NetComm NB704 User manual

Features
High Speed Symmetrical Data Transmission on two Twisted Pairs of Copper Wires
Symmetrical Multi-rate Data Transmissions from 144 Kbps up to 4.6 Mbps
Supports PPPoE (RFC2516), PPP (RFC2364), and IP (RFC 2225/RFC1577) over ATM over SHDSL RFC2684 (RFC1483)
Bridged/Routed for both LLC/VC MUX
Operates in Bridge or Router modes.
Allows multiple LAN users to access Internet through Network Address Translation (NAT, IP sharing) simultaneously
Configuration and management by local Telnet, SNMP, and WEB Browser through the Ethernet interface, and remotely through
SHDSL interface
Built-in DHCP server
Firmware upgradeable through TFTP
Ethernet switch with four 10/100Mbps auto-sensing ports for PC or LAN connection
Supports up to 8 PVC's
ITU standard PAM16 Line Code, complies with G.991.2 and G.994.1 standards
Local OAM&P through command line interface via RS-232 Craft port
NETCOMM LIMITED ABN 85 002 490 486 • 2-6 Orion Road, LANE COVE, NSW, 2066 • phone [phone] • fax [phone] • email [email protected]
www.netcomm.com.au
Today’s Enterprise and SME businesses are constantly battling the unrelenting pressure to do more in less
time. Designed for applications that require high speed Internet or WAN links, such as Voice over IP, Video
Confrencing or Data hosting, the NB704 uses the next generation of SHDSL technology to deliver scalable
bandwidth, beyond the coverage area traditionally serviced by DSL or 2-wire SHDSL services.
The NB704 utilises existing telecommunications infrastructure (two twisted pairs of copper wire, 4-wire) to
enable high-speed symmetrical services with data transfer rates of up to 4.6Mbps (up and downstream), which
translates to higher throughput and productivity.
High Speed Symmetrical Internet Modem/Router
to service your business needs.
Up to 4.6Mbps
Symmetrical data
rates.
NAT Security
Bridge or Router
modes.
4-Wire Modem Router

NETCOMM LIMITED ABN 85 002 490 486 • 2-6 Orion Road, LANE COVE, NSW, 2066 • phone [phone] • fax [phone] • email [email protected]
www.netcomm.com.au
3 YEAR WARRANTY*
1 year warranty out of the box.
Extra 2 years FREE with online
registration at www.netcomm.com.au
*Conditional upon registration online.
Package Contents
NetComm 4 wire SHDSL Modem Router
Ethernet Cable
2 X RJ-11 Cables
AC Adapter
User Guide on CD ROM
Package Contents Note
NetComm is Australia’s dynamic data
communications and networking solutions
provider. For more information on this and
other NetComm products, please visit
www.netcomm.com.au
Trademarks and registered trademarks are the
property of NetComm Limited or their
respective owners. Specifications are subject
to change without notice.Images shown may
vary slightly from the product.
Your NetComm Dealer:
into SHDSL
Enabled Lines
Powerpoint
Telephone Line
Cables into WAN
Ports and
Power Adaptor
into POWER Port
Management
Terminal
Computer or
LAN
Specifications
Hardware
Local Interface
Four 10/100BaseTX Ethernet switch, IEEE
802.3u, RJ-45 connectors
10 Half, 10Full, 100Half, 100Full, Auto
Negotiation configurable for each port
Supports port based VLAN
WAN
Double SHDSL Line Interface
Data Rate: 144 Kbps up to 4.6Mbps rate
adaptive
Line Code: PAM16
Line Impedance: 135 Ohms
Connection Loops:Two Pairs (4 wire)
Connector: RJ-11
Indicators
PWR – Green LED, indicates power and
operation
ACT – Green LED, indicates LAN data
Transmitting / Receiving
LINK – Green LED, indicates LAN data link
status
WAN – Green LED, indicates SHDSL data
link status
ALM – Red LED, indicates data error and
operation fault
Management
Local: RS-232 Serial Port or Telnet, Web
browser via Ethernet
Remote: SNMP,Telnet, or Web browser
Environment
Operation Temperature: 0˚C ~ 45˚C
Operation Humidity: 5% ~ 95%
Storage Temperature: -20 ~ +85˚C
Storage Humidity: 5%~95%
Physical Dimensions
(W x D x H) 220mm x 169mm x 40mm
Power
AC Adapter :Input 240 Volts AC/50Hz;
Output 12VDC 1A
Power Consumption: Less than 10 Watts
Certificates
EMC: CE, FCC Part 15 class B, CB, A-Tick
Specifications
Software
ATM
ATM Cell over SHDSL, AAL5
Support UBR & CBR, VBR-nrt & VBR-rt
VPI Range (0-4095) and VCI range (1-
65535)
Supports up to 8 PVCs for Bridge and 5
PVCs for Router
Supports OAM F4/F5 loopback
Payload Encapsulation --
RFC2684 (RFC1483), multi-protocol
over ATM
RFC2225 (RFC1577), IPoA
RFC2364, PPP over ATM (CHAP and
PAP supported)
RFC2516, PPPoE (PPP over Ethernet)
over ATM
Bridging
Transparent Bridging (IEEE 802.1D)
RFC2684 (RFC1483) Bridged
Spanning Tree Protocol (IEEE 802.1D)
Supporting IP, IGMP, and PPPoE packets
filter function
Port based VLAN
Routing
TCP/IP with RIP1,RIP2, or static IP routing
NAT/PAT – RFC1631 (basic Firewall
support)
RFC2684 (RFC1483) Routed
DNS Relay
Other
DHCP server for IP management
TFTP for firmware upgrade and
configuration
Easy to connect with
step by step installation
instructions.
4-Wire Modem Router