NETGEAR ProSAFE S3300-28X User manual

Installation
Package Contents
• NETGEARProSAFESmartSwitchS3300-28X,S3300-52X,S3300-
28X-PoE+,orS3300-52X-PoE+
• Rubberfootpadsfortabletopinstallation
• ACpowercord
• 19-inchrack-mountkitforrackinstallation
• ResourceCD
NETGEAR ProSAFE Smart Switch S3300
S3300-28X, S3300-52X, S3300-28X-PoE+,
S3300-52X-PoE+
Connect the Switch to Your Network
IfyouareusingstaticIPaddressesinyournetworkyoumustcongurethe
switchwithastaticIP.IfyouareusingDHCPserver,youcanskipthenext
section.
¾To configure the switch with a static IP address:
1. CongureyourcomputerwithastaticIPaddressinthe192.168.0.x
subnet.
2. ConnectyourcomputertoaportontheswitchusinganEthernetcable.
3. Inabrowser,enterthedefaultIPaddressofyourswitch,
192.168.0.239.
Aloginscreendisplays.
4. Enterpasswordforthepassword.
5. SelectSystem >Management >IP Configuration.
6. EnterthestaticIPaddressyouwanttoassigntheswitch.
7. ClicktheApplybutton.
¾To connect your switch to your network:
1. CableacomputertoanEthernetportontheswitchfrontpanel.
2. Powerontheswitch.
3. VerifythatthecomputerwiththeSmartControlCenterUtilityisonthe
samesubnetastheswitch.
Configure the Switch
UsetheSmartControlCenterUtilityincludedontheResourceCD++to
conguretheswitch.
¾To configure your switch:
1. Double-clicktheSmartControlCenterUtilityicononyourdesktop.
TheSmartControlCenterdisplays.
2. ClicktheDiscoverbutton.
TheSmartControlCenterUtilityndstheswitchanddisplaysitsMAC
address,IPaddress,andmodelnumber.
3. Clickthelinefortheswitchthatyouwanttocongure.

July2014
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
4. ClicktheWeb Browser Accessbutton.
Theloginscreendisplays.
5. Enterpasswordforthepassword.
6. ClicktheLoginbutton.
TheSystemInformationscreendisplays.
7. Conguretheswitchforyournetwork.
Formoreinformation,seethesowareadministrationguide.
Troubleshooting Tips
Followthesetroubleshootingtipstocorrectsimpleproblemsyoumight
have.
• Powerontheswitchbeforeconnectingthecomputer.
• MakesuretheEthernetcablesarepluggedin.Foreachpowered-on
computerconnectedtotheswitch,thecorrespondingswitchLANport
statusLEDislit.
• Makesurethenetworksettingsonthecomputerarecorrect.Inmost
cases,computersshouldbeconguredtoobtainanIPaddressthrough
DHCP.IfyournetworkusesstaticIPaddresses,besurethatthe
switchandcomputerareconguredwithvalidIPaddresses.Formore
information,seethesowareadministrationmanual.
Support
ThankyouforselectingNETGEARproducts.
Aerinstallingyourdevice,locatetheserialnumberonthelabelofyour
productanduseittoregisteryourproductathttps://my.netgear.com.
YoumustregisteryourproductbeforeyoucanuseNETGEARtelephone
support.NETGEARrecommendsregisteringyourproductthroughtheNETGEAR
website.Forproductupdatesandwebsupport,visit
http://support.netgear.com.
NETGEARrecommendsthatyouuseonlytheocialNETGEARsupport
resources.
ForthecurrentEUDeclarationofConformity,visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Forregulatorycomplianceinformation,visit
http://www.netgear.com/about/regulatory/.
Seetheregulatorycompliancedocumentbeforeconnectingthepowersupply.