NEUTRIK powerCON TRUE1 Product guide

Page 1BDA 380
power TRU 1CON E
|
R
ASSEMBLY INSTRUCTION
20
250
PS
E
JET
16
250
20
250
NAC3MX-W
Place chuck overthe
the cable.
Prepare cable asthe
shown.
D
B. ASSEMBLY INSTRUCTION
A. OPERATING INSTRUCTION
Application:
The power TRUE1 system is certified as connector with breaking cap ity according IECCON ac
60320, VDE It is intended for use as It0625. appliance couplers and interconnection couplers.
serves to supply power to appliance and from an appliance to another equipment.an To be installed by
qualified person only.
Connector Assignment:
NAC3PX
NAC3MPX NAC3FPX
NAC3FPX-ST
20
250
P S
E
JET
20
250
PS
E
JET
16
250
20
250
NAC3MX-W
20
250
PS
E
JET
16
250
20
250
NAC3MX-W
20
250
P S
E
JET
Power IN
Power OUT
Power IN
Power OUT
[0.32"]
8 mm
[”]0.787
2mm0
[”]0.9
PE 23 mm
NAC3MX-W
(Plug connector)
NAC3FX-W
(Connector)
NAC3FX-W
(Connector)
NAC3MX-W
(Plug connector)
Separate the
housing from the
bushing (cable
remain in bushing)
AB
Insert cable into the
bushing and housing.
Note: “Apply cable
pulling lubricant to
cable jacket.”
C
20
250
P S
E
JET
16
250
20
250
NAC3MX-W
Approval based:
Rating:
Cable Type:
Strain Relief:
Cable O.D.:
VDE
EN 60320-1/EN60320-2-2
250 V ac / 16 A
H05VV-F3G 1.0 mm , Length max. 2 m
2
H05VV-F3G 1.5 - 2.5 mm2
H07RN-F3G 1.5 mm2
White chuck
6.0 - 12.0 mm
UL
UL 498 / CSA C22.2 No. 182.3
250 V ac / 20 A
SJTOW, SJOOW 3 x 12 AWG
White chuck
6.0 - 12.0 mm
C
[0.32"]
8 mm
[”]0.787
2mm0
[”]0.9
PE 23 mm
VDE (EN 60320-1/EN60320-2-2) UL (UL 498 / CSA C22.2 No. 182.3)
40 - 50 mm
APPLIANCE INLET APPLIANCE OUTLET APPLIANCE INLET - OUTLET
COMBINATION
All manuals and user guides at all-guides.com
all-guides.com

Draft. Nr.: BDA Update:380 13.07.2016 Data subject to change without prior notice. 201 NEUTRIK . ALL RIGHTS RESERVED.5 NEUTRIK are registered trademark.
II ©® ®
NEUTRIK AG T: F:LI +423 / 237 24 24 [phone]/
NEUTRIK USA Inc. T: F:USA +1 704 / 972 3050 [phone]/
NEUTRIK UK Ltd.
() T: F:UK +44 1983 / 811 441 [phone]/
NEUTRIK Vertriebs GmbH T: F:DE/NL/AT/DK +49 8131 / 280 890 [phone]/
NEUTRIK France FR T: F:[phone] [phone]//
NEUTRIK Tokyo Ltd. JP T: F:[phone] [phone]//
NEUTRIK Hong Kong Ltd. T: F:HK [phone] [phone]//
NEUTRIK India Pvt. Ltd. IND T: F:+ [phone]/982 05 43 424 /
ASSEMBLY INSTRUCTION powerCON TRUE1
I
R
20
250
P S
E
JET
16
250
20
250
NAC3MX-W
20
250
P S
E
JET
16
250
20
250
NAC3MX-W
Torque Value 0.7 Nm
5.
Torque Value 2.0Nm
PRESS FIRMLY
Torx size
T8
1.
2.
4.
Wrench size
13 mm
6.
3.
Important:
Push and turn simultaneously.
FOR DISASSEMBLY - OPEN TWIST LOCK!
1. Press with screw driver to unlock
Turn bushing 360°.2.
Repat step 1 + 2 until bushing is unscrewed.3.
1.
2.
CAUTION
To ensure protection
category, do not expose the
connection to bending forces
(e.g. do not attach loads to
the cable, no free-dangling
cable windings etc.).
LIECHTENSTEIN
20
250
P S
E
JET
G
E
F
Important:
Align r keyubber
latch.and
Insert the wires into the terminals and fasten the
screw with Torx size T8.
Wiring VDE UL
blackLbrownÞ
whiteNblueÞ
green / yellow greenÞ
Slide the chuck onto the insert (1) and then both
together into housing (2).
Important: Align the chuck byand insert
positioning the nose into keyway.the
Slide the bushing up the cable tighten itand with
the tool as shown.
Important: Yellow O-ring to hide to achieve IP
protection (6).
(Tool available: Art. No. HTAC)
FORCE
SAFETY WARNING
For safety and certification reasons the connector must be
replaced in case of any broken parts or serious damage.
All manuals and user guides at all-guides.com