Nexcom NViS 66162 Series User manual

NEXCOM International Co., Ltd.
NEXCOM International Co., Ltd.
Published February 2024 www.nexcom.com
Intelligent Digital Security
Video Intelligent Surveillance
NViS 66162/6602 Series
User Manual

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. ii NViS 66162/6602 Series User Manual
Content
Contents
Preface
Copyright ............................................................................................. iv
Disclaimer.............................................................................................. iv
Acknowledgements ............................................................................... iv
Regulatory Compliance Statements........................................................ iv
Declaration of Conformity...................................................................... iv
RoHS Compliance ................................................................................... v
Warranty and RMA ................................................................................ vi
Safety Information ................................................................................viii
Installation Recommendations...............................................................viii
Safety Precautions.................................................................................. ix
Technical Support and Assistance............................................................ x
Conventions Used in this Manual............................................................ x
Global Service Contact Information........................................................ xi
Package Contents.................................................................................xiii
Ordering Information ............................................................................xiii
Chapter 1: Product Introduction
NViS 66162 Overview .............................................................................1
Key Features........................................................................................1
Hardware Specifications..........................................................................2
NViS 6602 Overview ...............................................................................3
Key Features........................................................................................3
Hardware Specifications..........................................................................4
Knowing Your NViS 66xxx Series.............................................................5
Front Panel ..........................................................................................5
Rear Panel ...........................................................................................6
Mechanical Dimensions...........................................................................8
NViS 66162.........................................................................................8
NViS 6602...........................................................................................9
Chapter 2: Jumpers and Connectors
Before You Begin ..................................................................................10
Precautions ..........................................................................................10
Jumper Settings ....................................................................................11
Locations of the NViS66xxx Series Mainboard Jumpers and Connectors 12
External I/O Interfaces .......................................................................13
HDMI 1.4b Connector....................................................................13
DisplayPort 1.4 and HDMI 2.0b Connectors....................................14
LAN1 Connector and USB Ports......................................................15
LAN2 Connector and USB 3.2 Ports................................................16
Audio Jacks....................................................................................17
USB 2.0 Ports.................................................................................17
Internal I/O Interfaces .......................................................................18
Power Connector...........................................................................18
SATA Power Connectors.................................................................18
RAID SATA Connectors......................................................................19
M.2 Key B Slot ...............................................................................20
Front Panel Connector ...................................................................21
DB9 Output ...................................................................................21

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. iii NViS 66162/6602 Series User Manual
Content
M.2 Key M Slot..............................................................................22
GPIO Connector.............................................................................23
POE UART Connector.....................................................................23
PCIe Slot ........................................................................................24
Debug Connector ..........................................................................28
Fan Connectors..............................................................................29
POE Connector ..............................................................................30
POE Connector ..............................................................................30
NViS 66162 Block Diagram ...........................................................31
Locations of the NViS66612 POE Board Connectors ..............................32
Internal I/O Interfaces .......................................................................33
54V Power Connector....................................................................33
12V Power Connector....................................................................33
System Fan Connector ...................................................................34
12V Power Connector....................................................................34
LAN Connectors.............................................................................35
POE Board Block Diagram .............................................................36
Chapter 3: System Setup
Removing the Chassis Cover .................................................................37
Installing SO-DIMM DDR4 Memory Modules .........................................39
Installing a CPU.....................................................................................41
Installing an M.2 Module (Key M 2280) ................................................45
Installing an M.2 Module (Key B 2242)..................................................47
Installing 3.5” Storage Device(s)............................................................49
Installing a Graphic Card.......................................................................51
Reassembling the Chassis......................................................................55
Chapter 4: BIOS Setup
About BIOS Setup.................................................................................56
When to Configure the BIOS.................................................................56
Default Configuration...........................................................................57
Entering Setup......................................................................................57
Legends................................................................................................57
BIOS Setup Utility..................................................................................59
Main .................................................................................................59
Advanced..........................................................................................60
Chipset..............................................................................................77
Security .............................................................................................81
Boot..................................................................................................84
Save & Exit ........................................................................................85
MEBx.................................................................................................86
Appendix A: NViS 66162 Intel AMT Configuration
Appendix B: PCIe BUS Configuration
Appendix C: GPIO Instruction
Locating the GPIO Connector................................................................93
Understanding GPIO Pin Definitions ......................................................93
ISO GPIO 4IN_2OUT Block Diagram.......................................................94
Basic Configuration...............................................................................95
Appendix D: NViS 66162 RAID Configuration
Appendix E: Installing the System in a Rack

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. iv NViS 66162/6602 Series User Manual
Preface
PrefaCe
Copyright
This publication, including all photographs, illustrations and software, is
protected under international copyright laws, with all rights reserved. No
part of this manual may be reproduced, copied, translated or transmitted in
any form or by any means without the prior written consent from NEXCOM
International Co., Ltd.
Disclaimer
The information in this document is subject to change without prior notice and
does not represent commitment from NEXCOM International Co., Ltd. However,
users may update their knowledge of any product in use by constantly checking
its manual posted on our website: http://www.nexcom.com. NEXCOM shall
not be liable for direct, indirect, special, incidental, or consequential damages
arising out of the use of any product, nor for any infringements upon the rights
of third parties, which may result from such use. Any implied warranties of
merchantability or fitness for any particular purpose is also disclaimed.
Acknowledgements
NViS 66162/6602 Series is a trademarks of NEXCOM International Co., Ltd.
All other product names mentioned herein are registered trademarks of
their respective owners.
Regulatory Compliance Statements
This section provides the FCC compliance statement for Class B devices and
describes how to keep the system CE compliant.
Declaration of Conformity
FCC
This equipment has been tested and verified to comply with the limits for
a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. Operation of this equipment in a residential area
(domestic environment) is likely to cause harmful interference, in which
case the user will be required to correct the interference (take adequate
measures) at their own expense.
CE
The product(s) described in this manual complies with all applicable
European Union (CE) directives if it has a CE marking. For computer systems
to remain CE compliant, only CE-compliant parts may be used. Maintaining
CE compliance also requires proper cable and cabling techniques.

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. vNViS 66162/6602 Series User Manual
Preface
How to recognize NEXCOM RoHS Products?
For existing products where there are non-RoHS and RoHS versions, the
suffix “(LF)” will be added to the compliant product name.
All new product models launched after January 2013 will be RoHS compliant.
They will use the usual NEXCOM naming convention.
RoHS Compliance
NEXCOM RoHS Environmental Policy and Status
Update
NEXCOM is a global citizen for building the digital
infrastructure. We are committed to providing green
products and services, which are compliant with
European Union RoHS (Restriction on Use of Hazardous Substance in
Electronic Equipment) directive 2011/65/EU, to be your trusted green
partner and to protect our environment.
RoHS restricts the use of Lead (Pb) < 0.1% or 1,000ppm, Mercury (Hg) < 0.1%
or 1,000ppm, Cadmium (Cd) < 0.01% or 100ppm, Hexavalent Chromium
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or
1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm.
In order to meet the RoHS compliant directives, NEXCOM has established
an engineering and manufacturing task force to implement the introduction
of green products. The task force will ensure that we follow the standard
NEXCOM development procedure and that all the new RoHS components
and new manufacturing processes maintain the highest industry quality
levels for which NEXCOM are renowned.
The model selection criteria will be based on market demand. Vendors and
suppliers will ensure that all designed components will be RoHS compliant.

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. vi NViS 66162/6602 Series User Manual
Preface
Warranty and RMA
NEXCOM Warranty Period
NEXCOM manufactures products that are new or equivalent to new in
accordance with industry standard. NEXCOM warrants that products will
be free from defect in material and workmanship for 2 years, beginning on
the date of invoice by NEXCOM. HCP series products (Blade Server) which
are manufactured by NEXCOM are covered by a three year warranty period.
NEXCOM Return Merchandise Authorization (RMA)
▪Customers shall enclose the “NEXCOM RMA Service Form” with the
returned packages.
▪Customers must collect all the information about the problems
encountered and note anything abnormal or, print out any on-screen
messages, and describe the problems on the “NEXCOM RMA Service
Form” for the RMA number apply process.
▪Customers can send back the faulty products with or without accessories
(manuals, cable, etc.) and any components from the card, such as CPU
and RAM. If the components were suspected as part of the problems,
please note clearly which components are included. Otherwise, NEXCOM
is not responsible for the devices/parts.
▪Customers are responsible for the safe packaging of defective products,
making sure it is durable enough to be resistant against further damage
and deterioration during transportation. In case of damages occurred
during transportation, the repair is treated as “Out of Warranty.”
▪Any products returned by NEXCOM to other locations besides the
customers’ site will bear an extra charge and will be billed to the customer.
Repair Service Charges for Out-of-Warranty Products
NEXCOM will charge for out-of-warranty products in two categories, one is
basic diagnostic fee and another is component (product) fee.
Repair Service Charges for Out-of-Warranty Products
NEXCOM will charge for out-of-warranty products in two categories, one is
basic diagnostic fee and another is component (product) fee.
System Level
▪Component fee: NEXCOM will only charge for main components such as
SMD chip, BGA chip, etc. Passive components will be repaired for free,
ex: resistor, capacitor.
▪Items will be replaced with NEXCOM products if the original one cannot
be repaired. Ex: motherboard, power supply, etc.
▪Replace with 3rd party products if needed.
▪If RMA goods can not be repaired, NEXCOM will return it to the customer
without any charge.
Board Level
▪Component fee: NEXCOM will only charge for main components, such
as SMD chip, BGA chip, etc. Passive components will be repaired for free,
ex: resistors, capacitors.
▪If RMA goods can not be repaired, NEXCOM will return it to the customer
without any charge.

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. vii NViS 66162/6602 Series User Manual
Preface
Warnings
Read and adhere to all warnings, cautions, and notices in this guide and
the documentation supplied with the chassis, power supply, and accessory
modules. If the instructions for the chassis and power supply are inconsistent
with these instructions or the instructions for accessory modules, contact
the supplier to find out how you can ensure that your computer meets
safety and regulatory requirements.
Cautions
Electrostatic discharge (ESD) can damage system components. Do the
described procedures only at an ESD workstation. If no such station is
available, you can provide some ESD protection by wearing an antistatic
wrist strap and attaching it to a metal part of the computer chassis.

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. viii NViS 66162/6602 Series User Manual
Preface
Installation Recommendations
Ensure you have a stable, clean working environment. Dust and dirt can get
into components and cause a malfunction. Use containers to keep small
components separated.
Adequate lighting and proper tools can prevent you from accidentally
damaging the internal components. Most of the procedures that follow
require only a few simple tools, including the following:
▪A Philips screwdriver
▪A flat-tipped screwdriver
▪A grounding strap
▪An anti-static pad
Using your fingers can disconnect most of the connections. It is recommended
that you do not use needle-nose pliers to disconnect connections as these
can damage the soft metal or plastic parts of the connectors.
Safety Information
Before installing and using the device, note the following precautions:
▪Read all instructions carefully.
▪Do not place the unit on an unstable surface, cart, or stand.
▪Follow all warnings and cautions in this manual.
▪When replacing parts, ensure that your service technician uses parts
specified by the manufacturer.
▪Avoid using the system near water, in direct sunlight, or near a heating
device.
▪The load of the system unit does not solely rely for support from the
rackmounts located on the sides. Firm support from the bottom is highly
necessary in order to provide balance stability.
▪The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. ix NViS 66162/6602 Series User Manual
Preface
Safety Precautions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a
damp cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a stable surface during installation. Dropping it or
letting it fall may cause damage.
7. The openings on the enclosure are for air convection to protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting
the equipment to the power outlet.
9. Place the power cord in a way so that people will not step on it. Do not
place anything on top of the power cord. Use a power cord that has been
approved for use with the product and that it matches the voltage and
current marked on the product’s electrical range label. The voltage and
current rating of the cord must be greater than the voltage and current
rating marked on the product.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical
shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b.Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d.The equipment does not work well, or you cannot get it to work
according to the user’s manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. Do not place heavy objects on the equipment.
16. The unit uses a three-wire ground cable which is equipped with a third
pin to ground the unit and prevent electric shock. Do not defeat the
purpose of this pin. If your outlet does not support this kind of plug,
contact your electrician to replace your obsolete outlet.
17. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.
“ATTENTION: Risque d’explosion si la batterie est remplacée par un type
incorrect. Mettre au rebus les batteries usagées selon les instructions.“
18. This equipment is not suitable for use in locations where children are
likely to be present.
Cet équipement ne convient pas à une utilisation dans des lieux pouvant
accueillir des enfants.
19. Suitable for installation in Information Technology Rooms in accordance
with Article 645 of the National Electrical Code and NFPA 75.
Peut être installé dans des salles de matériel de traitement de l’information
conformément à l’article 645 du National Electrical Code et à la NFPA
75.

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. xNViS 66162/6602 Series User Manual
Preface
Technical Support and Assistance
1. For the most updated information of NEXCOM products, visit NEXCOM’s
website at www.nexcom.com.
2. For technical issues that require contacting our technical support team or
sales representative, please have the following information ready before
calling:
– Product name and serial number
– Detailed information of the peripheral devices
– Detailed information of the installed software (operating system,
version, application software, etc.)
– A complete description of the problem
– The exact wordings of the error messages
Warning!
1. Handling the unit: carry the unit with both hands and handle it with care.
2. Maintenance: to keep the unit clean, use only approved cleaning products
or clean with a dry cloth.
3. CompactFlash: Turn off the unit’s power before inserting or removing a
CompactFlash storage card.
4. The ITE is to be connected only to PoE networks without routing to the
outside plant.
Conventions Used in this Manual
Warning:
Information about certain situations, which if not observed,
can cause personal injury. This will prevent injury to yourself
when performing a task.
CAUTION!
CAUTION!CAUTION! Caution:
Information to avoid damaging components or losing data.
Note:
Provides additional information to complete a task easily.

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. xi NViS 66162/6602 Series User Manual
Preface
Global Service Contact Information
Headquarters
NEXCOM International Co., Ltd.
9F, No. 920, Zhongzheng Rd.,
Zhonghe District, New Taipei City, 23586,
Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
www.nexcom.com
Asia
Taiwan
NexAIoT Headquarters
Industry 4.0 and Cloud Services
12F, No.922, Zhongzheng Rd.,
Zhonghe District, New Taipei City,
23586, Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexaiot.com
NexAIoT Co., Ltd.
Taichung Office
16F, No.250, Sec.2, Chongde Rd.,
Beitun District,
Taichung City, 406, Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexaiot.com
NexCOBOT Taiwan Co., Ltd.
13F, No.916, Zhongzheng Rd.,
Zhonghe District,
New Taipei City, 23586, Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcobot.com
GreenBase Technology Corp.
13F, No.922, Zhongzheng Rd.,
Zhonghe District,
New Taipei City, 23586, Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.com.tw
DivioTec Inc.
19F-1A, No.97, Sec.4, ChongXin Rd.,
Sanchong District,
New Taipei City, 24161, Taiwan, R.O.C.
Tel: [phone]
Email: [email protected]
www.diviotec.com
AIoT Cloud Corp.
13F, No.922, Zhongzheng Rd.,
Zhonghe District,
New Taipei City, 23586, Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.aiotcloud.dev
EMBUX TECHNOLOGY CO., LTD.
13F, No.916, Zhongzheng Rd.,
Zhonghe District,
New Taipei City, 23586, Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.embux.com
TMR TECHNOLOGIES CO., LTD.
13F, No.916, Zhongzheng Rd.,
Zhonghe District,
New Taipei City, 23586, Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.tmrtek.com

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. xii NViS 66162/6602 Series User Manual
Preface
NEXGOL Chongqing
1st Building No.999,
Star Boulevard, Yongchuan Dist,
Chongqing City, 402160, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.cn
Beijing NexGemo Technology Co.,Ltd.
Room 205, No.1, Fazhan Rd.,
Beijing International Information Industry Base,
Changping District,
Beijing, 102206, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexgemo.com
Japan
NEXCOM Japan
9F, Tamachi Hara Bldg.,
4-11-5, Shiba Minato-ku,
Tokyo, 108-0014, Japan
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom-jp.com
China
NEXSEC Incorporated
201, Floor 2, Unit 2, Building 15, Yard 3,
Gaolizhang Road, Haidian District,
Beijing, 100094, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexsec.cn
NEXCOM Shanghai
Room 406-407, Building C, No 154, Lane 953,
Jianchuan Road, Minhang District,
Shanghai, 201108, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.cn
NEXCOM Surveillance Technology Corp.
Floor 8, Building B3, Xiufeng Industrial Zone,
GanKeng Community, Buji Street,
LongGang District,
ShenZhen, 518112, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.cn
America
USA
NEXCOM USA
46665 Fremont Blvd.,
Fremont CA 94538, USA
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcomusa.com

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. xiii NViS 66162/6602 Series User Manual
Preface
Ordering Information
The following information below provides ordering information for the
NViS 66162 and 6602 series.
NViS 66162 (P/N: 10C00661600X0)
2U desktop NVR with 16 port built-in PoE
NViS 6602 (P/N: 10C00660200X0)
2U desktop NVR with PCIe x16 support
Package Contents
Before continuing, verify that the NViS66162/6602 package that you received
is complete. Your package should have all the items listed in the following
table.
No. Item Details
1System
2CPU Cooler Box
Box
CPU Cooler
Thermal Grease
3Accessories
PE Zipper Bag #8
Cable Tie
Terminal Block 10Pin
PE Zipper Bag #3
Flat Head Screw:F6#32Tx5mm Nylok NIGP * 8pcs
4EPE Front*2 pcs
5EPE Rear*2 pcs

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. 1NViS 66162/6602 Series User Manual
Chapter 1: Product Introduction
ChaPter 1: ProduCt IntroduCtIon
Key Features
▪System 2U Desktop
▪12th Gen Intel®Core™ Platform
▪HDD 2 bays 3.5”+ 3.5” (support RAID 0,1)
▪1 x NVMe SSD, 1 x M.2 2242 SATA SSD
▪Display 1 x DP 1.4, 1 x HDMI 2.0b, 1 x HDMI 1.4b
▪DDR4 up to 64GB
▪2 x 2.5GbE Intel®Ethernet
▪Audio (Line-in/Line-out/Mic)
▪16 x 10/100 PoE (240W max PSE)
▪PCIe x16
NViS 66162 Overview

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. 2NViS 66162/6602 Series User Manual
Chapter 1: Product Introduction
Hardware Specifications
CPU Support
▪Intel®Core™ i9-12900E/i7-12700E/i5-12500E/i3-12100E
Main Memory
▪2 x DDR4 SO-DIMM Non-ECC support up to 64G
Platform Control Hub
▪Intel®Q670E
I/O Interface-Front
▪2 x Hot swappable 3.5” HDD bays
▪2 x USB 2.0 Type-A (per port output max 500mA)
I/O Interface-Rear
▪4 x USB 3.2 Gen1, Type-A (Per port output Max 900mA)
▪1 x DP 1.4 (4K@60Hz)
▪1 x HDMI 2.0b (4K@60Hz)
▪1 x HDMI 1.4b (4K@30Hz)
▪1 x Audio port (Line-in/Line-out/Mic)
▪2 x RJ45 LAN (2 x 2.5GbE)
▪1 x 4DI/2DO GPIO terminal block (optional)
▪16 x 10/100 PoE (240W max PSE)
▪1 x COM (RS232/RS485) Port
Expansions
▪2 x PCIe by 16 slots, support x16 lanes (riser slot could be compatible one
x16 or two x8)
Storage
▪Hot swappable 3.5” HDD x 2
▪M.2 2280 Key M support NVMe Gen4
▪M.2 2242 Key B support SATA3
Power Input
▪Single PSU 600W
Dimensions
▪430mm (W) x 84mm (H) x 330mm (D)
Environment
▪Operating temperature: Ambient with air flow: 0°C ~ 40°C
▪Storage temperature: -20°C ~ 70°C
▪Relative humidity: 0% ~ 90% (non-condensing)
Certifications
▪CE approval
▪FCC Class A
▪UL compliance

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. 3NViS 66162/6602 Series User Manual
Chapter 1: Product Introduction
Key Features
▪System 2U desktop
▪12th Gen Intel®Core™
▪HDD 2bays 3.5”+ 3.5” (support RAID 0,1)
▪1 x NVME SSD, 1 x M.2 2242 SATA SSD
▪Display DP1.4, HDMI 2.0b x 1, HDMI 1.4b x 1
▪DDR4 up to 64GB
▪2 x 2.5GbE Intel®Ethernet
▪Audio in/out/Mic
▪PCIe x16
NViS 6602 Overview

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. 4NViS 66162/6602 Series User Manual
Chapter 1: Product Introduction
Hardware Specifications
CPU Support
▪Intel®Core™ i9-12900E/i7-12700E/i5-12500E/i3-12100E
Main Memory
▪2 x DDR4 SO-DIMM non-ECC support up to 64G
▪Support OOB ECC in R680E
Platform Control Hub
▪Intel®Q670E (option R680E)
I/O Interface-Front
▪2 x Hot swappable 3.5” HDD bays
▪2 x USB 2.0 Type-A (per port output Max 500mA)
I/O Interface-Rear
▪4 x USB 3.2 Gen1, Type-A (Per port output Max 900mA)
▪1 x DP 1.4 (4K@60)
▪1 x HDMI 2.0b (4K@60Hz)
▪1 x HDMI 1.4b (4K@30Hz)
▪1 x Audio port (Line in/Line out/MIC)
▪2 x RJ45 LAN (2 x 2.5Gps)
▪1 x 4DI/2DO GPIO terminal block (option)
▪1 x COM (RS232/RS485) Port
Expansions
▪2 x PCIe by 16 slots, support x 16 lanes (riser slot could be compatible
one x16 or two x8)
Storage
▪Hot swappable 3.5” HDD x 2
▪M.2 2280 Key M support NVMe Gen4
▪M.2 2242 Key B support SATA3
Power Input
▪Single PSU 600W
Dimensions
▪430mm (W) x 84mm (H) x 330mm (D)
Environment
▪Operating temperature: Ambient with air flow: 0°C ~ 40°C
▪Storage temperature: -20°C ~ 70°C
▪Relative humidity: 0% ~ 90% (non-condensing)
Certifications
▪CE approval
▪FCC Class A
▪UL compliance

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. 5NViS 66162/6602 Series User Manual
Chapter 1: Product Introduction
Knowing Your NViS 66xxx Series
Front Panel
1. Swappable 3.5” HDD bays
Used to connect 3.5” hard disk drives.
2. Power LED Indicator
Lights up when power is on.
3. Dual USB 2.0 Ports
Used to connect USB 2.0 devices.
4. HDD Activity LED Indicator
Lights up when hard disk drive is operating.
1 2 3 4

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. 6NViS 66162/6602 Series User Manual
Chapter 1: Product Introduction
Rear Panel
5. Power Switch
Used to power on the device.
6. DisplayPort 1.4 Connector
Supports DP1.4 displays.
7. 2.5 GbE RJ45
Used to connect the system to a local area network.
8. GPIO Terminal Block
Connects to an external device with a maximum load of 24V, 1.0A.
9. PCIe Slots
Supports x16 lanes (up to 1 x16 + 1 x4, 2 x8 + 1 x4)
5 6 7 98

Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved. 7NViS 66162/6602 Series User Manual
Chapter 1: Product Introduction
10. 100~240V AC Input
Used to plug a AC power cord.
11. HDMI 1.4b Connector
Supports HDMI 1.4b displays.
12. HDMI 2.0b Connector
Supports HDMI 2.0b displays.
13. USB3.2 Gen 1 Ports
Connects the system with USB 3.2 Gen1, Type-A devices.
14. Audio Connectors (Line in/Line out/MIC in)
Line in: Receives audio signal input
Line out: Provides audio signal output
MIC-in: Connects an external microphone
15. COM Port
Supports RS232 and RS485 compatible serial devices.
16. 10/100 PoE LAN Ports (NViS 66162 only)
Enables communication among network clients and delivers power
using the same RJ45 to PoE-enabled edge devices. 16ch PoE ports
10/100 Mbps, compliance with total 240W max.
10 11 12 1513 14 16