Nexcom NIFE 200 User manual

NEXCOM International Co., Ltd.
NEXCOM International Co., Ltd.
Published January 2018 www.nexcom.com
IoT Automation Solutions Business Group
PC-based Factory Automation System
NIFE 200 Series
User Manual

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. ii NIFE 200 Series User Manual
Content
Contents
Preface
Copyright ............................................................................................. iv
Disclaimer.............................................................................................. iv
Acknowledgements ............................................................................... iv
Regulatory Compliance Statements........................................................ iv
Declaration of Conformity...................................................................... iv
RoHS Compliance ................................................................................... v
Warranty and RMA ................................................................................ vi
Safety Information ................................................................................viii
Installation Recommendations...............................................................viii
Safety Precautions.................................................................................. ix
Technical Support and Assistance............................................................ x
Conventions Used in this Manual............................................................ x
Global Service Contact Information........................................................ xi
Package Contents.................................................................................xiii
Ordering Information ............................................................................xiv
Chapter 1: Product Introduction
Overview ................................................................................................1
Key Features ...........................................................................................1
Hardware Specifications..........................................................................2
Knowing Your NIFE 200/200P2 ...............................................................4
Front View...........................................................................................4
Top View .............................................................................................5
Mechanical Dimensions...........................................................................6
NIFE 200..............................................................................................6
NIFE 200P2..........................................................................................7
Chapter 2: Jumpers and Connectors
Before You Begin ....................................................................................8
Precautions ............................................................................................8
Jumper Settings ......................................................................................9
Locations of the Jumpers and Connectors for NIFB 200.........................10
Jumpers................................................................................................11
AT/ATX Mode Select.......................................................................11
RTC Connector ..............................................................................11
Connector Pin Definitions .....................................................................12
External I/O Interfaces - Front Panel ...................................................12
DVI-I Connector .............................................................................12
DisplayPort Connector....................................................................12
LAN1 and USB 3.0/USB 2.0 Ports....................................................13
LAN2 and USB 2.0 Ports.................................................................14
COM 1 Port (RS232/422/485).........................................................15
COM 2 Port (RS232/422/485).........................................................15
24V DC Power Input ......................................................................16
LED Indicators ................................................................................16
Internal Connectors...........................................................................17
SATA Connector.............................................................................17
SATA Power Connector ..................................................................17
Internal USB Dongle Connector......................................................18
SD Card Slot ..................................................................................18

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. iii NIFE 200 Series User Manual
Content
Debug Card Connector..................................................................19
Line-out Pin Header........................................................................19
Power Connector...........................................................................20
PS2 KB/MS Pin Header ...................................................................20
Remote Push Button Connector .....................................................21
System Reset Connector.................................................................21
Battery Connector..........................................................................22
Internal COM3 Connector..............................................................22
Internal COM4 Connector..............................................................23
Internal GPIO Pin Header................................................................23
Mini-PCIe Connector......................................................................24
Mini-PCIe Connector......................................................................25
Chapter 3: System Setup
Installing a SO-DIMM Memory Module .................................................26
Installing a 2.5” SATA HDD ...................................................................29
Installing a Mini-PCIe Module (Half-Size) ...............................................32
Installing a Mini-PCIe Module (Full-Size) ................................................35
Installing a SD Card or SIM Card ...........................................................37
SD Card Installation Instructions ........................................................37
SIM Card Installation Instructions.......................................................39
Installing an Antenna or Audio Cable....................................................41
Antenna Installation Instructions........................................................41
Audio Cable Installation Instructions..................................................43
Removing the Side Cover......................................................................45
Installing a PCI or PCIe Card..................................................................47
Chapter 4: BIOS Setup
About BIOS Setup.................................................................................53
When to Configure the BIOS.................................................................53
Default Configuration...........................................................................54
Entering Setup......................................................................................54
Legends................................................................................................54
BIOS Setup Utility..................................................................................56
Main .................................................................................................56
Advanced .........................................................................................57
Chipset..............................................................................................64
Security .............................................................................................66
Boot..................................................................................................67
Save & Exit ........................................................................................67
Appendix A: Power Consumption ........................68
Appendix B: GPI/O Programming Guide ..............69
Appendix C: Watchdog Timer Setting..................71
Appendix D: LED Programming Guide .................72

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. iv NIFE 200 Series User Manual
Preface
PrefaCe
Copyright
This publication, including all photographs, illustrations and software, is
protected under international copyright laws, with all rights reserved. No
part of this manual may be reproduced, copied, translated or transmitted in
any form or by any means without the prior written consent from NEXCOM
International Co., Ltd.
Disclaimer
The information in this document is subject to change without prior notice and
does not represent commitment from NEXCOM International Co., Ltd. However,
users may update their knowledge of any product in use by constantly checking
its manual posted on our website: http://www.nexcom.com. NEXCOM shall
not be liable for direct, indirect, special, incidental, or consequential damages
arising out of the use of any product, nor for any infringements upon the rights
of third parties, which may result from such use. Any implied warranties of
merchantability or fitness for any particular purpose is also disclaimed.
Acknowledgements
NIFE 200, NIFE 200P2 and NIFE 200P2E are trademarks of NEXCOM
International Co., Ltd. All other product names mentioned herein are
registered trademarks of their respective owners.
Regulatory Compliance Statements
This section provides the FCC compliance statement for Class A devices and
describes how to keep the system CE compliant.
Declaration of Conformity
FCC
This equipment has been tested and verified to comply with the limits for
a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. Operation of this equipment in a residential area
(domestic environment) is likely to cause harmful interference, in which
case the user will be required to correct the interference (take adequate
measures) at their own expense.
CE
The product(s) described in this manual complies with all applicable
European Union (CE) directives if it has a CE marking. For computer systems
to remain CE compliant, only CE-compliant parts may be used. Maintaining
CE compliance also requires proper cable and cabling techniques.

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. vNIFE 200 Series User Manual
Preface
RoHS Compliance
NEXCOM RoHS Environmental Policy and Status
Update
NEXCOM is a global citizen for building the digital
infrastructure. We are committed to providing green
products and services, which are compliant with
European Union RoHS (Restriction on Use of Hazardous Substance in
Electronic Equipment) directive 2011/65/EU, to be your trusted green
partner and to protect our environment.
RoHS restricts the use of Lead (Pb) < 0.1% or 1,000ppm, Mercury (Hg) < 0.1%
or 1,000ppm, Cadmium (Cd) < 0.01% or 100ppm, Hexavalent Chromium
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or
1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm.
In order to meet the RoHS compliant directives, NEXCOM has established
an engineering and manufacturing task force to implement the introduction
of green products. The task force will ensure that we follow the standard
NEXCOM development procedure and that all the new RoHS components
and new manufacturing processes maintain the highest industry quality
levels for which NEXCOM are renowned.
The model selection criteria will be based on market demand. Vendors and
suppliers will ensure that all designed components will be RoHS compliant.
How to recognize NEXCOM RoHS Products?
For existing products where there are non-RoHS and RoHS versions, the
suffix “(LF)” will be added to the compliant product name.
All new product models launched after January 2013 will be RoHS compliant.
They will use the usual NEXCOM naming convention.

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. vi NIFE 200 Series User Manual
Preface
Warranty and RMA
NEXCOM Warranty Period
NEXCOM manufactures products that are new or equivalent to new in
accordance with industry standard. NEXCOM warrants that products will
be free from defect in material and workmanship for 2 years, beginning on
the date of invoice by NEXCOM. HCP series products (Blade Server) which
are manufactured by NEXCOM are covered by a three year warranty period.
NEXCOM Return Merchandise Authorization (RMA)
▪Customers shall enclose the “NEXCOM RMA Service Form” with the
returned packages.
▪Customers must collect all the information about the problems
encountered and note anything abnormal or, print out any on-screen
messages, and describe the problems on the “NEXCOM RMA Service
Form” for the RMA number apply process.
▪Customers can send back the faulty products with or without accessories
(manuals, cable, etc.) and any components from the card, such as CPU
and RAM. If the components were suspected as part of the problems,
please note clearly which components are included. Otherwise, NEXCOM
is not responsible for the devices/parts.
▪Customers are responsible for the safe packaging of defective products,
making sure it is durable enough to be resistant against further damage
and deterioration during transportation. In case of damages occurred
during transportation, the repair is treated as “Out of Warranty.”
▪Any products returned by NEXCOM to other locations besides the
customers’ site will bear an extra charge and will be billed to the customer.
Repair Service Charges for Out-of-Warranty Products
NEXCOM will charge for out-of-warranty products in two categories, one is
basic diagnostic fee and another is component (product) fee.
Repair Service Charges for Out-of-Warranty Products
NEXCOM will charge for out-of-warranty products in two categories, one is
basic diagnostic fee and another is component (product) fee.
System Level
▪Component fee: NEXCOM will only charge for main components such as
SMD chip, BGA chip, etc. Passive components will be repaired for free,
ex: resistor, capacitor.
▪Items will be replaced with NEXCOM products if the original one cannot
be repaired. Ex: motherboard, power supply, etc.
▪Replace with 3rd party products if needed.
▪If RMA goods can not be repaired, NEXCOM will return it to the customer
without any charge.
Board Level
▪Component fee: NEXCOM will only charge for main components, such
as SMD chip, BGA chip, etc. Passive components will be repaired for free,
ex: resistors, capacitors.
▪If RMA goods can not be repaired, NEXCOM will return it to the customer
without any charge.

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. vii NIFE 200 Series User Manual
Preface
Warnings
Read and adhere to all warnings, cautions, and notices in this guide and
the documentation supplied with the chassis, power supply, and accessory
modules. If the instructions for the chassis and power supply are inconsistent
with these instructions or the instructions for accessory modules, contact
the supplier to find out how you can ensure that your computer meets
safety and regulatory requirements.
Cautions
Electrostatic discharge (ESD) can damage system components. Do the
described procedures only at an ESD workstation. If no such station is
available, you can provide some ESD protection by wearing an antistatic
wrist strap and attaching it to a metal part of the computer chassis.

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. viii NIFE 200 Series User Manual
Preface
Installation Recommendations
Ensure you have a stable, clean working environment. Dust and dirt can get
into components and cause a malfunction. Use containers to keep small
components separated.
Adequate lighting and proper tools can prevent you from accidentally
damaging the internal components. Most of the procedures that follow
require only a few simple tools, including the following:
▪A Philips screwdriver
▪A flat-tipped screwdriver
▪A grounding strap
▪An anti-static pad
Using your fingers can disconnect most of the connections. It is recommended
that you do not use needle-nose pliers to disconnect connections as these
can damage the soft metal or plastic parts of the connectors.
Safety Information
Before installing and using the device, note the following precautions:
▪Read all instructions carefully.
▪Do not place the unit on an unstable surface, cart, or stand.
▪Follow all warnings and cautions in this manual.
▪When replacing parts, ensure that your service technician uses parts
specified by the manufacturer.
▪Avoid using the system near water, in direct sunlight, or near a heating
device.
▪The load of the system unit does not solely rely for support from the
rackmounts located on the sides. Firm support from the bottom is highly
necessary in order to provide balance stability.
▪The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. ix NIFE 200 Series User Manual
Preface
Safety Precautions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a
damp cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a stable surface during installation. Dropping it or
letting it fall may cause damage.
7. The openings on the enclosure are for air convection to protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting
the equipment to the power outlet.
9. Place the power cord in a way so that people will not step on it. Do not
place anything on top of the power cord. Use a power cord that has been
approved for use with the product and that it matches the voltage and
current marked on the product’s electrical range label. The voltage and
current rating of the cord must be greater than the voltage and current
rating marked on the product.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical
shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b.Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d.The equipment does not work well, or you cannot get it to work
according to the user’s manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. Do not place heavy objects on the equipment.
16. The unit uses a three-wire ground cable which is equipped with a third
pin to ground the unit and prevent electric shock. Do not defeat the
purpose of this pin. If your outlet does not support this kind of plug,
contact your electrician to replace your obsolete outlet.
17. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.
18. This product is intended to be supplied by a Listed Power Adapter,
suitable for use at Tma 55 degree C whose output meets SELV and
rating is 24Vdc, 2.5A min.

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. xNIFE 200 Series User Manual
Preface
Technical Support and Assistance
1. For the most updated information of NEXCOM products, visit NEXCOM’s
website at www.nexcom.com.
2. For technical issues that require contacting our technical support team or
sales representative, please have the following information ready before
calling:
– Product name and serial number
– Detailed information of the peripheral devices
– Detailed information of the installed software (operating system,
version, application software, etc.)
– A complete description of the problem
– The exact wordings of the error messages
Warning!
1. Handling the unit: carry the unit with both hands and handle it with care.
2. Maintenance: to keep the unit clean, use only approved cleaning products
or clean with a dry cloth.
3. CompactFlash: Turn off the unit’s power before inserting or removing a
CompactFlash storage card.
Conventions Used in this Manual
Warning:
Information about certain situations, which if not observed,
can cause personal injury. This will prevent injury to yourself
when performing a task.
CAUTION!
CAUTION!CAUTION! Caution:
Information to avoid damaging components or losing data.
Note:
Provides additional information to complete a task easily.

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. xi NIFE 200 Series User Manual
Preface
Global Service Contact Information
Headquarters
NEXCOM International Co., Ltd.
9F, No. 920, Chung-Cheng Rd.,
ZhongHe District, New Taipei City, 23586,
Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
www.nexcom.com
America
USA
NEXCOM USA
2883 Bayview Drive,
Fremont CA 94538, USA
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.com
Asia
Taiwan
NEXCOM Intelligent Systems
Taipei Office
13F, No.920, Chung-Cheng Rd.,
ZhongHe District,
New Taipei City, 23586, Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.com.tw
NEXCOM Intelligent Systems
Taichung Office
16F, No.250, Sec. 2, Chongde Rd.,
Beitun Dist.,
Taichung City 406, R.O.C.
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.com.tw
Japan
NEXCOM Japan
9F, Tamachi Hara Bldg.,
4-11-5, Shiba Minato-ku,
Tokyo, 108-0014, Japan
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom-jp.com
China
NEXCOM China
Floor 5, No.4, No.7 fengxian middle Rd.,
(Beike Industrial Park), Haidian District,
Beijing, 100094, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.cn

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. xii NIFE 200 Series User Manual
Preface
Europe
United Kingdom
NEXCOM EUROPE
10 Vincent Avenue,
Crownhill Business Centre,
Milton Keynes, Buckinghamshire
MK8 0AB, United Kingdom
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.eu
Italy
NEXCOM ITALIA S.r.l
Via Lanino 42,
21047 Saronno (VA), Italia
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcomitalia.it
NEXCOM Shanghai
Room 603/604, Huiyinmingzun Plaza Bldg., 1,
No.609, Yunlin East Rd.,
Shanghai, 200333, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.cn
NEXCOM Surveillance Technology Corp.
Room202, Building B,
the GuangMing Industrial Zone Zhonghua Rd.,
Minzhi Street, Longhua District,
Shenzhen 518131, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.cn
NEXCOM United System Service
Hui Yin Ming Zun Building Room 1108,
Building No. 11, 599 Yunling Road, Putuo District,
Shanghai, 200062, China
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.nexcom.cn

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. xiii NIFE 200 Series User Manual
Preface
Package Contents
Before continuing, verify that the package that you received is complete.
Your package should have all the items listed in the following table.
Item Part Number Description Specification Qty
1 4NCPF00310X00 Terminal Blocks 3P Phoenix Contact:1803581 3.81mm Female DIP Green 1
2 4NCPM00302X00 (T)Terminal Blocks 3P Phoenix Contact:1777992 5.08mm Male DIP Green 1
3 50311F0295X00 Flat Head Screw Long Fei:F2x4 NYLOK NIGP F2x4 NIGP NYLOK 2
4 50311F0326X00 Flat Head Screw Long Fei:F3x5 NYLOK NI+Heat Treatment F3x5 NYLOK NI+Heat Treatment 4
5 50311F0330X00 Round Head Screw Long Fei:P2x3 ISO+NYLON P2x3 NI NYLOK 4
6 50311P0001X00 Price for Plastic Screw HS6-75P 75mm 2
7 50322P0002X00 Plastic Nut Gin Lian:M6HW 10mmx6mm 2
8 5060900226X00 Mini PCIe Bracket CHYUAN-JYH 29x30x2.1mm SPCC t=1.0mm NI 1
9 6012200052X00 PE Zipper Bag #8 170x240mm, w/China RoHS Symbol 1
10 6012200053X00 PE Zipper Bag #3 100x70mm, w/China RoHS Symbol 2
11 60177A0464X00 (E)NIFE 200 Quick Reference Guide VER:A SIZE:A4 KRAMER 1
12 602DCD1049X00 (E)NIFE 200 DVD Driver VER:1.0 JCL 1
13 7800000078X00 DVI-I to VGA Adapter for NISE 104 ST:ADDH27B DVI-I (24+5) Pin Male to VGA 15-pin Female 1

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. xiv NIFE 200 Series User Manual
Preface
Ordering Information
The following information below provides ordering information for
NIFE 200 series.
NIFE 200 (P/N: 10J70020000X0)
Intel®Atom™ processor J1900 Quad Cord 2.0GHz fanless system
NIFE 200P2 (P/N: 10J70020001X0)
Intel®Atom™ processor J1900 Quad Core 2.0GHz fanless system
24V, 60W AC/DC power adapter w/ o power cord (P/N: 7400060024X00)

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. 1NIFE 200 Series User Manual
Chapter 1: Product Introduction
ChaPter 1: ProduCt IntroduCtIon
Key Features
▪Onboard Intel®Celeron®processor J1900 Quad Core 2.0GHz
▪Dual independent display from DP and DVI-I
▪2x Intel®I210AT GbE LAN ports support WoL, Teaming and PXE
▪3x USB 2.0 & 1x USB 3.0
▪2x RS232/422/485
Overview
▪2x Mini-PCIe socket for optional Wi-Fi/3.5G/4G LTE/Fieldbus modules
▪Top access SD card socket
▪Support -5 ~ 55 degree C operating temperature
▪Typical 24V DC input with +/-20% range
NIFE 200 NIFE 200P2

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. 2NIFE 200 Series User Manual
Chapter 1: Product Introduction
Hardware Specifications
CPU Support
▪Onboard Intel®Celeron®processor J1900 Quad Core 2.0GHz
▪Support Intel®Atom™ E3800 processor family from single core E3815,
Dual Core E3825/E3826/E3827 and Quad Core E3845 with different
SKUs
Main Memory
▪2x DDR3L SO-DIMM socket, support DDR3L 1066/1333 8GB RAM max.,
un-buffered and non-ECC
Display Option
▪Dual independent display
– DVI-I and DP
I/O Interface - Front
▪ATX power on/off switch
▪LEDs for HDD LED, Battery LEDs, Power LED, COM port TX/RX, 5x
programmable GPO LEDs
▪1x External SD Card
▪1x SIM card holder
▪2x Intel®I210AT GbE LAN ports, support WoL, Teaming and PXE
▪1x DP display output
▪1x DVI-I display output
▪1x USB 3.0 (900mA per each)
▪3x USB 2.0 (500mA per each)
▪2x RS232/422/485 support auto flow control
– Jumper-free setting on RS232/422/485
– Support 2.5KV isolation protection on COM1
▪1x 3-pin DC input, Typical 24V DC input with +/-20% range
Storage Device
▪1x 2.5” SSD/HDD (SATA 2.0) -- front accessible
▪1x SD card (Data storage only)
▪1x mSATA
Expansion Slot
▪Two PCI Expansions (NIFE 200P2 only)
– Add-on card length: 176mm max.
– Power consumption: 10W/ slot max.
▪2x Mini-PCIe sockets for optional Wi-Fi/3.5G/4G LTE/Fieldbus modules
Power Requirements
▪Typical 24V DC input with +/-20% range
▪1x optional 24V, 60W power adapter
Dimensions
▪NIFE 200: 85mm (W) x 157mm (D) x 214mm (H)
▪NIFE 200P2: 151mm (W) x 157mm (D) x 230mm (H)
Construction
▪Aluminum and metal chassis with fanless design
Environment
▪Operating temperature:
Ambient with air flow: -5°C to 55°C
(According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
▪Storage temperature: -20°C to 80°C
▪Relative humidity: 10% to 95% (non-condensing)

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. 3NIFE 200 Series User Manual
Chapter 1: Product Introduction
▪Shock protection:
– HDD: 20G, half sine, 11ms, IEC60068-2-27
– SSD: 50G, half sine, 11ms, IEC60068-2-27
▪Vibration protection w/SSD condition:
– Random: 2Grms @ 5 ~ 500Hz, IEC60068-2-64
– Sinusoidal: 2Grms @ 5 ~ 500Hz, IEC60068-2-6
Certifications
▪CE Approval
– EN61000-6-2
– EN61000-6-4
▪FCC Class A
▪LVD
▪UL60950
Support OS
▪Windows 8, 32-bit/64-bit
▪Windows Embedded Standard 8, 32-bit/64-bit
▪Windows 7, 32-bit/64-bit
▪Windows Embedded Standard 7, 32-bit/64-bit
▪Linux Kernel version 3.8.0

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. 4NIFE 200 Series User Manual
Chapter 1: Product Introduction
Knowing Your NIFE 200/200P2
Front View
LED Indicators
Indicates the power, hard drive, battery, COM1/2 and GPO activity of the
system.
DVI-I
Used to connect a digital LCD panel.
DisplayPort
Used to connect the system with display devices.
LAN Ports
Two LAN ports used to connect the system to a local area network.
USB Ports
USB 2.0 and USB 3.0 ports to connect the system with USB devices.
HDD Bay
A hard drive bay used to install 2.5” HDDs.
COM1 and COM2
Two DB9 ports used to connect RS232/422/485 compatible devices.
Power Button
Press to power-on or power-off the system.
24V DC Input
Used to plug a DC power cord.
NIFE 200
Power
Button
DVI-I
LED
Indicators
24V DC Input
HDD Bay
LAN & USB
Ports
COM
Ports
DisplayPort
NIFE 200P2

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. 5NIFE 200 Series User Manual
Chapter 1: Product Introduction
Top View
NIFE 200P2 has the same top panel connectors as NIFE 200, with two additional
PCI expansions.
PCI Expansions
Two PCI expansion slots for add-on cards.
Remote On/Off Switch
Used to connect a remote to power on/off the system.
SD Card Slot
Used to insert a SD card.
SIM Slot
Used to insert a SIM card.
PCI
NIFE 200
SD Card & SIM
NIFE 200P2
Remote
On/Off

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved. 6NIFE 200 Series User Manual
Chapter 1: Product Introduction
Mechanical Dimensions
NIFE 200
R4
157
85
63 4.2
202.80
213.80 182.00
63