Next SOPHIE CABIN STATION 889951 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings plase contact Customer
Services Tel: [phone]
• We recommend that the packaging is used to protect the surfaces during assembly.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
PRODUCT INFORMATION
• Made in China.
• For general cleaning, periodically dust with a soft cloth.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.
• A minimum of 2 persons is required to assemble this product.
•Made from MDF with a painted finish.
CARE INSTRUCTIONS
• Not suitable for use in bathrooms.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or warping.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or
damage.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be
faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
FITTINGS
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Do not rub or scrub the surface when cleaning.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• Do not put hot dishes directly on the surfaces of the item.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
889951 SOPHIE CABIN STATION - CUPBOARD
Page 1 of 5

1. Insert 4 x cambolts (A) into the divider panel 8-R and
tighten with a screwdriver.
2. Attach 2 x shelf panels 9 to divider panel 8-R.
3. Insert 4 x camlocks (B) into 2 x shelf panels 9.Ensure
the arrow indicator is pointing towards the panel edge
before tightening with a screwdriver.
1. Insert 4 x cambolts (A) into the divider panel 8-L and
tighten with a screwdivider.
2. Attach side panel 8-L to the assembled unit.
3. Insert 4 x camlocks (B) into 2 x shelf panels 9.Ensure
the arrow indicator is pointing towards the panel edge
before tightening using allen key ( R ).
4. Attach 2 x hanging rail supports (E) to divider panels 8
(both L&R) with 4 x screws (F) and tighten.
PARTS
STEP TWO
STEP ONE
Page 2 of 5

1. Insert 8 x wooden dowels (C) into bottom frame 7.
2. Attach side panesl 2 (both L&R) and divider panels 8
(both L&R) with 8 x screws (L) and tighten with a
screwdriver.
3 Attach 2 x hanging rail supports (E) to side panels 2
(both L&R) with 4 x screws (F) and tighten.
1. Insert 8 x cambolts (A) and 8 x wooden dowels (C) to
top panel 1.
2. Attach top panel 1 to the assembled unit.
3. Insert 8 x camlocks (B) into side panels 2 (both L&R)
and divider panels 8 (both L&R). Ensure the arrow
indicator is pointing towards the panel edge before
tightening with a screwdriver.
1. Attach 2 x back panels 4 and back panel 5 to the
assembled with 26 x screws (D) and tighten.
STEP THREE
STEP FOUR
STEP FIVE
Page 3 of 5

1. Attach 2 x hinges (G) to door panel 3 with 4 x screws
(F) and tighten.
2. Attach 1 x handle (J) to door panel 3 with 1 x bolt (H)
and tighten.
3. Attahch 2 x rubber stoppers (K) to door panel.
4. Repeat step 1 to 3 for another 1 piece door panel.
1. Attach 2 x door panels 3 to side panels 2 (both L&R)
with 8 x screws (F) and tighten.
2. Insert 2 x aluminum rails 6 into hanging rail supports
E.
Note: The gaps between the door and frame can be
changed by making adjustments to the hinges with a
screwdriver. Refer to adjustment diagrams.
Laterally (Side to Side)
Front to back
Vertically ( up and down)
Position as shown
STEP SEVEN
STEP SIX
STEP EIGHT
Page 4 of 5

Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP NINE
Page 5 of 5