Noble House Home Furnishings Love seat User manual

Love seat
Assembly Instructions
CAUTION : This Loveseat is NOT a TOY.
Keep your child children at bay in the process of assembly.
For turning the Loveseat and to prevent damage to the Loveseat, 02
persons may be needed to execute this action.
Please look in the under table top for hardware packs
CAUTION: You ust read this before you proceed.
Noble House Home Furnishings LLC Page 1 of 8

No. Picture Description Qty
A
Right Arm Panel 1
B
Left Arm Panel 1
C
Seat Panel 1
D
Backrest Panel 1
E
First Leg 2
F
Second Leg 2
G
Seat Cushion 2
H
Back Cushion 2
No. Picture Description Qty
①Bolt (M6x20mm) 9
②Bolt (M6x30mm) 5
③Bolt (M6x40mm) 3
④Screw (M6x20mm) 13
⑤Washers (M6x16x1mm) 15
⑥Allen Key (M4) 2
Hardware
Noble House Home Furnishings LLC Page 2 of 8

Assembly Preparation
This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview
of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read
through the instructions herebelow to familiarise the parts and steps before assembly.
Assembly Steps
Before Beginning Assembly:
Back Cushion (G)
Seat Cushion (H) Backrest Panel (D)
Left Arm Panel (B)
ight Arm Panel (A)
Second Leg (F)
First Leg (E)
First Leg (E)
Seat Panel (C)
FRONT FACING
Noble House Home Furnishings LLC Page 3 of 8

Step 2
With the help of your adult partners, attached the tenons of First Leg (E ) and Second Leg (F) into the
Right Arm Panel (A) using Screws (④) with Allen Key (⑥).
Do not fully tighten the Screws.
Unpack and place all parts on a clean, non-marring surface.
Step 1
F F
⑥
④
E
E
⑥
④
A
Noble House Home Furnishings LLC Page 4 of 8

Step 3
Repeat the same process as step 2 with the Left Arm Panel (B) with First Leg (E), Second (F)
Step 4
4.1) With the help of your adult partner, insert the tenons of the Backrest (D) into the hook of Left Arm
Panel (B) as shown above
4.2) Then secure the Backrest (D) to the Left Arm Panel (B) using Bolt (③),Washer (⑤) with Allen Key
(
⑥
) as shown above
Do not fully tighten the Bolts
F
B
E
⑥
④
E
F
④
⑥
B
D
⑤
③
⑥ STEP 4.1
STEP 4.2
Noble House Home Furnishings LLC Page 5 of 8

Repeat the same process as step 4 with the other the Backrest (D)
Step 5
With the help of your adult partner, turn up the frame in step 5:
6.1) Secure the Seat Panel (C ) to Right Arm Panel (A ) using Bolt (
②
), Washers (
⑤
) and Allen Key (
⑥
)
as shown above. Repeat the same process with Left Arm Panel (B )
6.2) Secure the Seat Panel (C ) to the Right Arm Panel (A ), Left Arm Panel (B ) and the Backrest Panel
(D) using Bolt (①), Washers (⑤) and Allen Key (⑥) as shown above.
Do not fully tighten the Bolts
③
⑤
A
⑥
①
⑤
A
C
D
B
⑥ ②
⑤
D
⑥
Noble House Home Furnishings LLC Page 6 of 8
Step 6
STEP 6.1 STEP 6.2

Place the Loveseat onto a flat, level surface.
Then EXERT pressure, floorwards onto the Loveseat with both hands.
This pressure will help the Loveseat reach full alignment at all joints.
In a sequential manner, gradually tighten all Bolts at all joints until evenly secured.
Inspect the Loveseat and make sure all parts are adequately connected.
Adjust the Levellers until the Loveseat is level with the ground.
To adjust the Levellers, get assistance from an adult partner to lift lean and hold the
Loveseat while you are working.
Place Seat Cushion (H) and Back Cushion(G) onto the Loveseat.
Inspect it and make sure all parts are adequately connected.
Ensure all screws, bolts are fully locked into position and secured.
The Loveseat is ready to be used.
Caution: This Loveseat can only be used on a flat, level surface.
Step 8
G
H
Step 7
Adjust Pre-installed Levellers
height for balance
Noble House Home Furnishings LLC Page 7 of 8

Noble House Home Furnishings LLC Page 8 of 8