Nortel NA Operation manual

1166-025-514 Rev. C
Remote Annex Network
Administrator Utility (na) for
Windows NT® and Windows 95
R3.0.1 Release Notes
Release 3.0 of the Remote Annex Network Administrator Utility
(NA)isacommand-lineinterfacethatenablesyoutomonitorandmodify
Remote Annex operating characteristics.
Included in these Release Notes are the following:
• Product Features
• Supported Hardware Platforms
• System Requirements
• Compatibility
• Special Considerations
• Known Problems/Limitations
• Product Features
Using NA, you can:
• Set and Display the values for the Remote Annex and its ports
• Boot or reset the Remote Annex and its ports
• Identify a Remote Annex by its Internet address or host name
• Write the current configuration settings to a script file
• Copy the current configuration settings from one port to another
or from one Remote Annex to another
• Broadcast administrative messages to the Remote Annex ports
• The NA installation program provides the ability to make a set
of 3.5" installation diskettes.

166-025-514 Rev. C
Remote Annex Network Administrator Utility (na) for Windows NT® and Windows 95 R3.0.1 Release Notes
2
Supported Hardware Platforms
The NA utility supports the following Remote Annex hardware running
the specified Annex Software Release:
Table 1. Supported Hardware Platforms
Hardware Software
RA2000 R13.3
RA4000 R13.3
RA6100 R13.3
5390 R13.3
5391 R13.3
5393 R13.3
5399 R14.0
RA6300 R13.3
RA6300 R13.3
Annex 3 10.0
Micro Annex 10.0
MicroCS 10.0
Cabletron CSMIMII R13.3
Cabletron CSMIMT1 R13.3
Cabletron MODMIM R13.3
3COM 6133C-XS R13.3
3COM 6117C-XS R13.3

3
Remote Annex Network Administrator Utility (na) for Windows NT® and Windows 95 R3.0.1 Release Notes
166-025-514 Rev. C
Hardware/Software Requirements
• Personal Computer - 80486 100MHz recommended
• Monitor - VGA or SVGA
• RAM - 8MB minimum;16MB recommended for Windows 95;
32MB recommended for Windows NT
• Free Space on Hard Drive - 1MB
• Microsoft Compatible Mouse
• CD ROM (required for initial installation)
• Windows 95, Windows NT 3.51, or Windows NT 4.0
Special Considerations
The NA utility no longer requires that you have administrator privileges
onanNThosttomakechangestotheconfigurationoftheRemoteAnnex.
You should set the superuser password on the Remote Annex to prevent
unauthorized access.