New Holland 1037 User manual

New Holland
Bale Wagon Specifications
H9870 H9880 1037
Page 1 of 2
MODEL NUMBER H9870 H9880 1037
Type elf-propelled elf-propelled Pull-type
Average tons per load 654
Bale size Avg. bale weight, alfalfa Bales per load Bales per load Bales per load
14 x 18 x 36 55-60 lbs. 161 NA 104
14 x 18 x 38 60-75 lbs. 161 NA 104
14 x 18 x 41 70-75 lbs. 161 NA 104
15 x 22 x 46 90-130 lbs. NA 84 NA
15 x 23 x 46 115-135 lbs. NA 84 NA
16 x 18 x 36 70-75 lbs. 161 NA 83
16 x 18 x 38 75-80 lbs. 161 NA 83
16 x 18 x 41 85-90 lbs. 161 NA 83
16 x 18 x 46 95-100 lbs. NA 107 NA
16 x 23 x 46 125-145 lbs. NA 74 NA
16 x 22 x 46 120-140 lbs. NA 74 NA
Weight (empty), lbs. (kg) 16,130 (7316) 15,640 (7094) 5,410 (2454)
Length, ft. (cm) 31’ 3” (853) 31’ 3” (853) 25’ 6” (777)
Width, minimum ft. (cm) 9’ 11” (302) 9’ 4” (285) NA
Loader raised, max., ft. (cm) 11’ 4” (345) 10’ 7” (322) 10’ 2” (310)
Loader lowered, ft. (cm) 13’ 8” (417) 12’ 2” (371) 14’ 3” (433)
Height, ft. (cm) 14’ 8” (477) 14’ 8” (477) 11’ 11” (363)
Wheel tread width, ft. (cm)
Front 80-1/8” (204) 80-1/8” (204) NA
Rear 69-1/2” (177) 69-1/2” (177) 6’ (183)
Ground clearance, in. (cm) NA NA 13 (33)
Front axle 9-5/8” (24) 9-5/8” (24) NA
Transmission 13-1/8” (33) 13-1/8” (33) NA
Wheelbase, ft. (cm) 14’ 8” (447) 14’ 8” (447) NA
Overhead clearance (for stacking), ft. (cm)
16” x 18” bale 17’ 6” (533) 17’ 6” (533) 13’ (396)
14” x 18” bale 16’ 10” (513) 17’ 6” (533) 14’ (427)
15” x 22” bale 17’ 6” (533) 17’ 6” (533) NA
16” x 23” bale NA 17’ 6” (533) NA
Tires
Front 400/55-22.5 400/55-22.5 NA
Rear 500/45-22.5 40 x 19-19.5 11.00L x 15
Tractor power requirements, (min) NA NA 50 hp
Front disc brakes 15” (38) 15” (38) NA
Rear disc brakes 15-3/8” (39) 15-3/8” (39) NA
Engine 6.7L New Holland 6.7L New Holland NA
Horsepower, HP (kW) 173 (129) 173 (129) NA
Alternator 120 amp 120 amp NA
Fuel tank, gal. (L) 74 (280) 74 (280) NA

New Holland
Bale Wagon Specifications
H9870 H9880 1037
Page 2 of 2
MODEL NUMBER H9870 H9880 1037
Operating speeds, mph (kph)
Loading 10 (16) 10 (16) NA
Hauling (on approved grounds) 30 (48) 30 (48) NA
Hydraulic pumps Piston pump Piston pump 10.5 gpm (39.7 Lpm)
29 gpm (110 Lpm) 29 gpm (110 Lpm)
@ 2450 rpm (2050 psi) @ 2450 rpm (2050 psi)
Gear pump Gear pump
6.7 gpm (25 Lpm) 6.7 gpm (25 Lpm)
@ 2450 rpm @ 2450 rpm
Gear pump Gear pump
13.8 gpm (52 Lpm) 13.8 gpm (52 Lpm)
@ 2450 rpm @ 2450 rpm
Hydraulic valves Electro-hydraulic Electro-hydraulic Manual spool valve
Two manifold valve Two manifold valve
assemblies assemblies
Bale length, in. (cm)
Minimum 36 (91) 44 (118) 34 (86)
Maximum 41 (104) 48 (122) 42 (106)
tack size, in. (cm)
16 x 18, height 162 (411) 162 (411) 7 tiers
16 x 18, width 120 (305) 92 (234) 3 bales
14 x 18, height 162 (411) NA 7 tiers
14 x 18, width 114 (290) NA 3 bales
16 x 23, height NA 151 (384) NA
16 x 23, width NA 92 (234) NA
15 x 22, height NA 157 (399) NA
15 x 22, width NA 92 (234) NA
Automatic tie tier tandard tandard NA
Max. hillside angle NA NA 10°
OPTIONS
■Heater ■Heater ■Hillside hauling kit
■Weight box ■Weight box ■Tractor-mounted
■Wiper kit ■Wiper kit remote controls
■Radio ■Radio ■Tier counter
■Fan reverser ■Fan reverser
■First table flow control valve ■First table flow control valve
■Auxiliary mirror ■Auxiliary table flow control valve
■Rear worklight ■16 x 18 bale kit
■Brake pedal kit ■Auxiliary mirror
■Rear worklight
■Brake pedal kit
Safety begins with a th r ugh understanding f
the equipment. Always make sure y u and
y ur perat rs read the Operat r’s Manual
bef re using the equipment. Pay cl se
attenti n t all safety and perating
decals and never perate machinery
with ut all shields, pr tective devices
and structures in place.
Design, materials and/ r specificati ns are subject t
change with ut n tice and with ut liability theref r.
Specificati ns are applicable t units s ld in Canada, the
United States, its territ ries and p ssessi ns, and may
var y utside these areas.
© 2008 CNH America LLC
New H lland is a registered trademark f CNH America LLC.
Visit ur Web site at www.newholland.com/na. Or, call t ll-free 866-NEW-HLND (866-639-4563).