Noble House Home Furnishings Sectional Modular Sofa-L User manual

Assembly Instructions
Caution: You must read this before you proceed
Please look in chair seat for hardware packs and legs.
Sectional Modular Sofa-L
Noble House Home Furnishings LLC Page 1 OF 7

Label Picture Description QTY
A Sofa-L 1
B Sofa Leg 4
Label Picture Description QTY
①Gasket 7
Before Beginning
Assembly:
Assembly Preparation
Part List
Hardware
X7
Noble House Home Furnishings LLC Page 2 OF 7

Overview
Assembly Steps
This Sofa has multiple parts and may require up to 15 minutes to assemble. To give you an
overview of the Sofa parts, the above picture is to help you put the various parts into perspective.
Please read through theinstructions below to familiarise yourself with the parts and steps before
assembly.
Note: lt is recommended that you have an adult partner to assist during the entire assembly
process.
FRONT FACING
Sofa-L (A)
Sofa Leg(B) Sofa Leg(B)
Noble House Home Furnishings LLC Page 3 OF 7

Step 1
Step 2
With assistance from your adult partners, position the Sofa-L(A) on it's back on a clean,non-
marring surface, as shown.
Unzip the pouch and remove the four Legs and Hardware.
Close the pouch before assembling.
Sofa-L (A)
Gasket(①)
Use Gasket(①)
to achieve stablity
Sofa Leg (B) Sofa-L(A) Sofa Leg (B)
Noble House Home Furnishings LLC Page 4 OF 7

Step 3
Install the Sofa Legs(B) into the bottom of the Sofa-L(A) by placing one Gasket(①)onto the
threaded stem.
Insert the threaded stem of the Leg(B) into the front mounting positions of the Sofa-L(A) then
tighten by turning the leg clockwise until the leg is completely secure.
Repeat this process with the remaining three legs.
Note:The use of the Gasket is OPTIONAL and are especially useful to help alleviate slight
wobbleness. Some legs may need more than one whilst some legs may not need any.
Place the Sofa-L(A) onto the Sofa.
Your Sofa is ready for use.
This Sofa can only be used on a flat, level surface.
Sofa-L(A)
Noble House Home Furnishings LLC Page 5 OF 7

Additional Steps
Turn out the Nylon Connectors on the Sofa bottom as above picture 1 shows.
Connect the Sofa with Armless or Ottoman by inserting the Nylon connector to metal parts on
bottom of Armless or Ottoman. (shown as above pictures 2&3.
Make sure all parts are connected and securely locked into position.
Your Sofa Set is ready for use.
This Sofa Set can only be used on a flat level surface.
Step 1
Step 2
Noble House Home Furnishings LLC Page 6 OF 7

Noble House Home Furnishings LLC Page 7 OF 7