Nikon WT-6 User manual

5.15-5.35GHz band is restrictedto indoor operations only.
Use of 5.15-5.35GHz band

WT-6A(N1526) has been tested and found to

5.15-5.35GHz band is restricted to indoor operations only.
Use of 5.15-5.35GHz band
This device complies with Industry Canada s licence-exempt RSSs.
Use of 5.25-5.35GHz,5.65-5.85GHz band
High-power radars are allocated as primary users (i.e. priority users) of the bands
5250-5350MHz and 5650-5850MHzand that these radars couldcause interference
and/or damageto LE-LAN devices.
Compliance with IC requirement RSS-210 A9.4.4
WT-6A(N1526)has been testedand found to
Data transmission is always initiated by software, which is the passed down through
the MAC, through the digital and analog baseband, and finally to the RF chip.
Several special packets are initiated by the MAC. These are the only ways the digital
baseband portion will turn on the RF transmitter, which it then turns off at the end
of the packet. Therefore, the transmitter will be on only while one of the aforementioned
packets is being transmitted.
In other words, this device automatically discontinue transmission in case of either
absence of information to transmit or operational failure.