Noble House Home Furnishings RIGHT CHAIR User manual

CAUTION: You must read this before you proceed.
CAUTION : This Right Chair is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Right Chair and to prevent damage to the Right
Chair, 02 persons may be needed to execute this action.
RIGHT CHAIR

No. Qty
A
1
B
1
C
1
D
1
E
1
F
1
G
1
H
1
No. Qty
7
5
1
Left Back Cushion
Allen Key
Screws
(M6x35mm)
Left Arm Panel
Description
Right Arm Panel
Seat Cushion
Right Back Cushion
DescriptionPicture
Support Bar
Bolts
(M6x35mm)
Backrest Panel
Seat Panel
Picture

Read instructions, cover to cover.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Assemble on a clean non-marring surface (packing foam).
Save all packaging until finished.
Before Beginning Assembly:
Unpack and place all parts on a clean, non-marring surface.
This Right Chair has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Right Chair parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions herebelow to familiarise the parts and steps
before assembly.
Step 1
Right
Back
Cushion (H)
FRONT FACING
Backrest Panel (A)
Right Arm Panel (C)
OVERVIEW
Support Bar (E)
Left Arm
Panel (B)
Seat Panel (D)
Left
Back Cushion (G)
Seat Cushion
( )

Place Left Arm Panel (B) onto the assembled frame from Step 2
Step 3.1: Align the dowels of Support Bar (E) into the positions in the Left Arm Panel (B).
Then, affix Support Bar (E) with Right Arm Panel (C) by using Bolt (①) and Allen Key (③).
Step 3.2: Attach the Left Arm Panel (B) onto Backrest Panel (A) by using Bolts (①) and Allen Key
(
③
).
DO NOT FULLY TIGHTHEN BOLTS.
Step 2
Step 3
Place the Right Arm Panel (C) with inside face skywards onto a clean, soft surface to avoid any
scratches or damages to the product.
Step 2.1: Align the dowels of Support Bar (E) into the positions in the Right Arm Panel (C).
Then, affix Support Bar (E) with Right Arm Panel (C) by using Bolt (①) and Allen Key (③)..
Step 2.2: Attach the Backrest Panel (A) onto Right Arm Panel (C) by using Bolts (①) and Allen
Key (
③
).
DO NOT FULLY TIGHTHEN BOLTS.
Step 2.1
Step 2.2
Step 3.1Step 3.2

Attach the Seat Panel (D) into the Right Chair as shown in picture above.
Affix Seat Panel (D) with Right Chair by using Screws (
②
) and Allen Key (
③
).
Note: Using Screws (
②
) from inside to outside of Seat Panel (D)
DO NOT FULLY TIGHTHEN SCREWS.
Step 4
Step 5
Inspect the Right Chair and make sure all parts are adequately connected.
In a sequential manner, tighten all Screws and Bolts at all joints.
With assistance from your adult partners, adjust the Levellers to desired height to avoid
wobbles.
Adjust Pre-installed Levellers
height for balance

Step 7
Note: This is optional step in case we want to connect all chairs in a set together and should be
done before placing cushion
With assistance from your adult partners, up side down the chairs and using pre-fixed clip to
connect the chairs together
Step 6
Turn the Right Chair right side up.
Place Seat Cushion (F), Left Back Cushion (G) and Right Back Cushion (H) to Seat Panel (D).
Inspect it and make sure all parts are adequately connected.
Ensure all screws, bolts are fully locked into position and secured.
The Right Chair is ready to be used.
Caution: This Right Chair can only be used on a flat, level surface.
H
G
F