SHANGRI-LA RIO SLRIOSIDBOA User manual

RIO SIDEBOARD
SLRIOSIDBOA & SLRIOSIDBWA

Parts list
NO
SIZE
CARTON NO.
NO
SIZE
CARTON NO.
1
600x396x16 (x2)
2-1
8
1768x396x5 (x1)
2-2
2
1768x379x16 (x1)
2-2
9
642x382x16 (x2)
2-2
3
1768x395x16 (x1)
2-2
10
452x382x16 (x1)
2-2
4
557x379x16 (x1)
2-1
11
600x197x16 (x1)
2-1
5
557x379x16 (x1)
2-1
12
600x197x16 (x1)
2-1
6
1768x98x16 (x1)
2-2
13
600x466x16 (x2)
2-1
7
1768x98x16 (x1)
2-2
14
600x466x16 (x1)
2-1
COMPONENTS

Hardware
ACam Bolt (x31)
B Cam Connector (x31)
CDowel (x28)
DM7x50mm Bolt (x7)
EShelf Support (x12)
FM6x25 Screw (x2)
GAllen Key
H M6x30 (x11)
I M6x16 (x2)
J Bent Hinge (x2)
K Flat Hinge (x4)
Note:
This product includes two different types of hinges. Ensure the correct ones are
used during assembly.

Step 1:
Attach the two legs (1) &(2) to the centre support (3) using the four M6x30 Screws (H).
E Allen Key
HM6x30 (x4)
ASSEMBLY

Step 2:
Attach the centre leg (4) to the centre support (3) using the two M6x16 Screws (I).
E Allen Key
IM6x16 (x2)

Step 3:
Insert three Cam Bolts (A) into part (3) in the locations shown below.
A Cam Bolt (x3)

Step 4:
• Insert three Cam Connectors (B) into all the holes adjacent to the corresponding Cam
Bolts.
Note: Ensure the arrow on the Cam Connector (B) is facing the direction of the hole.
• Attach parts (3) &(7) together by screwing the Cam Connectors (B) clockwise.
BCam Connector (x3)

Step 5:
Insert eight Cam Bolts (A) and eight Dowels (C) into parts (2) & (3) in the locations shown
below.
A Cam Bolt (x8)
CDowel (x8)

Step 6:
• Insert eight Cam Connectors (B) into all the holes adjacent to the corresponding Cam
Bolts.
Note: Ensure the arrow on the Cam Connector (B) is facing the direction of the hole.
• Attach parts (2),(3),(4) & (5) together by screwing the Cam Connectors (B) clockwise.
BCam Connector (x8)

Step 6:
Insert 12 Cam Bolts (A) and 12 Dowels (C) into parts (1L)& (1R)in the locations shown below.
A Cam Bolt (x12)
CDowel (x12)

Step 7:
• Insert 12 Cam Connectors (B) into all the holes adjacent to the corresponding Cam
Bolts.
Note: Ensure the arrow on the Cam Connector (B) is facing the direction of the hole.
• Attach parts (1L), (1R),(6) & (8) to the assembled frame by screwing the Cam
Connectors (B) clockwise.
BCam Connector (x12)

Step 8:
• Secure the two Flat Hinges (K) to parts (11)& (13) using the included hinge fasteners.
IMPORTANT:Ensure only the Flat Hinges (K) are used in this step. The Bent Hinges (J)
will not fit.
• Repeat with parts (12)and (14).
K Flat Hinge (x4)

Step 9:
• Insert eight Cam Bolts (A) and eight Dowels (C) into parts (11)& (12)in the locations
shown below.
• Insert eight Cam Connectors (B) into all the holes adjacent to the corresponding Cam
Bolt (A).
Note: Ensure the arrow on the Cam Connector (B) is facing the direction of the hole.
• Secure parts (11)& (12)to the assembled frame by screwing the Cam Connectors (B)
clockwise.
ACam Bolt (x8)
BCam Connector (x8)
CDowel (x8)

Step 10:
Secure the legs to the underside of the sideboard using the seven M6x30 Hex Screws (H).
H M6x30mm Hex Screw (x7)

Step 11:
• Insert the 12 Shelf Supports (E) in the locations shown below.
• Place the three shelves, parts (9) & (10) inside the sideboard in the locations shown
below.
EShelf Support (x12)

Step 12:
Secure the legs in place using the two M6x25 Screws (F) from inside the bedside table.
FM6x25 Screw (x2)

Step 13:
Insert the seven M7x50 Screws (D) in the rear of the sideboard.
DM7x50mm Screw (x7)

Step 14:
Secure part (13) to the sideboard assembly using the two Bent Hinges (J) and the included
hinge fasteners.
JBent Hinges (x2)

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com