Next HARTFORD 865183 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: [phone]
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching
or damage.
• Do not put hot dishes directly on the surfaces of the item.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.
• Made in China.
• A minimum of 2 persons is required to assemble this product.
• Do not rub or scrub the surface when cleaning.
• For general cleaning, periodically dust with a soft cloth.
CARE INSTRUCTIONS
• Natural features ensure that each piece is individual. Every effort is made to ensure colour continuity between
pieces, however this is a natural product, slight colour variations and natural grain markings may occur.
• Made from Pine with NC lacquer finish.
• We recommend that the packaging is used to protect the surfaces during assembly.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
PRODUCT INFORMATION
• Carefully check that you have all parts before beginning assembly.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
• Keep fittings out of children's reach and keep children well away from the construction area.
865183 HARTFORD COFFEE TABLE
Page 1 of 5

FITTINGS
PARTS
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
Page 2 of 5

1. Insert 2 x wood dowel E to rail (1)
2. Insert 3 x wood dowel E to 2 x slash rails (2)
3. Insert 2 x wood dowel E and insert 1 x cambolt A to
2 x foot units (3) and tighten with a screwdriver.
STEP ONE
Page 3 of 5

1. Attach 2 x foot units (3) to rail (1).
2. Insert bolt nut B & screw nut C to rail B and tighten
with a screwdriver.
1. Attach 2 x slash rails (2) to rail (1)
STEP TWO
STEP THREE
Page 4 of 5

1. Attach top panel (4) to assembled unit and secured
by 8 x screws F tighten with Allen key G
2. Insert 2 x screws D through slash rail (2) and
tighten with screwdriver.
STEP FOUR
Next Retail Ltd, Desford Road, Enderby, Leicester, LE19 4AT
Page 5 of 5