NETGEAR ProSafe GS108P User manual

ProSafe 8-Port 10/100/1000 Gigabit Switch
with 4-Port PoE GS108P
Installation Guide
Step 2. Connect power Step 3. Check status
Optional
modem
Step 1. Connect equipment
GS108P
Optional router
Computer Server
Internet
Off
On
Power LED Port LEDs
Activity (blinking)
No link (off)
1000 Mbps link
(both LEDs)
10 Mbps link
(right LED)
100 Mbps link
(left LED)
PoE LEDs
PoE in use
No PoE use (off)
PoE not provided
(slow blinking)
PoE halted
(fast blinking)
Less than 7W of
PoE power is
available
PoE Max. LED
PoE ports are working normally (off)
PoE MAX LED was
active in the previous
2 minutes (blinking)
GS108Pv1_IG_18Sept2012.fm Page 1 Friday, September 21, 2012 12:02 PM

September 2012
This symbol appears in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE directive). If you dispose of this product in the
European Union, treat and recycle it in accordance with your jurisdiction’s laws that implement the
WEEE directive.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to
change without notice. Other brand and product names are registered trademarks or trademarks of their
respective holders. © NETGEAR, Inc. All rights reserved.
For indoor use only in all EU countries and Switzerland.
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Statement of Conditions: In the interest of improving internal design, operational function, and/or reliability,
NETGEAR reserves the right to make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Specifications
Specification Description
Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T
Network cable Category 5e (Cat 5e) or better Ethernet cable
Ports 8
Power adapter 48V @ 1.25A DC input
Power consumption 60W
PoE power budget 50W max. (all PoE ports, Port 1 - Port 4),
15.4W max. per PoE port
Weight 0.716 Kg (1.7 lbs)
Dimensions
(W x D x H)
235 mm x 102 mm x 27 mm
9.3 in. x 4.1 in. x 1.1 in.
Operating
temperature
0–50° C (32–122° F)
Operating humidity 10%–90% relative humidity, noncondensing
Electromagnetic
compliance
CE Class B; FCC Class B; VCCI Class B,
C-Tick Class B, CCC
Safety agency
approvals
CE mark, CB, CCC
Technical Support
After installing your device, locate the serial number on the label of your product and
use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR web site.
For product updates and web support, visit http://support.netgear.com.
GS108Pv1_IG_18Sept2012.fm Page 2 Friday, September 21, 2012 12:02 PM