norbar Secondary Handle User manual

www.norbar.com Instrucon Part No. 34439 | Issue 2
© Norbar Torque Tools Ltd 2022
Norbar Torque Tools Ltd
Wildmere Road, Banbury, Oxfordshire, OX16 3JU
The secondary handle is an easy to t and
versale accessory which oers addional
support and ease of handling when applying
torque with Norbar’s powered mulpliers. The
secondary handle is designed to t directly to
those powered mulpliers that have a locaon
grove in the annulus, covered by a band, as
shown below. Remove this band before ng
the secondary handle. SecondarySecondary
HandleHandle
SYSTEM
NORBAR
SYSTEM NORBAR
SYSTEM
NORBAR
View our ‘How to Use a Torque Wrench’
Video at:
www.norbar.com/HowtoUseATorqueWrench
NORBAR TORQUE TOOLS LTD
Wildmere Road, Banbury,
Oxfordshire, OX16 3JU
UNITED KINGDOM
Tel + 44 (0)1295 270333
Email [e-mail]
To nd your local Norbar
company or distributor, please
scan the QR code below.

1 2
SYSTEM
NORBAR
3
Remove both screws with a 4mm Allen Key Posion the Secondary Handle over the
groove of the gearbox and ghten both
screws to 9 N·m. The secondary handle
has been designed so that it can freely
rotate around the tool’s gearbox. This
means that the handle does not become
a trap hazard.
The handle grip can be re-posioned into 1 of
3 orientaons. Remove the screw holding it in
place and place the handle into the required
posion, then replace
and ghten the screw.