Norton clipper CS 352 B User manual

CS 352 B
OPERATING INSTRUCTIONS
Translation of the original instructions

VERS.2023.03.15 CS 352 B_MAN_EN
2

VERS.2023.03.15 CS 352 B_MAN_EN
3
The undersigned manufacturer:
SAINT - GOBAIN ABRASIVES S.A.
190, BD. J. F. KENNEDY
L-4930 BASCHARAGE
Declares that this product:
« Floor saw »: CS 352 B Code : 70184632546
is in conformity with the following Standards:
•"MACHINES" 2006/42/CE
•"ELECTROMAGNETIC COMPATIBILITY" 2014/30/UE
•"NOISE" 2000/14/CE
And the European standard:
•EN 13862 –Floor cutting-off machines –Safety
Valid for machines as of serial number: 221000014
Storage site for the technical documents:
Saint-Gobain Abrasives 190, Bd. J. F. Kennedy 4930 BASCHARAGE, LUXEMBOURG
This declaration of conformity loses its validity when the product is converted or modified without
agreement.
Bascharage, 15/03/2023.
François Chianese, executive officer and responsible for the technical file.
Bascharage, Luxembourg.
Declaration of conformity

VERS.2023.03.15 CS 352 B_MAN_EN
4
The undersigned manufacturer:
SAINT - GOBAIN ABRASIVES S.A.
190, BD J.F. KENNEDY
L- 4930 BASCHARAGE
Declares that this product:
« Floor saw »: CS 352 B Code : 70184632546
is in conformity with the following standard:
•Supply of Machinery (Safety) Regulations 2008
•Electromagnetic Compatibility Regulations 2016
•Noise Emission in the Environment by Equipment
for use Outdoors Regulations 2001
and European standard:
•EN 13862 –Floor cutting-off machines –Safety
Valid for machines with a serial number greater than: 221000014
Authorised Representative:
SAINT-GOBAIN ABRASIVES
Unicorn House • Unit 1, Amison Close
Redhill Business Park • Stafford • England • ST16 1WB
This declaration of conformity loses its validity when the product is converted or modified without
agreement.
Bascharage, 18/10/2022.
François Chianese, executive officer and responsible for the technical file.
Bascharage, Luxembourg.
Declaration of conformity

VERS.2023.03.15 CS 352 B_MAN_EN
5
CS 352 B
OPERATING INSTRUCTIONS
1BASIC SAFETY INSTRUCTIONS 6
1.1 Symbols 6
1.2 Machine plate 7
1.3 Safety instructions for particular operating phases 8
2GENERAL DESCRIPTION OF THE CS 352 B 9
2.1 Short description 9
2.2 Layout 9
2.3 Technical data 12
2.4 Statement regarding the vibration emission 13
2.5 Statement regarding noise emission 14
3ASSEMBLY AND COMMISSIONING 15
3.1 Assembly 15
3.2 Tool assembly 15
3.3 Quick reference guide for operation 16
3.4 Battery fixation and starting the machine 17
3.5 Charging the battery 18
3.6 Water cooling system 18
4OPERATING THE CS 352 B 19
4.1 Site of work 19
4.2 Cutting method 19
5TRANSPORT AND STORING 20
5.1 Securing for transport 20
5.2 Transport procedure 20
5.3 Long period of inactivity 20
6MAINTENANCE AND SERVICE 21
6.1 Maintenance of the machine 21
6.2 Maintenance of the engine 22
7FAULTS: CAUSES AND CURES 23
7.1 Fault-finding procedures 23
7.2 Trouble-shooting guide 23
7.3 Customer service 24
7.4 Spare parts 25

VERS.2023.03.15 CS 352 B_MAN_EN
6
1 BASIC SAFETY INSTRUCTIONS
The CS 352 B is exclusively designed for the cutting of floors made of asphalt, green and cured
concrete (reinforced or not) as well as of industrial cement.
Uses other than the manufacturer's instructions shall be considered as contravening the
regulations. The manufacturer shall not be held responsible for any resulting damage. Any risk
shall be borne entirely by the user. Observing the operating instructions and compliance with
inspection and servicing requirements shall also be considered as included under use in
accordance with the regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The
following symbols are used on the machine:
Read operator’s instructions
Ear protection must be worn
Hand protection must be worn
Eye protection shall be worn
Cutting depth indicator
Danger: risk of cut

VERS.2023.03.15 CS 352 B_MAN_EN
7
Rotation of the wheel in the indicated
direction lowers the blade
Rotation of the wheel in the indicated
direction raises the blade
Never move the machine with the blade
running idle.
Rotation direction of the blade
Emergency Stop
1.2 Machine plate
Important data can be found on the following plate located on the machine:
Ø Bore
Machine type
Serial number
Power
Safety standard
Machine Model
Machine Code
Blade speed
Weight
Year of
production
ØMaximum
blade

VERS.2023.03.15 CS 352 B_MAN_EN
8
1.3 Safety instructions for particular operating phases
Before commencing work
•Before commencing work, make yourself familiar with the working environment at the place
of use. The working environment includes: obstacles in the area of work and manoeuvre, the
firmness of the floor, necessary protection at the site relating to public thoroughfares and the
availability of help in the event of accidents.
•Check for correct mounting of the blade regularly.
•Immediately remove damaged or badly worn blades, as they endanger the operator whilst
rotating.
•Only fit NORTON diamond blades to the machine! The use of other tools can damage the
machine!
•Attention is drawnto the use of BS2092safety goggles in conformity with specified Processes
No.8 of the Protection of Eyes Regulation 1974, Regulation 2(2) Part 1.
•For security reasons, never leave the machine unattended, untied or unlocked.
While the engine is running
•Do not move the machine whilst the blade is running idle.
•Always cut with the blade guard in position.
•Apply cooling water continuously whilst cutting and in good time!
Battery powered machine
•Always turn off the machine and separate it from the battery before any work on the machine
is done.
•Avoid contact of the electric connections with water projection or humidity.
•In case of emergency, you can stop the machine by pushing on the emergency stop.
•In the event of the machine breaking down or stopping for no apparent reason, switch off the
machine and separate it from the battery. Only a qualified electrician is allowed to investigate
the trouble and remedy the fault.

VERS.2023.03.15 CS 352 B_MAN_EN
9
2 GENERAL DESCRIPTION OF THE CS 352 B
Any modification, which could lead to a change in the original characteristics of the machine, may
be done only by Saint-Gobain Abrasives S.A. who shall confirm that the machine is still in
conformity with the safety regulations. Saint-Gobain Abrasives S.A. keeps the right of making
technical or design modification without prior notification.
2.1 Short description
The Floor Saw CS 352 B you have chosen,is used for small repair works in concrete and asphalt,
for cutting induction loops and installing cables as well as for cutting expansion joints. It can be
used for either wet or dry cutting operations.
Being of small construction, it can be transported in a car or van, the handle can be removed,
reversed or retracted. The water container is also removable.
All component parts on the CS 352 Bare assembled to a high quality standard, ensuring long
life, reliability and a minimum of maintenance.
Special types of blades are available for asphalt, green concrete, cured concrete (reinforced or
not) as well as for industrial cement flooring.
2.2 Layout

VERS.2023.03.15 CS 352 B_MAN_EN
10
Made of jig welded open profile steel, the CS 352 is stable but at the same time, easily
transportable.
The one-piece blade guard (1) fully protects the operator and his working environment. It is firmly
fixed to the main frame but can be opened by rotation to change blades.
A manually operated hand wheel mechanism (2) enables graduated depth setting. Turning the
hand wheel clock- or anti-clockwise will raise or lower the cutting blade.
The handle (3) is detachable or can be reversed for easy transportation. The height is adjustable.
The motor frame (4), supporting the blade shaft, the motor, the blade guard and the belt guard, is
articulated on the rear axle.
1
2
3
4
5
6
7
8
9