Noble House Home Furnishings Bed User manual

Label Picture Description QTY
A Headboard 1
B Right Leg 1
C Left Leg 1
D Footboard 1
E First Side Rail 2
F Second Side Rail 2
G First Support Bar 1
H Second Support Bar 1
I First Support Leg 2
J First Slat Frame 1
K Second Slat Frame 1
L Second Support Leg 5
Assembly Instructions
Caution : You should read this carefully before you proceed
Please look in the third support leg for hardware packs
Bed
Parts List
Noble House Home Furnishings LLC Page 1 OF 8

Label Picture Description QTY
①Bolt (M6 x 10 mm) 9
②Bolt (M8 x 25 mm) 13
③Bolt (M6 x 25 mm) 18
④Screw (ф4 x25 mm)15
⑤Allen Key (K5) 2
⑥Allen Key (K4) 2
⑦Connection Metal 2
⑧Screwdriver (not provided) 1
Hardware
Noble House Home Furnishings LLC Page 2 OF 8

This Bed has multiple parts and may require up to some 30 minutes to assemble. To give you an
overview of the Bed parts, the above picture is provided to help you put the various parts into
perspective. Please read through the instructions below to familiarise yourself with the parts and
steps before assembly.
Assembly Steps
Assembly Preparation
Before Beginning Assembly:
Headboard (A)
Left Leg (C)
Right Leg (B)
First Support Bar (G)
First Slat Frame (J)
Second Slat Frame (K)
Second Support Bar (H)
Footboard (D)
Second Side Rail (F)
First Support Leg (I)
First Side Rail (E)
FRONT FACING
OVERVIEW
Second Support Leg (L)
Noble House Home Furnishings LLC Page 3 OF 8

Step 1:
Unpack and place all parts on a clean, non-marring surface.
Step 2:
With assistance from your adult partner, carefully place the Headboard(A) facedown on a clean,
non-marring surface as shown above.
Attach the Right Leg (B) and the Left Leg (C) to the Headboard (A), then place the Connection
Metal (⑦) onto it as shown above. Secure it using Bolts (③) and the Allen Key (⑥).
Do not fully tighten the Bolts at this stage.
Step 3:
Connect the First Support Leg (I) to the First Side Rail (E ) and the Second Side Rail (F), then
secure it using Bolts (②) and the Allen Key (⑥) as shown above.
Repeat the same process with the remaining First Side Rail (E) and the Second Side Rail (F).
Do not fully tighten the Bolts at this stage.
3
6
7
Headboard (A)
Left Leg (C)
Right Leg (B)
6
2
Second Side Rail (F)
First Side Rail (E)
First Support Leg (I)
Noble House Home Furnishings LLC Page 4 OF 8

With the help of your adult partner, attach the Footboard (D) to the frame from step 4, then
secure it using Bolts (①) and the Allen Key (⑤) as shown above.
Do not fully tighten the Bolts at this stage.
Step 4:
With the help of your adult partner, attach the frame from step 3 to the frame from step 2, then
secure it using Bolts (①) and the Allen Key (⑤) as shown above.
Do not fully tighten the Bolts at this stage.
Step 5:
1
1
5
Headboard (A)
1
1
5
Headboard (A)
Footboard (D)
Noble House Home Furnishings LLC Page 5 OF 8

With the help of your adult partner, align the Left Leg (C) to the frame from step 3 and the
Footboard (D). Secure it using Bolts (①) and the Allen Key (⑤) as shown above.
Do not fully tighten the Bolts at this stage.
Step 6:
Step 7:
7.1 The First Support Bar (G) to under the Second Slat Frame (K) using Bolts (③) and the the
Allen Key (⑥) as shown above.
7.2 The Second Support Bar (H) to under the First Slat Frame (J) using Bolts (③) and the the
Allen Key (⑥) as shown above.
Do not fully tighten the Bolts and screws at this stage.
5
Headboard (A)
Footboard (D)
1
1
Left Leg (C)
Step 7.1
Step 7.2
3
6
Noble House Home Furnishings LLC Page 6 OF 8

Step 8:
Step 9:
Upside down step 8.
9.1 Second Slat Frame (K) to the First Side Rail (E) using Screw (④) and a Screwdriver (not
provided) as shown above.
9.2 First Slat Frame (J) to the Second Side Rail (F) using Screw (④) and a Screwdriver (not
provided) as shown above. .
Do not fully tighten the Bolts and screws at this stage.
Upside down step 7.
8.1 The Second Support Leg (L) to the First Support Bar (G) using turn hand as shown above.
8.2 The Second Support Leg (L) to the Second Support Bar (H) using turn hand as shown above.
Do not fully tighten the Bolts and screws at this stage.
Step 9.1
Step 8.1
Step 8.2
4
Step 9.2
Noble House Home Furnishings LLC Page 7 OF 8

Step 10:
Check for wobbles.
If the bed does not wobble, in a sequential manner, gradually tighten all Bolts until evenly secured.
Inspect the Bed and make sure all parts are adequately connected.
With assistance from your adult partner, adjust the levellers to the desired height to avoid wobbles.
To adjust the Levellers, get assistance from an adult partner to lift/lean and hold the Bed while you are working.
Your Bed is ready for use.
This Bed can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 8 OF 8