NIIMBOT B1 User manual

Sma Label Printer
Quick Sta Guide
NIIMBOT B1
NIIMBOT is a brand under Wuhan Jingchen Intelligent ldentication Technology Ltd.
© 2022 NIIMBOT. All rights reseed.
Suppo Email : se[email protected]
Ocial Website : www.niimbot.com
Wuhan Jingchen Intelligent ldenticationTechnology Co., Ltd.
Production Address : No. 1, Tianyang Road, Chuanlong Avenue, Hengdian
Street, Huangpi District, Wuhan City, Hubei Province, China

Sma Label Printer *1
USB Type-C Cable *1 Quick Guide *1
Label Paper Roll *1
Package Contents
01
01 · 02
EN

Danger! Beware of shape blade when the paper compament is open.
Press the Open Slide on the left to open the paper compament.
1
Push the paper compament bae to the sides and t the
label paper into the paper compament with the print side
facing down.
2
Open Slide
Print Side
Tear-o Blade
Paper Compament Bae
Fit the label paper into the compament
with the print side facing down.
Installation
02
EN

Slide the paper compament bae inwards to secure the
label paper, pull the rst paper out, make sure it sticks out
of the paper exit.
3
Close the paper compament and long-press the Power
Button to turn the printer on.
4
Paper Exit
Power Button
Indicator Light
EN
03 · 04

EN
Installing App
03
Before using the printer, please install the NIIMBOT app from
Google Play or the App Store.
1
Get the NIIM app for more label designs for homes.
2
Design & Print APP
easy to download and use
NIIM
Design & Print APP
easy to download and use
NIIMBOT
More information available on the NIIMBOT app.
Sign in to NIIMBOT Help Center HardwareMe

EN
Connecting and Printing
04
05 · 06
After connecting, tap on "Current label template" on the
Home tab to enter the label editor.
3
On Home, tap Connect sma label printer. Then select device
model.
2
Notice: If a PIN code is required, input 0000 or 1234.
Images of products, accessories, and the app in this manual are
for illustrative purposes only and may be dierent from actual
products. Products are subject to change without prior notice.
Special Notes
8:30
NIIMBOT Turn on Bluetooth
Open NIIMBOT app and turn on Bluetooth on your phone.
1

Function Operation
Switch on
Switch o
Print histo
Hold down the Power button for three seconds.
Hold down the Power button for three seconds when
the device is on.
Press the Power button once when the device is on.
Print a test page Double-press the Power button when the device is on.
EN
Basic Functions
05

Indicator
Blue
Blue
Green
Green
Blinking
Solid
Blinking
Blinking
Solid
Solid
Status
Hardware upgrading
Standby
Printing
Bluetooth connected
Description
Red
Red
Charging
Paper compament open/
Out of paper/Paper exit error
EN
LED Indicators
06
07 · 08

Product Label Printer Model NIIMBOT B1
Dimensions 132*91.2*61.6mm Weight 293g
Charging Time 3.5 - 4 hours Input
Batte Capacity 1500mAh Thermal printing
5V DC, 1A
Printing Method
Printing
Resolution Printing Width
Connectivity Charge
Transmit Power Operating
Temperature
203dpi 20-48mm
Bluetooth、Type-C USB Type-C
4dBm(Maximum) 5~40℃
EN
Specications
07

Don't disassemble the product
without authorization.
Disassembled products cannot
be returned or exchanged.
Do not wipe the product with
corrosive chemicals or cleaning
agents.
Do not use the product
near places with ammable
products such as gas stations
or fuel depots.
Please read all the instructions and warnings in this manual carefully
before using this product to ensure the proper functioning of the
device and your safety.
Please keep the product and accessories out of the reach of children or
they must be used under the supeision and guidance of a guardian;
Turn o the power immediately when water gets into the product;
Turn o the power immediately in case of any product malfunction;
If you want to use a power adapter, always use one that is safe,
regulato-compliant, and compatible;
Do not disassemble the product to replace the batte. Improper operation
may cause an explosion;
1.
2.
3.
4.
5.
*Warnings
EN
Safety Precautions
08
09 · 10

The batte contains special protection circuit and device, please do not
disassemble the batte without authorization, otherwise it may cause a
sho circuit or leakage. If electrolyte gets into your eyes, ush with water
immediately and seek medical help;
Do not expose the product and the power adapter to high temperature
or high humidity. Do not put them in water, otherwise a sho circuit may
occur and the batte may heat up, smoke, deform, damage, or even explode;
If smoke or smell comes from the product or the power adapter, please
unplug the power adapter immediately and avoid any burns.
6.
7.
8.
Please use NIIMBOT label paper to prevent print quality issues or printhead
damage;
Please stop using the product immediately when the batte cannot provide
enough power;
The product comes with a built-in rechargeable batte. Do not throw it
into re or heat it. Do not charge, use or store it in a hot place, as this may
cause overheating, re or explosion.
1.
2.
3.
*Impoant
EN