveling feet that are located beneath the cabinet for moving the cabinet
and then leveling the cabinet in its final location
A stability foot that stabilizes the cabinet after it is installed in its permanent location
Access openings for interface cables
Two AC power distribution units (PDUs) that provide integrated power connection and power handling capacity for
the controller-drive trays and the drive trays
WARNING (W05) Risk of bodily injury – If the bottom half of the cabinet is empty, do not install components
in the top half of the cabinet. If the top half of the cabinet is too heavy for the bottom half, the cabinet might fall and
cause bodily injury. Always install a component in the lowest available position in the cabinet.
WARNING (W07) Risk of bodily injury – Only move a populated cabinet with a forklift or adequate help from
other persons. Always push the cabinet from the front to prevent it from falling over. A fully populated cabinet can
weigh more than 909 kg (2000 lb). The cabinet is difficult to move, even on a flat surface. If you must move the
cabinet along an inclined surface, remove the components from the top half of the cabinet, and make sure that you
have adequate help.

2 - 3040 40U Cabinet Guide
Figure 1. Components of the Model 3040 40U Cabinet – Front View and Rear View
1. Ventilation Cover
2. Interface Cable Access Openings
3. Rear Plate
4. EIA Support Rails
5. Vertical Support Rails
6. Cabinet Mounting Rails
7. Stability Foot
8. Adjustable Leveling Feet
9. Power Strip
10. AC Power Entry Box
11. Front of the Cabinet
12. Rear of the Cabinet
You can configure the cabinet to meet your data storage needs. Standard cabinet configurations consist of a
combination of these types of trays:
Controller tray – Contains one or two controllers, one interconnect-battery canister, and two power-fan canisters.
Controller-drive tray – Contains drives, redundant cooling fans and power supplies, and, depending on the
model, one or two controllers.

3040 40U Cabinet Guide - 3
Drive tray – Contains drives, redundant cooling fans and power supplies, and one or two environmental services
modules (ESMs).
Power Requirements and Heat Dissipation
Maximum Number of Drive Trays
Power Requirements and Heat Dissipation
Power in the 3040 40U cabinet is provided by a power distribution unit (PDU) that consists of these components:
AC power entry boxes
Power strip
The 3040 40U cabinet is rated at 200 VAC to 240 VAC at 50 Hz to 60 Hz, and it operates to ±10 percent of that
range. The cabinet power strip provides a maximum of 72A of usable power. Power is provided to equipment in the
cabinet by 24 ICE320 power outlets on the power strip. The outlets are grouped into six independent banks with four
outlets per bank. The outlets are mounted at 2U intervals. Each outlet bank is rated at a maximum of 12A, and each
power outlet is rated at a maximum of 10A. A 15A circuit breaker protects each of the six banks of outlets. The circuit
breakers for the banks of outlets are located on the power strip.
The 3040 40U cabinet has three power entry boxes located at the bottom of the cabinet. Each power entry box
provides power to eight of the power outlets. Power entry box 1, which has power cord C1, supplies power to the
bottom eight outlets; power entry box 2, which has power cord C2, supplies power to the middle eight outlets; power
entry box 3, which has power cord C3, supplies power to the top eight outlets. The power entry boxes are labeled C1,
C2, and C3 where the power cords connect to the modules.
Table 1. Power Calculations and Heat Calculations for the Cabinet
Component kVA Watts Btu/Hr
Cabinet PDU (72A PDUs) 14.4 14400 49176
Cabinet PDU/12A bank (72A PDUs) 2.40* 2400* 8196*
E2612 controller-drive tray 0.400 399 1366
E2624 controller-drive tray 0.331 330 1127
E2660 controller-drive tray 1.268 1222 4180
E2712 controller-drive tray 0.400 399 1366
E2724 controller-drive tray 0.331 330 1127
E2760 controller-drive tray 1.268 1222 4180
E5412 controller-drive tray 0.589 589 2016
E5424 controller-drive tray 0.567 567 1935
E5460 controller-drive tray 1.246 1204 4119
E5512 controller-drive tray (200 VAC typical) .668 662 2262
E5512 controller-drive tray (200 VAC maximum) .674 670 2293
E5524 controller-drive tray (200 VAC typical) .495 483 1653
E5524 controller-drive tray (200 VAC maximum) .561 554 1896
E5560 controller-drive tray (200 VAC typical) 1.146 1097 3751
E5560 controller-drive tray (200 VAC maximum) 1.191 1179 4032

4 - 3040 40U Cabinet Guide
Component kVA Watts Btu/Hr
DE1600 drive tray 0.276 276 945
DE5600 drive tray 0.241 240. 821
DE6600 drive tray 1.268 1222 4180
* The maximum ratings at 200 VAC. The Btu calculation is based on the maximum current rating that the
power distribution unit can provide.
Maximum Number of Drive Trays
This section lists the maximum number of drive trays that you can install in a 3040 40U cabinet. The maximum
number of drive trays that you can install depends on the model of controller-drive tray to which you are attaching a
drive tray. The tables list the maximum number for these drive trays:
DE1600 drive tray (12-drive tray)
DE5600 drive tray (24-drive tray)
DE6600 drive tray (60-drive tray)
NOTE A 3040 40U cabinet can physically hold a maximum of twenty 12-drive trays. Of these trays, a maximum of 10
can be controller-drive trays. The remaining 10 trays can be DE1600 drive trays.
Table 2. DE1600 Drive Trays That Can Be Installed in the Cabinet
Maximum Number
of Controller-Drive
Trays
Controller-Drive Tray Maximum Number of
DE1600 Drive Trays
1 E2612 controller-drive tray (simplex) 1
1 E2624 controller-drive tray (simplex) 1
1 E2660 controller-drive tray (simplex) 1
2 E2612 controller-drive tray (duplex configuration) 7
1 E2624 controller-drive tray (duplex configuration) 6
1 E2660 controller-drive tray (duplex configuration) 6
1 E2712 controller-drive tray (simplex) 1
1 E2724 controller-drive tray (simplex) 1
1 E2760 controller-drive tray (simplex) 1
2 E2712 controller-drive tray (duplex configuration) 7
1 E2724 controller-drive tray (duplex configuration) 6
1 E2760 controller-drive tray (duplex configuration) 6
1 E5412 controller-drive tray 15
1 E5424 controller-drive tray 15
1 E5460 controller-drive tray 15
1 E5512 controller-drive tray 15
1 E5524 controller-drive tray 15
1 E5560 controller-drive tray 15

3040 40U Cabinet Guide - 5
NOTE A 3040 40U cabinet can physically hold a maximum of twenty 24-drive trays. Of these trays, a maximum of 10
can be controller-drive trays. The remaining 10 trays can be DE5600 drive trays.
Table 3. DE5600 Drive Trays That Can Be Installed in the Cabinet
Maximum Number of
Controller-Drive Trays Controller-Drive Tray Maximum Number of DE5600 Drive Trays
1 E2612 controller-drive tray (simplex configuration) 1
1 E2624 controller-drive tray (simplex configuration) 1
1 E2660 controller-drive tray (simplex configuration) 1
2 E2612 controller-drive tray (duplex configuration) 4
1 E2624 controller-drive tray (duplex configuration) 3
1 E2660 controller-drive tray (duplex configuration) 3
1 E2712 controller-drive tray (simplex) 1
1 E2724 controller-drive tray (simplex) 1
1 E2760 controller-drive tray (simplex) 1
2 E2712 controller-drive tray (duplex configuration) 4
1 E2724 controller-drive tray (duplex configuration) 3
1 E2760 controller-drive tray (duplex configuration) 3
1 E5412 controller-drive tray 7 with InfiniBand host
connections
13 without InfiniBand host
connections
1 E5424 controller-drive tray 9 with InfiniBand host
connections
15 without InfiniBand host
connections
1 E5460 controller-drive tray 7 with InfiniBand host
connections
13 without InfiniBand host
connections
1 E5512 controller-drive tray 7 with InfiniBand host
connections
13 without InfiniBand host
connections
1 E5524 controller-drive tray 9 with InfiniBand host
connections
15 without InfiniBand host
connections
1 E5560 controller-drive tray 7 with InfiniBand host
connections
13 without InfiniBand host
connections
NOTE A 3040 40U Cabinet can physically hold a maximum of ten 60-drive trays. Of these trays, a maximum of five
can be controller-drive trays. The remaining five trays can be DE6600 drive trays.

6 - 3040 40U Cabinet Guide
Table 4. DE6600 Drive Trays That Can Be Installed in the Cabinet
Maximum Number of Controller Trays Controller-Drive Tray Maximum Number of
DE6600 Drive Trays
1 E5412 controller-drive tray 3 with InfiniBand host
connections
6 without InfiniBand host
connections
1 E5424 controller-drive tray 3 with InfiniBand host
connections
6 without InfiniBand host
connections
1 E5460 controller-drive tray 3 with InfiniBand host
connections
5 without InfiniBand host
connections
1 E2660 controller-drive tray 2 without InfiniBand host
connections
1 E5512 controller-drive tray 3 with InfiniBand host
connections
6 without InfiniBand host
connections
1 E5524 controller-drive tray 3 with InfiniBand host
connections
6 without InfiniBand host
connections
1 E5560 controller-drive tray 3 with InfiniBand host
connections
5 without InfiniBand host
connections
Table 5. Drive Tray Intermixing
Controller Trays Maximum Number of Drive
Tray Maximum Number of Drives
E2612 controller-drive tray, E2612
controller-drive tray, or E2612 controller-
drive tray
You cannot intermix DE1600 drive trays, with DE5600 drive
trays, or DE6600 drive trays
E2712 controller-drive tray, E2724
controller-drive tray, or E2760 controller-
drive tray
16 192
E5412 controller-drive tray, E5424
controller-drive tray, or E5460 controller-
drive tray
16 384
E5512 controller-drive tray, E5524
controller-drive tray, or E5560 controller-
drive tray
10 384

3040 40U Cabinet Guide - 7
Installing the Cabinet
Because the cabinet is a large and heavy piece of equipment, cabinet installation requires planning with attention to
detail during the installation process, which includes these steps:
1. Gather the tools and equipment required for the installation.
2. Prepare the cabinet for moving.
3. Move the cabinet to its permanent location.
4. Complete the installation.
Gathering the Required Tools and Equipment
Preparing to Move the Cabinet
Moving the Cabinet
Gathering the Required Tools and Equipment
Table 6. Required for Cabinet Installation
Item Included with
the Cabinet
3/4-in. wrench (supplied in the shipping crate) – To raise and lower
the leveling glides under the cabinet.
1/4-in. Allen wrench – To raise and lower the stability foot in the
front of the cabinet.
AC power cords – To connect the cabinet to external power
sources (wall plugs).
SAS cables (optional) – Two cables are included with each drive
tray, while host side cables must be purchased separately.
Communication cables (optional) – To attach the tray to the host.
Refer to the initial setup guide for your controller tray, controller-
drive tray, or drive tray for additional required items.

8 - 3040 40U Cabinet Guide
Item Included with
the Cabinet
Mountable cable spools – Installed along both sides of the vertical
power distribution outlets to accommodate excess cable length and
cable routing. Two cable spools are included with each controller-
drive tray. Cable spools are also shipped with standalone drive
trays.
Shears – To cut the metal bands on the shipping crate.
Forklift (optional) – To remove the cabinet from the shipping pallet.
Front panel kits (optional) – To cover the empty bays at the front of
the cabinet.
Antistatic bags (optional) – To protect components that are
removed during the installation procedure for the cabinet.
Preparing to Move the Cabinet
Before you move the cabinet from its location in your receiving area, you must complete these tasks:
1. Estimate the total weight of the cabinet and the trays that are to be installed in it.
2. Acclimate the cabinet.
3. Remove the packing materials.
4. Check the shipping contents.
5. Remove selected components from the cabinet.
Estimating the Cabinet Weight
Acclimating the Cabinet
Removing the Packing Material
Checking the Shipping Contents
Removing the Components
Estimating the Cabinet Weight
The cabinet reliably and safely transports up to 909.1 kg (2000 lb) of capacity. You need to know the approximate
weight of the cabinet so that you can safely move it.
ATTENTION Possible equipment damage – Cabinets with DE6600 drive trays ship without drives to reduce
shipping weight. Because a fully-populated cabinet with DE6600 drive trays can weigh more than 909.1 kg (2000
lb), make sure that you move the cabinet into place before you load the drives, and make sure that the floor load
capability of the cabinet’s destination supports that much weight.
ATTENTION Possible damage to tray components – Do not place a DE6600 drive tray on a flat surface. Install the
DE6600 drive tray in the cabinet before operating or moving drawers.

3040 40U Cabinet Guide - 9
The total weight of the cabinet depends on the number and type of trays that are installed in the cabinet. Cabinet,
Tray, and Crate Weights lists the weights of the components that might be installed in the cabinet and the weight of
the empty cabinet. Use this table to calculate the approximate total weight of your cabinet. Make sure that you have
adequate personnel and equipment to safely move the cabinet.
NOTE For more detailed descriptions of the controller-drive trays and drive trays listed below, refer to the Storage
System Site Preparation Guide or the initial setup guide for each component.
Table 7. Cabinet, Tray, and Crate Weights
Component Weight Notes
Cabinet 138.80 kg (306.0 lb) Empty with the rear door installed
Power distribution units (PDUs [pair]) 19.96 kg (44.0 lb)
Mounting rails (pair) 1.59 kg (3.50 lb)
E2612 controller-drive tray 27 kg (59.52 lb) Maximum configuration
E2624 controller-drive tray 26 kg (57.32 lb) Maximum configuration
E2660 controller-drive tray 105.2 kg (232 lb) Maximum configuration
E2712 controller-drive tray 27 kg (59.52 lb) Maximum configuration
E2724 controller-drive tray 26 kg (57.32 lb) Maximum configuration
E2760 controller-drive tray 105.2 kg (232 lb) Maximum configuration
E5412 controller-drive tray 27.92 (61.52 lb) Maximum configuration
E5424 controller-drive tray 26.92 kg (59.32 lb) Maximum configuration
E5460 controller-drive tray 105.2 kg (232 lb) Maximum configuration
E5512 controller-drive tray 27.76 kg (61.22 lb) Maximum configuration
E5524 controller-drive tray 26.76 kg (59.02 lb) Maximum configuration
E5560 controller-drive tray 105.2 kg (232 lb) Maximum configuration
DE1600 drive tray 27 kg (59.5 lb) Maximum configuration
DE5600 drive tray 26 kg (57.3 lb) Maximum configuration
DE6600 drive tray 104.1 kg (229.6 lb) Maximum configuration
Shipping crate (for worldwide
shipments only)
136.08 kg (300 lb) Empty
Acclimating the Cabinet
ATTENTION Possible damage to tray components – If the outdoor temperature is below 0°C (32°F) when you
receive your cabinet and trays, do not immediately unpack them or uncrate them. Exposing cold components to warm
indoor temperatures can cause condensation, which results in component damage or failures.
Make sure that the cabinet and the trays are acclimated to the indoor environment before removing the packing
materials. If the outdoor temperature is below 0°C (32°F), leave the cabinet and trays inside of their crates indoors
for at least 24 hours to prevent condensation. Increase or decrease the 24-hour stabilization period depending on the
outside temperature upon arrival. After the cabinet and the trays have acclimated to the indoor environment, you can
unpack them.

10 - 3040 40U Cabinet Guide
Removing the Packing Material
After the cabinet has acclimated to the indoor temperature, refer to the unpacking instructions included on the front of
the shipping crate, and remove the packing material.
Checking the Shipping Contents
Compare the packing list against the equipment that you received to make sure that all equipment arrived at the site.
If any items are missing, contact your sales representative.
Removing the Components
Before you move the cabinet, remove some of the heavier components that are located in the top of the cabinet.
Removing these components makes sure of maximum stability and keeps the center of gravity as close to the floor as
possible while the cabinet is being moved.
After the cabinet is moved to its permanent location, you will reinstall these components in the cabinet in their original
locations. Make sure that you note the location of each component before you to remove it.
Refer to the initial setup guide for each tray, as required, to identify the components and switch locations. Refer to the
Hardware Cabling Guide, as required, for common cabling configurations.
ATTENTION Possible address conflict of loss of data access – To prevent address conflicts and loss of data
access, note the location of each tray, component, and cable prior to its removal so that you can reinstall each item in
its original location.
Complete these steps to remove the components:
1. Record the cable configuration for future reassembly if any cables must be disconnected.
2. Remove the drive trays and controller-drive trays in the top half of the cabinet. Keep all of the components from
the same tray together.
NOTE You do not need to remove the power supplies or other components from the rear of each tray.
3. Place each component in a separate antistatic bag. If the original shipping boxes are available, use them to
transport the components.
Moving the Cabinet
The 3040 40U cabinet has heavy-duty casters that enable you to move the cabinet to its permanent location.
Shipping crates provide built-in ramps and instructions for rolling the cabinet off the pallet without the use of a forklift.
Refer to the unpacking instructions included on the front of the shipping crate.
When you move a cabinet, you must be aware of all of the ramps between the loading dock and the destination. You
must evaluate all ramps to make sure that the cabinet’s center of gravity (when the cabinet is on a ramp and sitting at
an angle) does not extend beyond the cabinet’s footprint.

3040 40U Cabinet Guide - 11
Remove the top-most devices in your cabinet to make sure that the cabinet is safely transported to its final location.
This is especially important if any ramp has an incline or a decline greater than 10 degrees.
NOTE Many of the cabinets are populated with drive trays. This situation results in most of the weight in the front
portion of the cabinet, making the center of gravity closer to the front.
Move the cabinet to its permanent location using the correct method shown in the following figure. Make sure that you
push on the front of the cabinet, not the rear.
Figure 2. Incorrect Method and Correct Method for Moving the Cabinet

12 - 3040 40U Cabinet Guide
Completing the Installation
Four steps complete the installation procedure:
1. Lower the leveling glides and the stability foot.
2. Reinstall the trays, components, and cables.
3. Install the cable spools and tie wraps.
4. Install the other components.
Lowering the Leveling Glides and the Stability Foot
Reinstalling the Trays
Installing the Cable Spools and the Tie Wraps
Installing Other Components
Lowering the Leveling Glides and the Stability Foot
After you move the 3040 40U cabinet to its permanent location, lower the leveling glides to support the cabinet off of
the casters. Make sure that the cabinet is a level as possible. The leveling glides are located near each bottom corner
of the cabinet.
The stability foot prevents the cabinet from falling over after it is placed in its permanent location. Lower the stability
foot when the cabinet is in its permanent location. The following figure provides a close-up view of the stability foot
and the leveling guides.

3040 40U Cabinet Guide - 13
Figure 3. Stability Foot
Reinstalling the Trays
Complete these steps to reinstall the items that were removed prior to moving the cabinet.
ATTENTION Possible equipment damage – Do not install a DE6600 drive tray, an E2660 controller-drive tray, an
E2760 controller-drive tray, an E5460 controller-drive tray, or an E5560 controller-drive tray in the top of the cabinet
over your head. When fully-populated, each of these trays weighs over 100 kg (220 lb). If installed in the top of the
cabinet, the trays will create a top-heavy cabinet that can become easily unbalanced.

14 - 3040 40U Cabinet Guide
WARNING (W15) Risk of bodily injury – An empty tray weighs approximately 56.7 kg (125 lb). Three persons
are required to safely move an empty tray. If the tray is populated with components, a mechanized lift is required to
safely move the tray.
ATTENTION Possible address conflict or loss of data access – To prevent address conflicts and loss of data
access, replace all components in the same tray and in the same location in the tray. Reinstall all trays in their original
locations in the cabinet. Reinstall all cables in their original locations in the cabinet.
1. Reinstall all of the trays in their original locations in the cabinet.
2. Reinstall all of the components in their original locations in the trays.
3. Reinstall all cables to their original locations in the trays.
4. Route the interface cables to the cabinet.
5. Route the main power cords from the cabinet to the two external power sources. Do not plug in the power cords at
this time.
Installing the Cable Spools and the Tie Wraps
Install the cable spools and the tie wraps along both sides of the vertical power distribution outlets. The cable spools
and the tie wraps accommodate excess cable length and cable routing for the controllers and the trays.
The cable spools are shipped with the controller-drive trays.

3040 40U Cabinet Guide - 15
Figure 4. Tie Wrap Locations and a Cable Spool
1. Tie Wrap Location
2. Cable Spool

16 - 3040 40U Cabinet Guide
Installing Other Components
1. If you have additional trays that must be installed, install the mounting hardware for these trays. See “Installing the
Cable Spools and the Tie Wraps” on page 4.
2. If the front of the cabinet is not completely filled with trays, use front panel kits to cover the empty spaces above or
below the installed trays. Covering the empty spaces is necessary so that the correct airflow through the cabinet is
maintained.
3. Refer to the controller-drive tray installation guides for the trays that are contained in the cabinet, and complete the
power-on procedures described in the guides.