Norton clipper CM 450 Junior User manual

CM 450 Junior
OPERATING INSTRUCTIONS
Translation of the original instructions

VERS. 07.06.2018 CM 450 Junior E_MAN_EN
2

VERS. 07.06.2018 CM 450 Junior E_MAN_EN
3
The undersigned manufacturer:
SAINT - GOBAIN ABRASIVES S.A.
190, BD J.F. KENNEDY
L- 4930 BASCHARAGE
Declares that this product:
Masonry Saws: CM 450 Junior 1-30-1 230V Code: 70184608625
is in conformity with the following Directives:
"MACHINES" 2006/42/CE
"LOW VOLTAGE" 2014/35/EU
"ÉLECTROMAGNÉTIC COMPATIBILITY" 2014/30/EU
"NOISE" 2000/14/CE
and European standard:
EN 12418 –Masonry and stone cutting-off machines –Safety
Valid for machines as of serial number:
161255080
Storage site for the technical documents :
Saint-Gobain Abrasives 190, Bd. J. F. Kennedy 4930 BASCHARAGE, LUXEMBOURG
This declaration of conformity loses its validity when the product is converted or modified
without agreement.
Bascharage, Luxembourg, 07.06.2018.
François Chianese, executive officer
Declaration of conformity

VERS. 07.06.2018 CM 450 Junior E_MAN_EN
4

VERS. 07.06.2018 CM 450 Junior E_MAN_EN
5
CM 450 Junior
OPERATING INSTRUCTIONS
1BASIC SAFETY INSTRUCTIONS 6
1.1 Symbols 6
1.2 Machine plate 7
1.3 Safety instructions for particular operating phases 7
2MACHINE DESCRIPTION 8
2.1 Short description 8
2.2 Purpose of use 8
2.3 Layout 8
2.4 Technical Data 10
2.5 Statement regarding the vibration emission 11
2.6 Statement regarding noise emission 12
3ASSEMBLY AND COMMISSIONING 13
3.1 Tool assembly 13
3.2 Feet and conveyor cart assembly 13
3.3 Electrical connections 14
3.4 Starting the machine 14
3.5 Water cooling system 14
4TRANSPORT AND STORING 15
4.1 Securing for transport 15
4.2 Transport procedure 15
4.3 Long period of inactivity 15
5OPERATING THE MACHINE 16
5.1 Site of work 16
5.2 Cutting methods 16
6MAINTENANCE AND SERVICING 18
7FAULTS: CAUSES AND CURES 19
7.1 Fault-finding procedures 19
7.2 Trouble-shooting guide 19
7.3 Circuit diagram 20
7.4 Customer service 21
7.5 Spare parts 22