NIIMBOT B18 User manual

名称 页数
材质 日期
料号
设计
印刷
尺寸
装订
单位：mm 印刷位移公差±1
2022.08.08
刘楠
说明书-B18-英文-80g双胶纸-70*110mm-V1.0
70mm
110mm
80g双胶纸
16P
70*110mm±1mm
骑马钉 单色印刷
备注:
Suppo Email : se[email protected]
Ocial Website : www.niimbot.net
Wuhan Jingchen Intelligent ldenticationTechnology Co., Ltd.
Production Address : No. 1, Tianyang Road, Chuanlong Avenue, Hengdian
Street, Huangpi District, Wuhan City, Hubei Province
NIIMBOT is a brand under Wuhan Jingchen Intelligent ldentication Technology Ltd.
© 2022 NIIMBOT. All rights reseed.
Sma Label Printer
Quick Sta Guide
NIIMBOT B18

Suppo Email : se[email protected]
Ocial Website : www.niimbot.net
Wuhan Jingchen Intelligent ldenticationTechnology Co., Ltd.
Production Address : No. 1, Tianyang Road, Chuanlong Avenue, Hengdian
Street, Huangpi District, Wuhan City, Hubei Province
NIIMBOT is a brand under Wuhan Jingchen Intelligent ldentication Technology Ltd.
© 2022 NIIMBOT. All rights reseed.
Sma Label Printer
Quick Sta Guide
NIIMBOT B18

Please choose B18-compatible
thermal printing label paper for
printing.
Installation
02
Lift the open clasp upward to open the compament.
1
Fit the label paper inside with the label side facing up.
2
Open Clasp
Invalid if torn
This side faces up.

Thread the paper roll through the paper duct and make sure
the rst label paper sticks out of the tear-o slot.
3
Tauten the thermal transfer ribbon counterclockwise
according to the thermal transfer ribbon label and t it into
the compament with the label side facing down.
4
Tear-o Slot
Paper Duct
This side faces down.
T
h
i
s
s
i
d
e
d
o
w
n
C
o
n
t
r
a
r
o
t
a
t
e
t
o
t
i
g
h
t
e
n
Thermal Transfer Ribbon Label
03 · 04

Snap the clasp down to close the cover.
5

Before using the printer, please install the NIIMBOT app from
Google Play or the App Store.
1
Get the NIIM app for more label designs for homes.
2
Design & Print APP
easy to download and use
NIIM
Design & Print APP
easy to download and use
NIIMBOT
More information available on the NIIMBOT app.
Sign in to NIIMBOT Help Center HardwareMe
Installing App
03
05 · 06

After connecting, tap on "Current label template" on the
Home tab to enter the label editor.
3
On Home, tap Connect sma label printer. Then select device
model.
2
Notice: If a PIN code is required, input 0000 or 1234.
Images of products, accessories, and the app in this manual are
for illustrative purposes only and may be dierent from actual
products. Products are subject to change without prior notice.
Special Notes
8:30NIIMBOTTurn on Bluetooth
Open NIIMBOT app and turn on Bluetooth on your phone.
1
Connecting and Printing
04

Basic Functions
05
Function Operation
Switch on
Switch o
Print histo
Hold down the Power button for three seconds.
Hold down the Power button for three seconds when
the device is on.
Press the Power button once when the device is on.
Print a test page Double-press the Power button when the device is on.
07 · 08

LED Indicators
06
Indicator
Blue
Blue
Blue
Red
Blinking slowly
Blinking fast
Solid
Blinking fast
Solid
Blinking slowly
Status
Standby
Charging
Bluetooth connected
Batte low, standby
Description
Red
Red
Batte low, charging
Batte low, Bluetooth
connected

Specications
07
Product Label Printer Model NIIMBOT B18
Dimensions 135*90*37mm Weight 308g
Charging Time 3 - 3.5 hours Input
Batte Capacity 1200mAh Thermal Transfer
Printing
5V DC, 1A
Printing Method
Printing
Resolution Printing Width
Connectivity Charge
Transmit Power Operating
Temperature
203dpi 12mm
Bluetooth Type-C
4dBm(Maximum) 5℃ - 40℃
09 · 10

Don't disassemble the product
without authorization.
Disassembled products cannot
be returned or exchanged.
Do not wipe the product with
corrosive chemicals or cleaning
agents.
Do not use the product
near places with ammable
products such as gas stations
or fuel depots.
Safety Precautions
08
Please read all the instructions and warnings in this manual carefully
before using this product to ensure the proper functioning of the
device and your safety.
Please keep the product and accessories out of the reach of children or
they must be used under the supeision and guidance of a guardian;
Turn o the power immediately when water gets into the product;
Turn o the power immediately in case of any product malfunction;
If you want to use a power adapter, always use one that is safe,
regulato-compliant, and compatible;
Do not disassemble the product to replace the batte. Improper operation
may cause an explosion;
1.
2.
3.
4.
5.
*Warnings

The batte contains special protection circuit and device, please do not
disassemble the batte without authorization, otherwise it may cause a
sho circuit or leakage. If electrolyte gets into your eyes, ush with water
immediately and seek medical help;
Do not expose the product and the power adapter to high temperature
or high humidity. Do not put them in water, otherwise a sho circuit may
occur and the batte may heat up, smoke, deform, damage, or even explode;
If smoke or smell comes from the product or the power adapter, please
unplug the power adapter immediately and avoid any burns.
6.
7.
8.
11 · 12

FCC Statement
Related Statements
09
This device complies with pa 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful inteerence, and (2) this device must accept
any inteerence received, including inteerence that may cause undesired operation.
Any changes or modications not expressly approved by the pay responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Pa 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful inteerence in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful inteerence to radio communications.
However, there is no guarantee that inteerence will not occur in a paicular installation. If this
equipment does cause harmful inteerence to radio or television reception,which can be
determined by turning the equipment o and on, the user is encouraged to t to correct the
inteerence by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.The device can be
used in poable exposure condition without restriction.

Declaration of conformity
13 · 14
Hereby, Wuhan Jingchen Intelligent Identication Technology Co., Ltd. declares that this device
is in compliance with the essential requirements and other relevant provisions of Radio
Equipment Directive (RED) 2014/53/EU. This product can be used across EU member states. This
device can be used in European Union.
Hereby, [Wuhan Jingchen Intelligent Identication Technology Co., Ltd.] declares that the radio
equipment type [NIIMBOT B18] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address:http://www.niimbot.com.

Package Contents
01
Installation
02
Installing App
03
Connecting and Printing
04
Basic Functions
05
LED Indicators
06
Specications
07
07
06
03
02
CONTENTS
08
09
10
Safety Precautions
08
Related statements
09
11
13

Package Contents
01
Sma Label Printer *1
USB Type-C Cable *1 Quick Sta Guide *1
Label Paper Roll *1
01 · 02