norix TNT1853-0000XXT User manual

A
B
C
H
F
G
FLUSH WITH EACH OTHER
J
This product requires two people for assembly
Step 1: Line the support frame (B) to the
tall end frames (A) to the desired height flush
to the end frame rails. Secure 1 end of the
support frame to the tall end frame using
(2) 5/16 Screws (H), (2) Lock Washers (F)
and (2) Flat Washers (G). Repeat for other
tall end frame.
Step 2: Insert the support channel front (C) to tall
end frames as shown. The support channel should
line up to the same height to the support frame.
Secure the channel using (2) #10 Self drilling screws (J)
to the end frame.
Tools Needed
Variable Speed Drill
Philips Head Driver
PARTS LIST
ITEM NO. QTY PART NUMBER DESCRIPTION
A 2 036-T101-XX Tall Steel End Frame
B 1 036-T201-XX Support Frame, Loft Bed
C 1 036-T105-XX Support, Channel Front, Loft Desk
D 1 050-T101-XX Panel, Loft Desk
E 1 037-T005-XX Deck Spring Bunk Titan 81 x 37.50 Wedge Lock
F 12 025-030 Lock Washer, 1/2" Split, Black Oxide
G 16 025-031 Washer, Flat, 11/32" ID X 5/8" OD x 0.083" THK Black Oxide
H 12 021-102 Screw, 5/16-18 X 1-1/2 Button Head, Hex, Black Oxide
I 10 021-125 Screw, Wood, #8 X 5/8" L,Pan Head, Phillips Head, Black Oxide
J 2 021-104 Screw, Self-Drilling, #10-16 X .625" PH, SQ, Blk. Ox.
K 2 036-269 Wedge Lock Hook, Right, Spring Deck
L 2 036-268 Wedge Lock Hook, Left, Spring Deck
M 1 071-014 Hex Bit, 3/16"
N 4 021-115 Screw, Machine 1/4-20 x 3/4 L, BH, Hex Socket Cap, Black
O 4 025-018 Nut, Hex, 1/4-20 Centerlock, Zinc
Rev. B - 3/7/14
091-804
Page 1 of 3
www.norix.com ● TEL [phone]
Assembly Notes:
Norix is not responsible for any damage due to improper installation. If your shipment does not match the parts list, please contact Norix Customer Service at 800-234-4900.
Norix reserves the right to modify design specifications at any time without an obligation to owners of previously sold products.
___________________________________________________________________________________________________________________________________________________________________________________________________
Titan Loft Bed, Spring Deck, Tall
End Frames & Spanner Desk
Assembly Instructions
Model Number
TNT1853-0000XXT

D
L
E
I
K
F
H
G
Step 3: Place the panel desk (D) on top of the
support frame and support channel front.
Secure the panel desk with (10) Wood Screws
(I) through the holes of the frame and channel.
Step 4: Place the Left Wedge Lock
Hook (K) to the end frame at a desired
height and secure it with (2) 5/16
Screws (H), (2) Lock Washers (F) and
(2) Flat Washers (G). Repeat for the
Right Wedge Lock Hook (L) and for the
other tall end frame.
Step 5: Place the Spring Deck
Bed (E) on top to end frames
with the knobs secure to the
wedge lock hooks (K,L)
Rev. B - 3/7/14
091-804
Page 2 of 3

N
O
G
N
K
E
Last Step: Secure corners of Spring Deck (E)
to Wedge Lock Hooks (K,L) with (1) Flat Washer (G),
(1) Hex Nut (O), and (1) Machine Screw (N)
Rev. B - 3/7/14
091-804
Page 3 of 3