NetComm NB604 User manual

NB604 ADSL2+ Modem Router
USER GUIDE

2
NetComm NB604 –ADSL2+ Modem Router
YML604X
www.netcommwireless.com
Copyright
Copyright©2012 NetComm Limited. All rights reserved.
The information contained herein is proprietary to NetComm Limited. No part of this document may be translated, transcribed,
reproduced, in any form, or by any means without prior written consent of NetComm Limited.
Please note: This document is subject to change without notice.
Save Our Environment
When this equipment has reached the end of its useful life, it must be taken to a recycling centre and processed separately from
domestic waste.
The cardboard box, the plastic contained in the packaging, and the parts that make up this device can be recycled in accordance
with regionally established regulations. Never dispose of this electronic equipment along with your household waste. You may be
subject to penalties or sanctions under the law. Instead, ask for disposal instructions from your municipal government.
Please be responsible and protect our environment.
This manual covers the following products:
NetComm Wireless NB604
DOCUMENT VERSION
DATE
1.0 - Initial document release
04/04/2012
1.1 - Revision
05/11/2012

www.netcommwireless.com
3
NetComm NB604 –ADSL2+ Modem Router
YML604X
Table of Contents
Overview ........................................................................................................................................................................................4
Introduction...................................................................................................................................................................................................4
Target Users..................................................................................................................................................................................................4
Prerequisites..................................................................................................................................................................................................4
Notation ........................................................................................................................................................................................................4
Product Introduction .....................................................................................................................................................................5
Product Overview ..........................................................................................................................................................................................5
Package Contents .........................................................................................................................................................................................5
Product Features...........................................................................................................................................................................................5
Physical Dimensions and Indicators............................................................................................................................................6
LED Indicators...............................................................................................................................................................................................6
Physical Dimensions ......................................................................................................................................................................................7
NB604 Default Settings..................................................................................................................................................................................7
Integrated Interfaces .....................................................................................................................................................................8
Safety and Product Care ...............................................................................................................................................................9
Transport and Handling.................................................................................................................................................................9
Hardware installation....................................................................................................................................................................................10
Connecting via a cable................................................................................................................................................................................. 10
Management Console Login Procedure .....................................................................................................................................11
Management Console Menus .....................................................................................................................................................11
Device Info ..................................................................................................................................................................................................12
Basic Setup.................................................................................................................................................................................................17
Advanced Setup..........................................................................................................................................................................................17
Diagnostics .................................................................................................................................................................................................42
Management ...............................................................................................................................................................................................43
Technical Data .............................................................................................................................................................................47
Electrical Specifications................................................................................................................................................................................47
Environmental Specifications / Tolerances ....................................................................................................................................................47
FAQ ..............................................................................................................................................................................................48
Legal & Regulatory Information...................................................................................................................................................49
Contact.........................................................................................................................................................................................51

4
NetComm NB604 –ADSL2+ Modem Router
YML604X
www.netcommwireless.com
Overview
Introduction
This manual provides information related to the installation, operation, and utilisation of the NB604.
Target Users
The individual reading this manual is presumed to have a basic understanding of telecommunications terminology and concepts.
Prerequisites
Before continuing with the installation of your NB604, please confirm that you comply with the minimum system requirements
below.
An activated ADSL/ADSL2/ADSL2+ broadband service.
Computer with Windows, Macintosh, or Linux-based operating systems with a working Ethernet adapter with TCP/IP
Protocol installed.
A Web Browser such as Internet Explorer, Mozilla Firefox, Google Chrome, Safari etc.
Notation
The following symbols are utilised in this user manual:
The following note requires attention
The following note provides a warning
The following note provides relevant information

www.netcommwireless.com
5
NetComm NB604 –ADSL2+ Modem Router
YML604X
Product Introduction
Product Overview
Connects you to high-speed ADSL2+ broadband
Includes 4 Ethernet LAN ports for multiple wired connections
USB port to connect an external hard drive
IPv6 Support
Advanced security
Simple setup
Package Contents
The NB604 package consists of:
NetComm Wireless NB604 –ADSL2+ Modem Router
12VDC~1.5A Power Adapter
RJ-45 Ethernet Cable
RJ-11 Telephone Cable
Quick Setup Guide
Warranty Card
If any of these items are missing or damaged, please contact NetComm Support immediately by visiting the NetComm Support
website at: http://www.netcommwireless.com/contact-forms/support
Product Features
The NetComm NB604 ADSL2+ Modem Router allows you to connect to a broadband Internet service and share the connection
with multiple users and includes a host of other features to make your experience as seamless as possible.
The NB604 also comes with a built-in 4 port Ethernet switch, allowing for other devices to access the Internet over a wired
connection.
The NB604 also offers IPv6 support, the latest generation of Internet addressing meaning that the NB604 is future proofed against
the exhaustion of the IPv4 address space.
The NetComm NB604 ADSL2+ Modem Router has a number of handy features that assist in delivering you the best possible user
experience. These include advanced security options to ensure your network remains safe and an easy to navigate web interface if
you need to change any settings.

6
NetComm NB604 –ADSL2+ Modem Router
YML604X
www.netcommwireless.com
Physical Dimensions and
Indicators
LED Indicators
The NB604 has been designed to be placed on a desktop. All of the cables exit from the rear for better organization. The display is
visible on the front of the NB604 to provide you with information about network activity and the device status. See below for an
explanation of each of the indicator lights.
LED INDICATOR
ICON
COLOUR
DEFINITION
Power
Off
Router is not powered on
Red
Router is starting up
Green
Router is operating normally
DSL
Off
Router is not connected to an xDSL service
Green
Router is connected to an xDSL service
Flashing
Router is connecting to an xDSL service
Internet
Off
Router is not connected to the Internet
Red
Router is unable to connect to the internet with the current configuration details
Green
Router is connected to the internet
Flashing
Data is being transmitted or received via the Internet connection
LAN1-LAN4
Off
No device connected to the LAN port
Green
Device connected to the LAN port
Flashing
Data is being transmitted or received on the LAN port
Green
Wi-Fi function is enabled
Flashing
Data is being transmitted or received via the Wi-Fi network
Green
WPS function is enabled
Flashing
WPS function is attempting to connect to a device
USB
Off
No USB device is plugged in
Green
USB device plugged in
Flashing
Data is being transmitted or received from the attached USB device

www.netcommwireless.com
7
NetComm NB604 –ADSL2+ Modem Router
YML604X
Physical Dimensions
The following page lists the physical dimensions of the NB604.
NB604
Length
196 mm
Height
133 mm
Width
34 mm
Weight
315 grams
NB604 Default Settings
The following tables list the default settings for the NB604.
LAN (MANAGEMENT)
Static IP Address:
192.168.1.1
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.1.1
NB604 WEB INTERFACE ACCESS
Username:
admin
Password:
admin

8
NetComm NB604 –ADSL2+ Modem Router
YML604X
www.netcommwireless.com
Integrated Interfaces
The following integrated interfaces are available on the NB604:
INTERFACE
FUNCTION
DSL
Attach a telephone line with an active xDSL service here
RESET
Hold this button down for 10 seconds or more to reset the NB604 to factory defaults
LAN1-LAN4
Attach Ethernet based devices
USB
Attach an external USB storage device to share content with connected devices
Power (12V) Jack
Power connector, connects to a DC 12V 1.5A Power Adapter
Power Button
Turn the NB604 on or off

www.netcommwireless.com
9
NetComm NB604 –ADSL2+ Modem Router
YML604X
Safety and Product Care
With reference to unpacking, installation, use and maintenance of your electronic device, the following basic guidelines are
recommended:
Do not use or install this product near water to avoid fire or shock hazard. For example, near a bathtub, kitchen sink,
laundry tub, or near a swimming pool. Also, do not expose the equipment to rain or damp areas (e.g. a wet basement).
Do not connect the power supply cord on elevated surfaces. Allow it to lie freely. There should be no obstructions in its
path and no heavy items should be placed on the cord. In addition, do not walk on, step on or mistreat the cord.
To safeguard the equipment against overheating, make sure that all openings in the unit that offer exposure to air are
unobstructed.
WARNING
Disconnect the power line from the device before servicing.
Transport and Handling
When transporting the NB604, it is recommended to return the product in the original packaging. This ensures the product will not
be damaged.
In the event the product needs to be returned, ensure it is securely packaged with appropriate padding to prevent
damage during courier transport.

10
NetComm NB604 –ADSL2+ Modem Router
YML604X
www.netcommwireless.com
Hardware installation
1. Connect the power adapter to the Power socket on the back of the NB604.
2. Plug the power adapter into the wall socket and switch on the power.
3. Wait approximately 60 seconds for the NB604 to power up.
Connecting via a cable
1. Connect the yellow Ethernet cable provided to one of the ports marked ‘LAN’at the back of the NB604.
2. Connect the other end of the yellow Ethernet cable to your computer.
3. Wait approximately 30 seconds for the connection to establish.
4. Open your Web browser, and enter http://192.168.1.1 into the address bar and press enter.
5. Follow the steps to set up your NB604.

www.netcommwireless.com
11
NetComm NB604 –ADSL2+ Modem Router
YML604X
Management Console Login
Procedure
To log in to the management console and view the status or make changes to your NB604 configuration, please follow the steps
below:
1. Open your web browser (e.g. Internet Explorer/Firefox/Safari) and navigate to http://192.168.1.1
2. Enter the default username and password of “admin” (without the quotes) and click “OK”.
Management Console Menus
The Management Console offers the following menu items:
Device Info
Basic Setup
Advanced Setup
Diagnostics
Management
These functions vary from viewing statistics and information about your NB604 to changing its configuration. Click on a menu item
to access the respective page.

12
NetComm NB604 –ADSL2+ Modem Router
YML604X
www.netcommwireless.com
Device Info
The device info menu provides information and statistics about the NB604 and the currently configured network connections and
hosts.
Summary
The summary page provides an overview of the current operating parameters used by your NB604. You can use this check your
firmware version or network connection information, such as your current Internet IP address or Internet connection speed as
shown below.

www.netcommwireless.com
13
NetComm NB604 –ADSL2+ Modem Router
YML604X
WAN
The WAN page displays a summary of the WAN connection settings and your WAN IP address (if applicable).
Statistics
Statistical information is provided and displayed broken down by network connection and type of connection. Please see the
following pages for an explanation of each these items.

14
NetComm NB604 –ADSL2+ Modem Router
YML604X
www.netcommwireless.com
LAN
The LAN page displays information about computers or devices connected to the NB604 either by an Ethernet cable.
WAN Service
The WAN page displays information about the WAN connection in use by the NB604. An entry will be shown for each configured
connection.

www.netcommwireless.com
15
NetComm NB604 –ADSL2+ Modem Router
YML604X
xTM
The Asynchronous Transfer Mode (ATM) page shows information about the currently configured ATM interface.
xDSL
The xDSL page shows information about the currently configured xDSL connection and connection conditions.

16
NetComm NB604 –ADSL2+ Modem Router
YML604X
www.netcommwireless.com
Route
The Route page lists the current routing table entries.
ARP
The Address Resolution Protocol (ARP)page shows the current ARP table entries.
DHCP
The DHCP page lists the current DHCP leases in use on the NB604.

www.netcommwireless.com
17
NetComm NB604 –ADSL2+ Modem Router
YML604X
Basic Setup
Quick Setup
The Quick Setup page is used to quickly and easily configure your Internet connection.
1. Enter the username provided by your Internet Service Provider (ISP) in the PPP Username field.
2. Enter the password provided by your ISP in the PPP Password field.
3. Click Apply/Save.
4. Click “Next” and view your connection information. The NB604 will then automatically attempt to connect using the details
you entered.
Advanced Setup
The Advanced Setup page provides configuration options for other network and connection based functions of the NB604. Please
see the following pages for an explanation of these functions.

18
NetComm NB604 –ADSL2+ Modem Router
YML604X
www.netcommwireless.com
Layer 2 Interface
The Layer 2 Interface pages allow you to add or remove ATM interfaces and configure the behaviour of the Ethernet ports.
ATM Interface
To remove a currently configured ATM Interface, Click the remove checkbox corresponding to the chosen interface and click
Remove.
To Add a new Interface, click the add button and enter the appropriate configuration information as shown below:
PARAMETER
DEFINITION
VPI/VCI
Enter the PVC identifier for your service. This will usually be 8/35 for users in Australia.
DSL Latency
Select the DSL latency path you wish to use.
DSL Link Type
Select the type of connection –PPPoE (EoA), PPPoA or IPoA
Connection Mode
Select the type of connection
Encapsulation Mode
Select the type of encapsulation utilised by your service
QoS Settings
Select the appropriate Quality of Service settings to apply to this connection
Click Apply/Save to save the new Interface.

www.netcommwireless.com
19
NetComm NB604 –ADSL2+ Modem Router
YML604X
ETH Interface
To remove a currently configured ATM Interface, Click the remove checkbox corresponding to the chosen interface and click
Remove.
To Add a new Interface, click the add button and select the appropriate configuration options as shown below:
PARAMETER
DEFINITION
ETH Port
Select the Ethernet port to apply the configuration to.
Connection Mode
Select the connection mode.
(VLAN MUX is typically used to access services such as IPTV)
Click Apply/Save to save the new Interface.

20
NetComm NB604 –ADSL2+ Modem Router
YML604X
www.netcommwireless.com
WAN Service
This screen provides a summary of the current WAN interfaces you have configured. If you have connected the NB604 to an ADSL
connection through the ADSL Quick Setup interface, details of the connection will be summarized here. You can also add or
remove WAN Services.
To remove a currently configured WAN Service, Click the remove checkbox corresponding to the chosen service and click Remove.
To create a new WAN Service connection:
1. Click Add.
2. Select a currently unused ATM interface
3. Select the connection type and enter a description for the WAN Service.
4. Select to enable IPv6 support for the connection (if needed).
5. Enter the connection settings applicable for the connection type.