Nokia RH-53 Service manual

Nokia Customer Care
RH-53/54
Issue 1 09/2004 Copyright © 2004 Nokia. All Rights Reserved
5-Service Tools

RH-53/54
Nokia Customer Care 5-Service Tools
2 COMPANY CONFIDENTIAL ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
[This page left intentionally blank]

ISSUE 1 09/2004 COMPANY CONFIDENTIAL 3
Copyright © 2004 Nokia. All Rights Reserved.
RH-53/54
5-Service Tools Nokia Customer Care
Table of Contents
Page No
Custom Service Tools ........................................................................................ 5
Standard service tools ....................................................................................... 7
Service Cables ................................................................................................ 10
DA-27 Working Instruction............................................................................... 12

RH-53/54
Nokia Customer Care 5-Service Tools
4 COMPANY CONFIDENTIAL ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
[This page left intentionally blank]

ISSUE 1 09/2004 COMPANY CONFIDENTIAL 5
Copyright © 2004 Nokia. All Rights Reserved.
RH-53/54
5-Service Tools Nokia Customer Care
Custom Service Tools
Product Service Tool Product
Code Photo Description Info
DA-27 Docking Station
Adapter 0780352 The Docking Station Adapter, together
with a Docking Sta-
tion, is used for anal-
ysis of Mbus, Fbus,
RF, and audio con-
nections.
Pack of test 10 test
pins to be used with
SF-33 and DA-27,
code 0780398
Spare lock part
for DA-27 0780465 Spare lock part for DA-27
MJ-36 Module Jig 0770856 Thisjigallowsphone
PWB-level service
and troubleshoot-
ing. Components
must be protected
against over-voltage
and over-current.
RJ-39 Soldering Jig 0780321 Used for soldering
and as a rework jig
for system module.
SA-45 RF Coupler 0780353 Enables RF connec-
tion with DA-27.
Note! Do not use for
RF-tuning.

RH-53/54
Nokia Customer Care 5-Service Tools
6 COMPANY CONFIDENTIAL ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
Product Service Tool Product
Code Photo Description Info
SF-33 POS Flash
Adapter 0770857 The flash adapter allows FBUS/MBUS
connections for
flashing.
Pack of test 10 test
pins to be used with
SF-33 and DA-27,
code 0780398
ST-12 Rework stencil 0780384 Front End Module
(FEM)
RJ-51 Rework Jig 0780417 To be used with ST-
12.!

ISSUE 1 09/2004 COMPANY CONFIDENTIAL 7
Copyright © 2004 Nokia. All Rights Reserved.
RH-53/54
5-Service Tools Nokia Customer Care
■ Standard service tools
Product Service Tool Product
Code Photo Description Info
ACF-8 UniversalPower
Supply 0680032 ACF-8 is used to power FPS-8 and FLS-4S. ACF-
8 has 6 Vdc and 2.1A out-
put.
FLS-4S POS Flash
Adapter 0080543 (Ameri-
cas)
0080542
(APAC)
0080541
(Europe/
Africa)
The Point of Sale (POS)
flash is a low-cost soft-
ware upgrade tool. This
requires the XCS-1 cable
and ACP-8U for operation.
FPS-8 Flash Prommer 0080321 The Flash Prommer FPS-
8 is used for heavy flash.
FPS-11 Parallel Flash
Prommer 0770758 Flashing several
units(max 8) at one time.
The FPS-11 multi prom-
mer will replace FPS-8C
JBV-1 Docking Station 0770298 The Docking Station and
the Docking Station
Adapter are needed for
Mbus, Fbus, RF, and
audio connections.
This setup allows connec-
tion between flash prom-
mers. When the audio box
is connected, it has to be
connected to the phone’s
audio connector. The
Docking Station can be
powered by FPS-8 or
external power supply.

RH-53/54
Nokia Customer Care 5-Service Tools
8 COMPANY CONFIDENTIAL ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
Product Service Tool Product
Code Photo Description Info
PKD-1 SW Security
Device 0750018 SWsecurity device PKD-1 is hardware device that,
when connected to the
parallel (LPT) port of the
PC, enables the use of the
service software. Without
the dongle present, it is
not possible to use the
service software. Printers
or other peripheral
devices can be con-
nected to the PC through
the dongle, if needed.
Caution: Make sure that
you have switched off the
PC and the printer before
making connections!
Caution: Do not connect
the PKD-1 to the serial
port. You may damage
your PKD-1!
SPS-2 Soldering Paste
Spreader 0770471
SRT-6 SRT-6 Opening
Tool 0770431 Opening tool for e.g. removing display module
from C2 cover

ISSUE 1 09/2004 COMPANY CONFIDENTIAL 9
Copyright © 2004 Nokia. All Rights Reserved.
RH-53/54
5-Service Tools Nokia Customer Care
Product Service Tool Product
Code Photo Description Info
CA-5S Printing Cable 0730283 The DC cable CA-5S tobe
used with the JVB-1 dock-
ing station.
Standard toolkit Content:
-Nokia opening tool SRT-6
Nokia No. 0770431
-Tonichi torque driver Nokia
No. 6901525
-Hoya micro fibre cloth
MX304
-Dastex gloves S, M, XL
-Artilux goggles AH166
-Wera bit T5 867/4TX 5x50
-Wera bit T6 867/4TX 6x50
-Wera bit T6 867/4 6IPx50
-Facom side cutter 416E
-Facom T5 driver SP.14032
-Facom T6 driver SP.14033
-Facom slot screwdriver
AEF. 2x35.E
-Wetec tweezers 7abb SA-
ESD
-Wetec tweezers 22 SA-ESD
-Wetec tweezers 13 SA-
SMD ESD
-Wetec tweezers PSF SA-
ESD
-Wetec ESD brush E1211
-Kaiser Fototechnik airbrush
6315
-Wetec dental tool
DEM83266/0
-RS Components Scissors
323-5732

RH-53/54
Nokia Customer Care 5-Service Tools
10 COMPANY CONFIDENTIAL ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
■ Service Cables
Product Service Tool Product
Code Photo Description Info
AXS-4 Service Cable 0730090 The AXS-4 D9-D9
servicecableisused
to connect two 9-pin
connectors (e.g.,
between PC and
FPS-8). AXS-4
length is 2 meters.
DAU-9S MBUS Cable 0730108 The MBUS cable
DAU-9S has a mod-
ularconnectorandis
used between PC
serial port and, for
example, the MJ-36.
FLC-2 DC Cable 0730185 FLC-2 is used to
supply a controlled
operating voltage.
PCS-1 Power Cable 0730012 The Power Cable
PCS-1 is used to
connect the service
tools (JBV-1, MJ-36)
to an external power
supply.