NEUTRIK NP2RX-ULTIMATE User manual

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION
NP2RX-ULTIMATE 1/4" Guitar - ultimatePLUG
|
R
BDA 386
Slide the boot onto the cable.
Prepare cable as shown.
Position the red cover next to the shell:
S older the SHIELD to the ground lug.
Solder the red cable (TIMBRE)
combined with the hot wire to the TIP
lug.
Sliding the screw (D) into the hole and
between the wires before ......
Position the cover on the shell (E) and fix
it with a screw driver (POZIDRIV #1) the
screw (F).
A
B
C
E
Page 1
D
ultimatePLUG
F
2.
Shield
Tip
TIMBRE
1.
1.
2.
Silent
Switch
®
4[ ]
0.16”
25 [ ]
0.98”
10 [ ]
0.39”
Shield
Tip
Cable O.D. 4.0 - 7.0 mm [0.16 - 0.27”]

Draft. Nr.: BDA 386 Update: 13.09.2016 Data subject to change without prior notice. 2016 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark.
I I ® ®
©
ASSEMBLY INSTRUCTION ultimatePLUG
I
G
ultimatePLUG
1.
2.
ultimatePLUG
1.
2.
H
ultimatePLUG
Position the chuck on to the cable and move
it into the housing.
Attention: Pay attention to the guiding key of
the chuck.
Finish the installation by tighten the bushing
onto the connector.
FINISH
Page 2
NEUTRIK AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
NEUTRIK USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
( )
NEUTRIK UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
NEUTRIK Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
NEUTRIK France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
NEUTRIK India Pvt. Ltd. IND T: +91 / 982 05 43 424 F: +91 / 22 26163 540
www.neutrik.com