Noble House Home Furnishings CHC2178 User manual

BARSTOOL
CAUTION: This Barstool is NOT a TOY.
Keep your child/children at bay during the assembly process.
Whenever lifting the Barstool and to prevent damage to it two adults are needed
to execute this action.
1 OF 8
Please look in the Leg Panels for hardware packs
CAUTION: You must read this before you proceed.

No. Picture Description Qty
A
B
1
1
Parts List
C1
E
1
Left Leg Panel
D
Seat Panel
1
2 OF 8
F
Backrest
Right Leg Panel
Front Leg Connection
Back Leg Connection 1
Noble House Home Furnishings LLC

Before Beginning Assembly:
Assembly Preparation
Read instructions, cover to cover.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Assemble on a clean non-marring surface (packing foam).
Save all packaging until finished.
No. Picture Description Qty
Hardware
1
2
9
3
4
Chair Hardware
3 OF 8
Allen Key
19
11
1
Noble House Home Furnishings LLC
Bolt M6 x 20mm
Bolt M6 x 32mm
x 9
x 11
x 19
Washer
(6/16 x 2mm)

Assembly Steps
FRONT FACING
OVERVIEW
Seat Panel (A)
Backrest (B)
Right Leg Panel (C)
Left Leg Panel (D)
Front Leg Connection(E)
Back Leg Connection(F)
Step 1
Unpack and place all parts on a clean, non-marring surface.
Noble House Home Furnishings LLC
4 OF 8
This Barstool has multiple parts and may require up to 30 minutes to assemble. To
give you an overview of the Barstool parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.

Assembly Steps
Step 2
Step 3
Noble House Home Furnishings LLC
A
C
F
C
A
E
4
C
3
43
1
1
3
4
2
3
5 OF 8
Put the Seat Panel (A) onto the Right Leg Panel (C) in the direction of the arrow as
shown in above picture.
Attach the Seat Panel (A) to the Right Leg Panel (C) using Bolts(2), Washers (3)
and the Allen Key (4).
Do not fully tighten the Bolts.
Attach the Back Leg Connection (F) and the Front Leg Connection (E) to the Right
Leg Panel (C) using Bolts (1), Washers (3) and the Allen Key (4).
Do not fully tighten the Bolts.
wood

B
CE
F
D
A
Assembly Steps
Step 4
Step 5
Noble House Home Furnishings LLC
D
C
F
E
A
1
3
4
3
2
4
3
3
1
4
Attach the Left Leg Panel (D) to the Seat Panel (A) using Bolts (2), Washers (3) and
the Alley Key (4).Then secure the Left Leg Panel (D) to the Front Leg Connection(E)
and the Back Leg Connection (F) using Bolts (1), Washers (3) and the Alley Key (4).
Do not fully tighten the Bolts.
3
2
4
6 OF 8
With the assistance of your adult partner, turn the Barstool right side up.
Attach the Backrest (B) to the Right Leg Panel (C) and the Left Leg Panel (D) using
Bolts ( 2 ) , Washers ( 3) and the Allen Key (4)
Do not fully tighten the Bolts.

Assembly Steps
7 OF 8
Noble House Home Furnishings LLC
Step 6
Exert pressure floorwards, onto the Barstool with both your hands.
This pressure will help the Legs and the Barstool reach full alignment status.
Check for wobbles on a LEVEL surface.
If no wobbles are found proceed to tighten the Bolts in a sequential manner, until
evenly secured.
When tightening the Bolts tighten sequentially.
Do not tighten any Bolt fully and then move on towards the next one.
If there are still wobbles, loosen the Bolts and execute the same above process.
Your Barstool is ready for use.
This Barstool can only be used on a flat, level surface.

8 OF 8