New Holland 600TL Series User manual

New Holland
600TL Series Front-End Loader Specifications
610TL 620TL
Page1of 1
LOADER MODEL 610TL 610TL 620TL 620TL
TRACTOR COMPATIBILITY TT45A TT50A TT60A TT75A
2WD 2WD 2WD 4WD 2WD 4WD
Max. lift height, in. (mm) 109.0 (2769) 111.7 (2837) 114.5 (2908) 118.0 (2997) 114.5 (2908) 118.0 (2997)
Dump clearance, in. (mm) 90.3 (2294) 93.0 (2362) 92.5 (2350) 93.0 (2362) 92.5 (2350) 93.0 (2362)
Digging depth, in. (mm) 6.0 (152) 5.5 (140) 5.0 (127) 5.5 (140) 5.0 (127) 5.5 (140)
Lift capacity @ 500 mm from
bucket pivot pin, lb. (kg) 1320 (599) 1320 (599) NA NA NA NA
Lift capacity @ 800 mm from
bucket pivot pin, lb. (kg) NA NA 2210 (1002) 2150 (975) 2210 (1002) 2150 (975)
Breakout force @ 500 mm from
bucket pivot pin, lb. (kg) 3400 (1542) 3400 (1542) NA NA NA NA
Breakout force @ 800 mm from
bucket pivot pin, lb. (kg) NA NA 4791 (2173) 4520 (2050) 4791 (2173) 4520 (2050)
Reach @ max. lift height, in. (mm) 24.3 (617) 24.3 (617) 34.0 (864) 26.0 (660) 34.0 (864) 26.0 (660)
Bucket rollback angle, degrees 20 20 23 26 23 26
Bucket dump angle, degrees 42 42 45 47 45 47
Loader specifications may varywith tractor model, hydraulic system, tire, size, etc.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
beforeusing the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
Visit our Web site at www.newholland.com/na Or, call toll-free: 1-888-290-7377
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
©2007 CNH America LLC
New Holland is a registered trademark of CNH America LLC.