Next 855089 User manual

855089 LOFT DOUBLE CARCASS
1 of 12 P5--MKK2
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple
step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• We recommend the use of the wall attachment bracket for safety reasons.
Helpline
If you have any problems with this
product or require any replacement
fittings please contact Customer
Services Tel: [phone]
Regrettably self assembly items cannot be returned once assembly is part or fully completed
unless the item is found to be faulty. Should you need to return the unassembled product,
please repack in the original packaging.
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down
the lacquer finish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
Avoid keeping furniturein direct sunlight or closeto any heat sources as this can cause cracking,
discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
All assembly fixings should always be tightened properly and periodically check all fixings and
tighten if necessary.
• The finish will mellow and change colour over time.
CARE INSTRUCTIONS
PRODUCT INFORMATION
Tools Needed
Made in Poland.

2 PERSON ASSEMBLY
ASSEMBLED DIMENSIONS
APPROXIMATE ASSEMBLY TIME
REQUIRED ASSEMBLY TOOLS
REQUIRED ASSEMBLY SPACE
FLOOR AREA
2.0 M x 2,0 M
1.5 hrs
DESCRIPTION:
Assembly
Instruction
2 of 12
873 mm
1775 mm
500mm
P5--MKK2
855089 LOFT DOUBLE CARCASS

1
DESCRIPTION:
Assembly
Instruction
3 of 12
PARTS LIST
NO. PART LIST QTY
(1) BOTTOM PANEL
(2) PLINTH
(3) LEFT SIDE PANEL
(4) HORIZONTAL DIVIDER
(5) TOP PANEL
(6) BACK PANEL
(7) RIGHT SIDE PANEL
1
1
1
2
1
1
1
P5--MKK2
5
2
3
7
4
4
6
855089 LOFT DOUBLE CARCASS

HARDWARE LIST
DESCRIPTION:
10 20 30 40 50 60 70 80 90 100 mm
Assembly
Instruction
DO NOT MIX CONTENT OF HARDWARE BOXES
4 of 12
16x
CAM BOLT
C
BAG 1
Ø5x39mm
A
++
16x
CAM LOCK
19x
8x28mm
DOWEL B
BAG 1 BAG 1
Ø15x12mm
P5--MKK2
D
18x
PLASTIC
SUPPORT
BAG 1
F
8x
3,0x20mm
SCREW
BAG 1
G
12x
CAM COVER
BAG 1
I
2x
1x
3,5x13mm
90x40x15mm
SCREW
BAG 2 BAG 2
MOUNTING BRACKET K
J
1:2
WHEN CARCASS IS ASSEMBLED PLEASE REFER TO FURTHER
INSTRUCTIONS INCLUDED WITH THE DOORS
6x
HINGE PLATE
1:2
E
12x
6,3x13mm
SCREW
E1
HINGES PLATE “E” FOR FIXING DOORS
ARE INCLUDED WITH THE DOORS.
2x
BAG 2
2x
BAG 2
3x13mm
D1
SCREW
CLOTHIES BAR
SUPPORT
1x
L=830 mm
CLOTHES BAR
H
855089 LOFT DOUBLE CARCASS

Top Tips before you start!
1. Please check that all parts are present before you start the assembly of your furniture,
as once assembled, the furniture is exempt from our home approval policy.
2. For ease and speed of assembly, we recommend that before you commence each step
of the assembly, that you identify all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people (as indicated
on page 1) to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the area in which
they will be placed in use, to avoid moving the product unnecessarily once assembled.
5. For the protection of your furniture, particularly items of high gloss finish, we recommend
that the product is placed on aprotected surface during assembly to prevent any damage.
6. During assembly please take care not to over-tighten any fittings, as this may damage
the product .
Care and Maintenance of your Furniture
Please periodically check all fittings and re-tighten as necessary.
Please do not jump on your furniture.
To clean your item, please use adamp cloth and wipe clean.
Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to
warp or finishes to de-laminate.
DESCRIPTION:
Assembly
Instruction
5 of 12 P5--MKK2
855089 LOFT DOUBLE CARCASS

SCREW IN CAM SCREWS
ONLY DOWN TO FIRST RING.
FLUSH
WITH
PANEL
1
PRESS PANELS TOGETHER ALIGNING
DOWEL WITH HOLES, CAM SCREWS WITH LOCKS.
3
TO SECURE PANELS,
TURN CAM LOCKS 1/2 TURN CLOCKWISE.
4
CAM SHOWN IN
LOCKED POSITION.
++
++
PRESS IN CAM LOCKS. ARROW ON CAM
LOCK MUST FACE HOLE IN PANEL EDGE.
DO NOT INSERT DOWELS
IN CAM SCREW / LOCK HOLES.
2
++
++
DESCRIPTION:
Assembly
Instruction
6 of 12 P5--MKK2
855089 LOFT DOUBLE CARCASS

1
DESCRIPTION:
Assembly
Instruction
7 of 12
2
P5--MKK2
1
++
++
++
++
2
CEE1
C
HINGES PLATE “E” FOR FIXING DOORS
ARE INCLUDED WITH THE DOORS.
front
E
E1
8x 3x 6x
3
A
B
++
855089 LOFT DOUBLE CARCASS
1x
D
1x D1
D
D1
7x
A
++
4x
B
A
front
2
2
1
A

DESCRIPTION:
Assembly
Instruction
8 of 12
3
4
P5--MKK2
A
B
++
++
++
1/2 TURN
CLOCKWISE.
++
++
1
++
++
++
++
5
2
++
++
3
++
++
++
4
4
++
++
++
++
++
855089 LOFT DOUBLE CARCASS
4
5
++
++
++
++
++
++
++
++
front
front
X2
12x
A
++
12x
B

DESCRIPTION:
Assembly
Instruction
9 of 12
5
6
P5--MKK2
C
7
855089 LOFT DOUBLE CARCASS
1
++
2
3
++
++
++
4
4
++
++
++
++
++
5
++
++
++
++
6
C
8x
1x
D
1x
D1
D
D1
EE1
3x 6x
front
E1
E
HINGES PLATE “E” FOR FIXING DOORS
ARE INCLUDED WITH THE DOORS.

1
++
2
++
++
++
4
4
++
++
++
++
++
5
++
++
++
++
6
9
DESCRIPTION:
Assembly
Instruction
10 of 12
7
8
++
++
1/2 TURN
CLOCKWISE.
P5--MKK2
7
++
++
++
oo
90
q
F
6
1118,5mm
1403,5mm
855089 LOFT DOUBLE CARCASS
++
G
18x
F
8x
G
++
++

DESCRIPTION:
Assembly
Instruction
9
11 of 12 P5--MKK2
K
J
H
1x
1x 2x
12x
Wall fixings are not supplied with this product as different wall materials require different
types of fixing devices( such as Rawl plugs used on brick work).You must use fixing
devices suitable for the type of wall you intend to mount this product to.
Please ensure that the head of any screw used has a diameter greater than the diameter
of the mounting hole on the product and that the fixing is safe and secure before use.
*
WHEN CARCASS IS ASSEMBLED PLEASE REFER TO FURTHER
INSTRUCTIONS INCLUDED WITH THE DOORS
I
++
++
I
I
855089 LOFT DOUBLE CARCASS
STEP 1
NOT SUPPLIED -
*
STEP 2
J
J
K
H

DESCRIPTION:
Assembly
Instruction
12 of 12
10
P5--MKK2
a)Side adjustment:
Loosen fixing screw “A”,adjust gap with screw “B” and
retighten screw “A”.
b)Depth adjustment:
Loosen fixing screw “A”, push hinge arm forwards or
backwards, re-tighten screw “A” ,fix screw “B” with a 1/4-turn
in clock-wise direction.
c) Height adjustment:
Loosen screw “C”, adjust height, re-tighten screw “C”.
AA
C
a) b) c)
BC
Hinges Adjustment Facilities
855089 LOFT DOUBLE CARCASS