Wenger Ensemble Parts list manual

Assembly and Operation Instructions
Ensemble Stool
©Wenger Corporation 2016 Printed in China 03/16 Part #104D002-02
Wenger Corporation,555ParkDrive,P.O.Box448,Owatonna,Minnesota55060-0448
Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: [phone] • www.wengercorp.com
Contents
Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . .2
General ......................................2
Manufacturer ..................................2
Intended Use..................................2
Warranty .....................................2
PartsList(WoodSeatModel) . . . . . . . . . . . . . . . . . . . . . . . . .3
PartsList(Upholstered&PolyurethaneSeatModels) . . . . . .4
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Note: Please read and understand these instructions before starting the assembly.
Note: Examinethefollowingpages.Ifyouneedadditionalinformation,contactthe
Wenger Corporation using the information below.
Standard
Ensemble Stool
with Wood Seat
Standard
Ensemble Stool
with Polyurethane Seat
Premier
Ensemble Stool
with Padded and
Upholstered Seat

2
Important User Information
General
Copyright©2016 by Wenger Corporation
Allrightsreserved.Nopartofthecontentsofthismanualmaybereproduced,copied,ortransmitted
in any form or by any means including graphic, electronic, or mechanical methods or photocopying,
recording,orinformationstorageandretrievalsystemswithoutthewrittenpermissionofthepublisher,
unless it is for the purchaser’s personal use.
Printed and bound in the United States of America.
The information in this manual is subject to change without notice and does not represent a commitment
on the part of Wenger Corporation. Wenger Corporation does not assume any responsibility for any
errors that may appear in this manual.
InnoeventwillWengerCorporationbeliablefortechnicaloreditorialomissionsmadeherein,norfor
direct, indirect, special, incidental, or consequential damages resulting from the use or defect of this
manual.
Theinformationinthisdocumentisnotintendedtocoverallpossibleconditionsandsituations
thatmightoccur.Theendusermustexercisecautionandcommonsensewhenassemblingor
installing Wenger Corporation products. If any questions or problems arise, call Wenger Corporation
at 1-800-887-7145.
Manufacturer
The Ensemble Stool is manufactured for:
Wenger Corporation
 555ParkDrive
 Owatonna,MN55060
(800) 4WENGER (493-6437) • 1 [phone]
www.wengercorp.com
Intended Use
· This product is intended for indoor use in normal ambient temperature and humidity conditions —
 itmustnotbeexposedtoprolongedoutsideweatherconditions.
· This product is intended to be assembled and used only as described in these instructions.
Warranty
Thisproductisguaranteedfreeofdefectsinmaterialsandworkmanshipforvefullyearsfrom
dateofshipment.Afullwarrantystatementisavailableuponrequest.

3
Part List (Wood Seat Model)
Item Qty Description Item Qty Description
1 1 Seat (Wood) 6 4 SplitRingLockWasher,M6
2 4 Spacer 7 4 MachineScrew,6x15
3 1 Primary Leg Assembly 8 5 WoodScrew,6x35
*For use on Wood Seat Models only
4 1 Secondary Leg Assembly 9 4 MachineScrew,6x35
*For use on Upholstered or
Polyurethane Seat Models only
5 1 Foot Ring 10 4 Wing Nut
*Quantities may vary, extras can be discarded.
2
3
1
6
5
7
8
4
10

4
Part List (Upholstered & Polyurethane Seat Models)
Item Qty Description Item Qty Description
1 1 Seat (Upholstered or Polyurethane) 6 4 SplitRingLockWasher,M6
2 4 Spacer 7 4 MachineScrew,6x15
3 1 Primary Leg Assembly 8 5 WoodScrew,6x35
*For use on Wood Seat Models only
4 1 Secondary Leg Assembly 9 4 MachineScrew,6x35
*For use on Upholstered or
Polyurethane Seat Models only
5 1 Foot Ring 10 4 Wing Nut
*Quantities may vary, extras can be discarded.
2
3
1
6
5
7
9
1
Upholstered Seat Polyurethane Seat
4
10

5
Assembly
1. Attach the Primary Leg Assembly to the Seat.
a. With the crimped side facing away from the Seat (1), align the Primary Leg Assembly (3)
and two Spacers (2) with one set of pilot holes in the bottom of the Seat.
b. Attach each side to the Seat.
-IfattachingtoaWoodSeat,usetwo6x35WoodScrews(8).
-IfattachingtoaFabricorPolyurethaneSeat,usetwo6x35MachineScrews(9).
Wood Seat Fabric and Polyurethane Seat
Primary Leg
Assembly
(3)
6 x 35
Machine Screw
(9)
Spacer
(2)
Seat
(1)
~ or ~
Primary Leg
Assembly
(3)
6 x 35
Wood Screw
(8)
Spacer
(2)
Seat
(1)
Crimped side
faces away
from seat.
Crimped side
faces away
from seat.

6
Assembly (continued)
2. Attach the Secondary Leg Assembly to the Seat.
a. With the crimped side facing toward from the Seat (1) and straddling the Primary Leg,
align the Secondary Leg Assembly (4) and two Spacers (2) with the remaining set of
pilot holes in the bottom of the Seat.
b. Attach each side to the Seat.
-IfattachingtoaWoodSeat,usethree6x35WoodScrews(8).
-IfattachingtoaFabricorPolyurethaneSeat,usetwo6x35MachineScrews(9).
Secondary
Leg Assembly
(4)
Wood Seat Fabric and Polyurethane Seat
Seat
(1)
~ or ~
Secondary
Leg Assembly
(4)
Seat
(1)
Crimped side
faces toward seat
and straddles
other leg.
Crimped side
faces toward seat
and straddles
other leg.
6 x 35
Wood Screw
(8)
Spacer
(2)
6 x 35
Machine Screw
(9)
Spacer
(2)

7
Assembly (continued)
3. PositiontheFootRing(5)totunderthetabsoftheLegAssemblies.
4 AttachtheFootRingtotheLegAssembliesusingfourM6SplitRingLockWashers(6)and
four6x15MachineScrews(7)fromthebottomasshown.
M6 Split Ring
Lock Washer
(6)
Foot Ring
(5)
Fit the foot ring
under the tabs of
the legs.
6 x 15
Machine Screw
(7)

8
Operation
The height of the Ensemble Stool is adjustable.
1. Unscrew the Wing Nut (10) from each leg.
2. Slide the Inner Leg to adjust the height.
3. Tighten the Wing Nut (10) to secure the new height.
Troubleshooting
During shipping, Foot Glides could become detached causing the Inner Adustable Height Leg to
become stuck inside of the Outer Leg Tube.
If this occurs:
1. Unscrew the Wing Nut (10) from the leg.
2. HoldtheOuterTubeandcarefullystrikethebottomagainstahardsurfacedoortodislodge
the Inner Leg.
KeepthebottomoftheOuterTubeparalleltotheoorwhenstrikingtoavoidbending,causing
the Inner Leg to become trapped inside.
3. TightentheWingNut(10)topreventtheInnerLegfrommovingandpushtheFootGlideback
into the bottom of the Inner Leg until it is fully seated.
4. If the Foot Glide is damaged, a replacement will be necessary.
Wing Nut
(10)
Outer Leg
Tube
Inner Adjustable
Height Leg
Foot Glide