Noble House Home Furnishings SOFA User manual

Assembly Instructions
Caution: You must read this before you proceed
SOFA
Noble House Home Furnishings LLC Page 1 OF 10

Label Picture Description QTY
A Backrest 1
B Left Armrest 1
C Right Armrest 1
D Seat 1
E Left Seat Cushion 1
F Right Seat Cushion 1
G Back Cushion 2
H Iron Leg 4
IMiddle Leg 1
Part List
Noble House Home Furnishings LLC Page 2 OF 10

Label Picture Description QTY
①Plastic Washer 2
②Bolt(M8*55) 5
③Flat Washer Ring 13
④Spring Washer Ring 13
⑤Bolt(M8*25) 9
⑥Allen Wrench 1
Before Beginning
Assembly:
Hardware List
Assembly Preparation
*2
*4 *1 *5
*2 *9
*13 *13 *1
Noble House Home Furnishings LLC Page 3 OF 10

Assembly Steps
This Sofa has multiple parts and may require up to 60 minutes to assemble. To give you an overview of
the Sofa parts, the above picture is to help you put the various parts into perspective. Please read
through the instructions below to familiarise yourself with the parts and steps before assembly.
Note: It is recommended that you have an adult partner to assist during the entire assembly
process.
OVERVIEW
FRONT FACING
Backrest (A)
Left Armrest(B) Back Cushion(G) Right Armrest(C)
Right Seat Cushion(F)
Left Seat Cushion(E)
Iron Leg(H)
Seat(D)
Noble House Home Furnishings LLC Page 4 OF 10

Step 1
Step 2
Open the carton and place all the parts on a clean, non-marring surface.
Attach the Left Armrest(B) and Right Armrest(C) to the Seat(D) as shown above.
NOTE:The fabric on the side of Seat(D) do not stuck inside.
Attach the Left Armrest(B) & Right Armrest(C) using Bolts(②),Spring Washer Rings(④),Flat Washer
Rings(③) with the Allen Wrench(⑥), turning clockwise until tight.
Left Armrest(B)
Left Armrest(B)
Right Armrest(C)
Seat(D)
Fabric on the side do
not stuck inside.
③
④
Seat(D)
Right Armrest(C)
②
⑥
Noble House Home Furnishings LLC Page 5 OF 10

Step 3
Step 4
Install the Iron Legs(H) to Left Armrest(B) using Bolts(⑤),Spring Washer Rings(④),Flat Washer Rings(③)
with the Allen Wrench(⑥), turning clockwise until tight.
Repeat the same process with the Right Armrest(C).
Middle Leg(I)
①
Right Armrest(C) Left Armrest(B)
Seat(D)
Iron Leg(H)
⑥
⑤
④
③
Noble House Home Furnishings LLC Page 6 OF 10

Step 6
Step 5
Install the Middle Leg(I) to the Seat(D) using a Plastic Washer(①) turning clockwise until tight.
Stick the fabric of the Seat(D) to the Right Armrest(C) and Left Armrest(B) as shown above.
Left Armrest(B)
Right Armrest(C)
Backrest(A)
Right Armrest(C)
Left Armrest(B)
Stick the fabric to the
Right Armrest
Seat(D)
Noble House Home Furnishings LLC Page 7 OF 10

Step 7
Step 8
Put the Left Seat Cushion(E) and the Right Seat Cushion(F) on the sofa.
Slide the Tapered Connectors on the Backrest(A) into the Tapered Connectors on the Left Armrest(B)
as shown in the picture.
Repeat the same process with the Right Armrest(C).
Note: Make sure the Tapered Connectors on the Backrest(A) lock into the Tapered Connectors on
the Left Armrest(B) and the Right Armrest(C).
Assistance from an adult partner is necessary for this assembly process.
During this assembly process - do exercise caution. You may need to use your hand to press
down and or pave away the padded surface to facilitate the 'slip and slide' assembly.
Caution: Ensure that your fingers do not get caught or pinched in the assembly process.
Left Seat Cushion(E) Right Seat Cushion(F)
Back Cushion(G)
Noble House Home Furnishings LLC Page 8 OF 10

Step 9
Your Sofa is ready for use.
This Sofa can only be used on a flat, level surface.
Place the Back Cushions(G) on the sofa.
Noble House Home Furnishings LLC Page 9 OF 10

Noble House Home Furnishings LLC Page 10 OF 10