NIIMBOT B3S User manual

NIIMBOT is a brand under Wuhan Jingchen Intelligent ldentication Technology Ltd.
© 2022 NIIMBOT. All rights reseed.
Sma Label Printer
Quick Sta Guide
NIIMBOT B3S
Wuhan Jingchen Intelligent ldenticationTechnology Co., Ltd.
Suppo Email : se[email protected]
Ocial Website : www.niimbot.net
Oce Address :Creative Workshop No. 5, Creative World,Yezhihu West
Road,Hondshan District,Wuhan,China
Production Address : No. 1 Tianyang Road, Chuanlong Avenue, Hengdian
Street, Huangpi District, Wuhan, China

Package Contents
01
02
Basic Functions and Settings
03
Installing App
04
Connecting and Printing
05
Basic Functions
06
Specications
07
10
06
03
02
CONTENTS
11
12
13
Safety Precautions
08
Related statements
09
14
16
Installation

Package Contents
01
Sma Label Printer *1
USB Type-C Cable *1 Quick Sta Guide *1
Label Paper Roll *1
01 · 02

Installation
02
Tear o the seal on the label paper.
1
Press down the Paper Compament Open Button to open the
paper compament.
2
Paper Compament
Open Button

Toggle the spindle to the “open” position as the arrow sign
indicates.
3
Slide the paper compament bae to the correct scale according
to the width of the paper roll and toggle the spindle towards
the blade.
4
After adjusting the paper compament scale, the spindle must
be securely toggled to prevent any misaligned printing.
Spindle
Paper Compament Bae
Paper Blade
Print Head
Paper Compament Scale
03 · 04

Distinguish the sides of the paper roll. It will not print if the
paper roll is reversed.
Fit the paper roll into the paper compament and make sure
the print side faces the print head. Pull a ceain length of paper
out from the paper exit and then close the paper compament
cover.
5
Print Side

Basic Functions and Settings
03
1. Power On
When the device is powered o (screen unlit), long-press the
Power/Setting button for 2 seconds to power on the device and
the monitor screen will display the home inteace.
2. Feeding Paper
Press the Paper Exit/OK button and the device will roll out one
stretch of paper.
3. Choosing Paper Types: Dierent Types of Paper Displayed
Accordingly
Device ID
B3S-AB09000001
Crack Label: The seam of paper should be aligned to the cutting
opening, tear the paper to have it cut by the blade.
Black Label: Tear the paper through the tear line without
using the blade.
Cont Labe: A full sheet of print paper and use the blade to
have it cut at any position.
TRN Label: A type of transparent cont label; the seam of paper
should be aligned to the cutting opening, tear the paper to
have it cut by the blade.
05 · 06

4. Lack of Paper/Open Compament
If the monitor screen displays information of Cover Open/Lack
of Paper, the device will not respond to printing commands.
5. Low Batte
When the device is out of power, the monitor screen will display
“The batte level is low. Please charge!” and will automatically
power o in 10 seconds.
6. Bluetooth Connection
When the Bluetooth is connected, the Bluetooth icon will be
displayed in inveed white.
Cover Open! Lack of Paper!
The batte level is low.
Please charge!
Device ID
B3S-AB09000001

7. Power Indicator
When the device is connected with a power adapter, the power
icon will be displayed as follows.
8. Settings
Press Power/Settings button at the home inteace to enter the
settings inteace; continue to press the Power/Settings button
to switch among 5 dierent setting inteaces, including “Density”/
”Type of Paper”/”Shutdown Time”/”Language”/”Self-check page”.
Press Paper Exit/OK button at the setting inteace.
1) Printing density includes 5 levels (1/2/3/4/5).
2) Type of paper includes four types (crack label/black label/cont
label/TRN label).
3) The shutdown time when no operation is peormed on the
device is set in 4 levels (15 minutes/30 minutes/60minutes/
never).
Device ID
B3S-AB09000001
Density
< 3 >
Type Of Paper
< crack label >
07 · 08

4) Language is available in 2 types (Chinese/English).
5) Press the “Paper Exit/OK” button to print the self-check page.
The self-check page will include information of printer model,
rmware version, hardware version, device serial number, etc.
9. Printing
During the printing process, the monitor screen will display
“Printing”, and will automatically return to the home inteace
when the printing is completed. You can pause the printing with
the phone APP or press the “Paper Exit/OK” button.
Shutdown Time
< 60 minutes >
Language
< English >
Self-check Page?
Printing

Installing App
04
Before using the printer, please install the NIIMBOT app from
Google Play or the App Store.
1
Get the NIIM app for more label designs for homes.
2
Design & Print APP
easy to download and use
NIIM
Design & Print APP
easy to download and use
NIIMBOT
More information available on the NIIMBOT app.
Sign in to NIIMBOT Help Center HardwareMe
09 · 10

After connecting, tap on "Current label template" on the
Home tab to enter the label editor.
3
On Home, tap Connect sma label printer. Then select device
model.
2
Notice: If a PIN code is required, input 0000 or 1234.
Connecting and Printing
05
Images of products, accessories, and the app in this manual are
for illustrative purposes only and may be dierent from actual
products. Products are subject to change without prior notice.
Special Notes
8:30
NIIMBOT Turn on Bluetooth
Open NIIMBOT app and turn on Bluetooth on your phone.
1

Basic Functions
06
Function Operation
Switch on
Switch o
Print histo
Hold down the Power button for three seconds.
Hold down the Power button for three seconds when
the device is on.
Press the right button while the device is powered on.
Print a test page
While the device is powered on, press the left button to
switch to “Print Self-check Page” inteace; press the right
button to print the self-check page.
11 · 12

Specications
07
Product Label Printer Model NIIMBOT B3S
Dimensions 115.5*109.67*58.58mm Weight 317g
Charging Time 5 - 6 hours Input
Batte
Capacity 2000mAh Thermal printing
5V DC, 1A
Printing
Method
Printing
Resolution
Printing
Width
Connectivity Charge
Transmit Power Operating
Temperature
203dpi 25-75mm
Bluetooth,Type-C Type-C
4dBm(Maximum) 5℃ - 40℃

13 · 14
Don't disassemble the product
without authorization.
Disassembled products cannot
be returned or exchanged.
Do not wipe the product with
corrosive chemicals or cleaning
agents.
Do not use the product
near places with ammable
products such as gas stations
or fuel depots.
Safety Precautions
08
Please read all the instructions and warnings in this manual carefully
before using this product to ensure the proper functioning of the
device and your safety.
Please keep the product and accessories out of the reach of children or
they must be used under the supeision and guidance of a guardian;
Turn o the power immediately when water gets into the product;
Turn o the power immediately in case of any product malfunction;
If you want to use a power adapter, always use one that is safe,
regulato-compliant, and compatible;
Do not disassemble the product to replace the batte. Improper operation
may cause an explosion;
1.
2.
3.
4.
5.
*Warnings

The batte contains special protection circuit and device, please do not
disassemble the batte without authorization, otherwise it may cause a
sho circuit or leakage. If electrolyte gets into your eyes, ush with water
immediately and seek medical help;
Do not expose the product and the power adapter to high temperature
or high humidity. Do not put them in water, otherwise a sho circuit may
occur and the batte may heat up, smoke, deform, damage, or even explode;
If smoke or smell comes from the product or the power adapter, please
unplug the power adapter immediately and avoid any burns.
6.
7.
8.

FCC Statement
This device complies with pa 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful inteerence,
and (2) this device must accept any inteerence received, including inteerence
that may cause undesired operation.
Any changes or modications not expressly approved by the pay responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Pa 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful inteerence
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful inteerence to radio communications.
However, there is no guarantee that inteerence will not occur in a paicular
installation. If this equipment does cause harmful inteerence to radio or
television reception,which can be determined by turning the equipment o
and on, the user is encouraged to t to correct the inteerence by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
Related Statements
09
15 · 16

Declaration of conformity
Hereby, Wuhan Jingchen Intelligent Identication Technology Co., Ltd. declares
that this device is in compliance with the essential requirements and other
relevant provisions of Radio Equipment Directive (RED) 2014/53/EU. This
product can be used across EU member states. This device can be used in
European Union.
Hereby, [Wuhan Jingchen Intelligent Identication Technology Co., Ltd.]
declares that the radio equipment type [NIIMBOT D11] is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address:http://www.niimbot.com.
Canadian Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause inteerence.
(2) This device must accept any inteerence, including inteerence that may
cause undesired operation of the device.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.The
device can be used in poable exposure condition without restriction.

17 · 18
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d' en compromettre le fonctionnement.