Ninja STORM QB751Q Series User manual

STORM™
OWNER’S GUIDE
QB751Q Series
®
ninjakitchen.com
1 877 646-5288

11-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR NINJA®STORM™.
POLARIZED PLUG
WARNING: To reduce the risk of electric
shock, this appliance has a polarized plug
(one blade is wider than the other). This plug
will fit into a polarized outlet only one way.
If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. DO NOT modify the plug in any
way.
WARNING: Extension cords are
not recommended for use with this product.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1WARNING: Remove utensils prior to
processing. Failure to remove may cause
the jar to be damaged or to shatter which
may cause personal injury.
2WARNING: 4-Blade Assembly is sharp,
not locked in place and removable, handle
with care. When handling the 4-Blade
Assembly, always hold it by the shaft. Failure
to do so will result in a risk of laceration.
3 WARNING: 4-Blade Assembly is sharp
and not locked in place. Remove the
splashguard and carefully remove the
4-Blade Assembly first, holding it by the
shaft before pouring. Failure to do so will
result in a risk of laceration.
4WARNING: 4-Blade Assembly is sharp
and not locked in place. If using the pour
spout, ensure that the splashguard is fully
on the pitcher. Failure to do so will result
in a risk of laceration.
5CAUTION: If pouring with the lid or
splashguard removed, ALWAYS remove
the 4-Blade Assembly first. Failure to do
so will result in a risk of laceration.
6 CAUTION: Do not blend hot liquids,
doing so may cause excessive pressure
build-up, resulting in risk of the user
being burned.
7To protect against electrical shock, do not
submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.
8 DO NOT allow the appliance to be used by
children. Close attention is necessary when
used near children. This is not a toy.

2www.ninjakitchen.com
21 DO NOT use pitcher if it is cracked or chipped.
22 To reduce the risk of injury, NEVER operate
the appliance without the splashguard in
place; DO NOT try to defeat the interlock
mechanism; make sure that the cutting blades
are properly assembled before operating the
appliance.
23 DO NOT operate this appliance on or near any
hot surfaces (such as gas or electric burner or
in a heated oven).
24 The use of accessory attachments, including
canning jars not recommended by the
manufacturer may cause fire, electrical shock
or risk of personal injury.
25 DO NOT remove the Master Pod before the
Ninja 4-Blades Assembly has stopped turning.
26 DO NOT overfill.
27 DO NOT operate the appliance empty.
28 DO NOT try to defeat the interlock mechanism.
Make sure that the 40 oz. 4-Blade Assembly
is properly inserted before operating the
appliance.
29 Immediately release the On/Off pulse button
on the Master Pod in the event that the
appliance malfunctions during use.
30 DO NOT operate the appliance for more than
15 seconds.
31 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
32 If the appliance overheats, a thermal switch
will become activated and shut off the motor.
To reset, unplug the appliance and let it cool
down for approximately 10 minutes before
using again.
9Never leave an appliance unattended when
inuse.
10 Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
11 Remove the Master Pod from the appliance
and unplug the power cord from the electrical
outlet when not in use, before assembling
or disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the
electrical outlet. Never pull from the power
cord.
12 DO NOT abuse the power cord. Never carry
the Master Pod by the power cord or yank it to
disconnect from electrical outlet; instead grasp
the plug and pull to disconnect.
13 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged
in any manner. This appliance has no
serviceable parts. Return the appliance to
SharkNinja Operating LLC for examination,
repair or adjustment.
14 DO NOT let the power cord hang over the edge
of table or counter or touch hot surfaces such
as the stove.
15 Always use appliance on a dry, level surface.
16 Keep hands, hair, clothing, as well as utensils
out of container while processing to reduce the
risk of severe injury to persons or damage to
the appliance. A scraper may be used but only
when the appliance is not running.
17 Avoid contact with moving parts.
18 DO NOT attempt to sharpen blades.
19 DO NOT use the appliance if blade assemblies
are bent or damaged.
20 DO NOT expose pitcher to extreme
temperature changes.
SAVE THESE INSTRUCTIONS

31-877-646-5288
THIS MANUAL COVERS MODELS:
QB751QBK 30
QB751QR 30
QB751QPR 30
QB751QBL 30
QB751QY 30
QB751QO 30
QB751QL 30
QB751QTQ 30
QB751QPK 30
QB751QE 30
QB751QCN 30
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 450 Watts
Pitcher Capacity: 40 oz. (5 cups, 1.25 L)

4www.ninjakitchen.com
Contents
Thank you for
purchasing the
Ninja®Storm™.
Getting Started ...................................................................................................................5
Before First Use ..................................................................................................................7
Assembly and Use of the Pitcher..........................................................................................7
Cleaning and Maintenance ..................................................................................................9
Troubleshooting Guide.........................................................................................................9
Warranty ..........................................................................................................................10

51-877-646-5288
Getting Started
d40 oz. 4-Blade Assembly
e40 oz. Pitcher with Non-Slip Base
f Power Cord (not shown)
aMaster Pod
bSplashguard
cPitcher Storage Lid
c
b
e
a
d

6www.ninjakitchen.com
The Ninja®Storm™is an indispensable kitchen tool that is perfect for blending, whipping, ice crushing and food processing
- all in the conveniently sized pitcher! For best results, be sure to carefully read all the instructions contained in the manual
before using this appliance.

71-877-646-5288
1 Review warning and caution statements at the top of
page 8 before proceeding to number 2.
2Place the pitcher on a clean, dry, level surface.
3Add the ingredients to be processed into the pitcher.
4Holding the 40 oz. 4-Blade Assembly by the shaft,
place it onto the spindle pin inside the pitcher.
(Fig. 1, a)
WARNING: Place 40 oz. 4-Blade Assembly inside
the pitcher carefully as blades are sharp.
WARNING: DO NOT try to place the 40 oz. 4-Blade
Assembly onto the Master Pod and then into the
pitcher. (Fig. 1, b)
IMPORTANT: Never add ingredients into the pitcher
before placing the blades in first.
5Place the pitcher splashguard onto the top of the
pitcher. (Fig. 1, c)
PLEASE KEEP THESE IMPORTANT SAFEGUARDS
IN MIND WHEN USING THE APPLIANCE:
IMPORTANT: Make sure that the Master Pod is
plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the 40 oz. 4-Blade
Assembly in first.
IMPORTANT: Attachments are not interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the splashguard on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it may
result in damage to the accessories.
Before First Use
Fig. 1
Shaft
a
c
b
CAUTION: If
pouring with the
lid or splashguard
removed, ALWAYS
remove the 40 oz.
4-Blade Assembly
first. Failure to do
so will result in a
risk of laceration.
CAUTION: Do not immerse the Master Pod
into water or any other liquid.
1Remove all packaging material and labels from the appliance.
Separate/remove all parts from each other.
2Wash the lid, splashguard, pitcher, and 40 oz. 4-Blade
Assembly in warm, soapy water. When washing the
blade assembly, use a dish-washing utensil with a
handle to avoid direct hand contact with blades.
WARNING: Handle the 40 oz. 4-Blade Assembly
with care when washing, as the blades are
sharp.
3Handle the 40 oz. 4-Blade Assembly with care to avoid
contact with sharp edges. Rinse and air dry thoroughly.
4The pitcher, lid, splashguard, and 40 oz. 4-Blade
Assembly are all dishwasher safe. It is recommended
that the lid, spashguard and blade assembly be placed
on the top rack. Ensure that the blade assembly
is removed from the pitcher before placing in the
dishwasher.
5Wipe the motor base clean with a damp cloth.
Assembly and Use of the Pitcher
WARNING: 40 oz.
4-Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure that the
splashguard is fully on
the pitcher. Failure to
do so will result in a
risk of laceration.

8www.ninjakitchen.com
Fig. 3
Fig. 2
6Place the Master Pod on top of the splashguard making
sure that it is securely in place. (Fig. 2)
7To start the appliance, plug the power cord into the
electrical outlet, securely hold the Master Pod while
operating and press on the On/Off pulse button located
on the top of the Master Pod. (Fig. 3)
8 Hold the pitcher firmly while depressing the On/Off
pulse button to ensure the unit stays in place.
NOTE: DO NOT operate the appliance continuously for
more than 15 seconds at a time.
9To stop the appliance, remove your fingers from the
On/Off pulse button.
10 In order to obtain a better quality of chopping, operate
the appliance by using the “pulse” method.
11 Make sure that the 40 oz. 4-Blade Assembly has
stopped completely before removing the Master Pod.
12 If the ingredients stick to the side of the pitcher,
stop the appliance, remove the Master Pod and the
splashguard. Use a spatula to dislodge the pieces and
then replace the splashguard and the Master Pod.
Continue processing.
13 Depending on the consistency of the contents, use the
pour spout to empty liquid contents.
14 For thicker consistencies, first remove splashguard
and 40 oz. 4-Blade Assembly (by its shaft), then empty
contents of the pitcher.
HINTS & TIPS FOR USING YOUR NINJA®
• The 40 oz. 4-Blade Assembly can be used for chopping
meat, fish, vegetables, cheese etc.
• For mincing, chopping and pureeing, increase the
length of pulses.
• For coarse chopping, use short, quick pulses and
monitor food texture.
• Pre-cut larger pieces to make them fit into the pitcher.
When chopping hard foods (e.g. meat, cheese) cut into
1-inch cubes.
• To crush ice into snow, start by using short pulses to
break up large chunks. Continue until snow is achieved.
WARNING: Handle the 40 oz. 4-Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: DO NOT try to place the 40 oz. 4-Blade Assembly onto the Master Pod and then into the pitcher.
WARNING: DO NOT attempt to operate the appliance without the safety splashguard in place.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the Master Pod is plugged in for use.

91-877-646-5288
Cleaning and Maintenance
HOW TO CLEAN
CAUTION: Remove the Master Pod from the appliance and unplug the power cord from the electrical outlet before
assembling or disassembling parts and before cleaning.
CAUTION: DO NOT immerse the Master Pod into water or any other liquid. Clean with a damp sponge or cloth and wipe
dry.
1Separate/remove all parts from each other.
2Hand Washing: Wash the lid, splashguard, pitcher, and Ninja 4-Blade assembly in warm, soapy water. When washing the
40 oz. 4-Blade Assembly, use a dish-washing utensil with a handle to avoid direct hand contact with blades. Handle the
40 oz. 4-Blade Assembly with care to avoid contact with sharp edges. Rinse and air dry thoroughly.
WARNING: Handle the 40 oz. 4-Blade Assembly with care when washing, as the blades are sharp. Contact
with the blades’ edges can result in laceration.
3Dishwasher: The pitcher, lid,, splashguard, and 40 oz. 4-Blade Assembly are all dishwasher safe. It is recommended
that the lid and blade assembly be placed on the top rack. Ensure the blade assembly is removed from the pitcher before
placing in the dishwasher.
4Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing needs to be performed on the appliance at 1-877-646-5288.
HOW TO STORE
1Store the Ninja®Storm™upright with the 40 oz. 4-Blade Assembly inside the pitcher and splashguard and Master Pod on
the pitcher. Do not place anything on top. Store the rest of the attachments along side the appliance or in a cabinet where
they will not be damaged and won’t cause a hazard. Loosely wrap the power cord around the Master Pod.
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or Blades
Don’t Rotate.
Check that the bottom of motor head is clean and there is no food blocking
connection when placing on containers.
There is too much food in the pitcher.
The unit has overheated. Unplug and wait approximately 10 minutes before
using again.
Make sure the splashguard is securely on pitcher.
Make sure the Master Pod is securely placed on splashguard.
Check that the plug is securely inserted into the electrical outlet.
Check fuse or breaker. Replace fuse/reset breaker.
Food is Unevenly Chopped.
Either you are chopping too much food at one time, or the pieces are not small
enough. Try cutting the food into smaller pieces of even size and processing
smaller amounts per batch.
Food is Chopped Too Fine or is
Too Watery.
The food has been over processed. Use brief pulses or process for shorter time.
Let blades stop completely between pulses.
Food Collects On Splashguard/
Safety Cover or On the Sides of
the pitcher.
You may be processing too much food. Turn the machine Off. When the blades
stop rotating, remove the Master Pod and the splashguard. Remove some of the
food being processed.
You Cannot Achieve Snow From
Solid Ice.
Do not use ice that has been sitting out or has started to melt. Be sure to use
short pulses in the beginning to break up large pieces.
Troubleshooting Guide

10www.ninjakitchen.com
Product Registration
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja®product within
ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number
along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By
registering you acknowledge to have read and understood the instructions for use, and warnings set forth in
the accompanying instructions.
ONE (1) YEAR LIMITED WARRANTY
SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a
period of one (1) year from the date of purchase when utilized for normal household use, subject to the following
conditions, exclusions and exceptions.
The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at
our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has
been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused
by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited
Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs,
service or alteration to the product or any of its parts, which have been performed by a repair person not
authorized by SharkNinja Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the Limited
Warranty period, you may return the complete appliance and accessories with proof of purchase and date,
freight prepaid. For Customer Service support, call 1-877-646-5288 or visit our website www.ninjakitchen.com.
If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole
discretion, we will repair or replace it free of charge. Proof of purchase date and a check made payable to
SharkNinja Operating LLC in the amount of $19.95 to cover the cost of return shipping and handling must be
included.*
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/
or conventional warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific
obligations expressly assumed by it under the terms of this Limited Warranty. In no event is SharkNinja
Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states
do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to
you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state
to state or from province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date
and to attach tag to item before packing with your name, complete address and phone number with a
note giving purchase information, model number and what you believe is the problem with the item. We
recommend you insure the package (as damage in shipping is not covered by your Limited Warranty).
Mark the outside of your package “ATTENTION CUSTOMER SERVICE”.

SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
ninjakitchen.com
Ninja is a registered trademark of SharkNinja Operating LLC.
Storm is a trademark of SharkNinja Operating LLC.
Illustrations may differ from actual product. We are constantly striving to improve our
products, therefore the specifications contained herein are subject to change without notice.
For SharkNinja U.S. Patent information visit sharkninja.com/USPatents
© 2016 SharkNinja Operating LLC
QB751Q_30_SERIES_IB_160127_1
PRINTED IN CHINA