Novus NMS NVR 7XE-4U User manual

U s e r ’s ma n ua l
NMS NVR X-4U
NMS NVR X-2U/24/R
NMS NVR X-2U/36/R
NMS NVR X-2U/48/R
NMS NVR X-2U/72/R
NMS NVR X-2U/96/R
NMS NVR 7XE-4U

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
2
INFORMATION
EMC (2004/108/EC) and LVD (2006/95/EC ) Directives
CE Marking
Our products are manufactured to comply with the requirements of the following directives
and national regulations implementing the directives:
 Electromagnetic compatibility EMC 2004/108/EC.
 Low voltage LVD 2006/95/EC with further amendment. The Directive applies to electrical
equipment designed for use with a voltage rating of between 50VAC and as well as 75VDC
and 1500VDC.
WEEE Directive 2012/19/EU
Information on Disposal for Users of Waste Electrical and Electronic Equipment
This appliance is marked according to the European 1000VAC Directive on Waste Electrical and
Electronic Equipment (2002/96/EC) and further amendments. By ensuring this product is disposed of
correctly, you will help to prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of this product.
The symbol on the product, or the documents accompanying the product, indicates that this appliance may not be
treated as household waste. It shall be handed over to the applicable collection point for used up electrical and
electronic equipment for recycling purpose. For more information about recycling of this product, please contact
your local authorities, your household waste disposal service or the shop where you purchased the product.
RoHS Directive 2011/65/EU
Out of concern for human health protection and friendly environment, we assure that our products
falling under RoHS Directive regulations, regarding the restriction of the use of hazardous substances
in electrical and electronic equipment, have been designed and manufactured in compliance with the
above mentioned regulations. Simultaneously, we claim that our products have been tested and do not
contain hazardous substances whose exceeding limits could have negative impact on human health or natural
environment
Information
The device, as a part of professional CCTV system used for surveillance and control, is not designed
for self installation in households by individuals without technical knowledge.
The manufacturer is not responsible for defects and damages that result from improper or inconsistent
with user’s manual installation of the device in the system.

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
3
SAFETY REQUIREMENTS
WARNING!
THE KNOWLEDGE OF THIS MANUAL IS AN INDESPENSIBLE CONDITION OF A
PROPER DEVICE OPERATION. YOU ARE KINDLY REQUSTED TO FAMILIRIZE
YOURSELF WITH THE MANUAL PRIOR TO INSTALLATION AND FURTHER
DEVICE OPERATION.
WARNING!
USER IS NOT ALLOWED TO DISASSEMBLE THE CASING AS THERE ARE NO
USER-SERVICEABLE PARTS INSIDE THIS UNIT. ONLY AUTHORIZED SERVICE
PERSONNEL MAY OPEN THE UNIT
INSTALLATION AND SERVICING SHOULD ONLY BE DONE BY QUALIFIED SERVICE
PERSONNEL AND SHOULD CONFORM TO ALL LOCAL REGULATIONS
WARNING!
PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN
PRODUCT IN USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE
PRODUCT, OR IF IT DOES NOT ARISE FROM THE USUAL APPLICATION OF THE
PRODUCT, MANUFACTURER MUST BE CONTACTED UNDER THE RIGOR OF
EXCLUDING THE MANUFACTURER’S RESPONSIBILITY FOR THE RESULTS OF SUCH AN
ACTION.
IMPORTANT SAFEGUARDS AND WARNINGS
1. Prior to undertaking any action please consult the following manual and read all the safety and
operating instructions before starting the device.
2. Please keep this manual for the lifespan of the device in case referring to the contents of this manual
is necessary;
3. All the safety precautions referred to in this manual should be strictly followed, as they have a
direct influence on user’s safety and durability and reliability of the device;
4. All actions conducted by the servicemen and users must be accomplished in accordance with the
user’s manual;
5. The device should be disconnected from power sources during maintenance procedures;
6. Usage of additional devices and components neither provided nor recommended by the producer
is forbidden;
7. Mounting the device in places where proper ventilation cannot be provided (e. g. closed lockers
etc.) is not recommended since it may lead to heat build-up and damaging the device itself
as a consequence;
8. Mounting the camera on unstable surface or using not recommended mounts is forbidden.
Improperly mounted camera may cause a fatal accident or may be seriously damaged itself. The
camera must be mounted by qualified personnel with proper authorization, in accordance with this
user’s manual;

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
4
SAFETY REQUIREMENTS
9. Device should be supplied only from a power sources whose parameters are in accordance with
those specified by the producer in the camera technical datasheet. Therefore, it is forbidden to supply
the camera from a power sources with unknown parameters, unstable or not meeting producer’s
requirements;
10. Signal cables (conducting TV or / and telemetric signal) should be placed in a way excluding the
possibility of damaging them by accident. Special attention must be paid to cables getting from the
camera and connecting the power supply;
11. To avoid equipment damage, whole TV circuit should be equipped with properly made
discharge-, overload- and lightning protection devices. Usage of separating transformers is
advised;
12. Electric installation supplying the device should be designed to meet the specifications given
by the producer in such a way that overloading is impossible;
13. User cannot repair or upgrade the equipment himself. All maintenance actions and repairs should
be conducted only by qualified service personnel;
14. Unplug the camera from the power source immediately and contact the proper maintenance
department when the following occurs:
 Damages to the power cord or to the plug itself;
 Liquids getting inside the device or exposure to strong mechanical shock;
 Device behaves in a way not described in the manual and all adjustments approved by the
manufacturer and possible to apply by user himself, seem not to have any effect;
 Camera is damaged;
 Atypical behaviour of the camera components may be seen (heard).
15. In necessity of repairs attention to using only original replacement parts (with their parameters
in accordance with those specified by the producer) should be paid. Non-licensed service and
non-genuine replacement parts may cause fire or electrocution;
16. After maintenance activities tests should be run to ensure proper operation of all the functional
components of the device.
WARNING!
PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN PRODUCT IN
USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE PRODUCT, OR IF IT DOES
NOT ARISE FROM THE USUAL APPLICATION OF THE PRODUCT, MANUFACTURER MUST BE
CONTACTED UNDER THE RIGOR OF EXCLUDING THE MANUFACTURER’S RESPONSIBILITY FOR
THE RESULTS OF SUCH AN ACTION
Attention!
Technical changes reserved without prior notice and printing errors possible.

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
5
1. PACKAGE CONTENTS
Unpack the device carefully. After unpacking, please ensure that package contains the following
items:
 NMS NVR
 Power cord
 PC mouse and keyboard
 User manual
If any of the elements has been damaged during transport, pack all the elements back into the original
packaging and contact your supplier.
2. MAIN CHARACTERISTICS
NVR X-4U , NVR X-2U/xx/R
 up to 110 channels (video + audio)
 Recording speed up to 3300fps
 Supported resolution up to 3072 x 2048
 Up to 3 monitors simultaneously
 Available mount 8 HDDs for recordings in (NVR X-4U)
 Build in 12 HDDsfor recordings (NVR X-2U/xx/R), RAID, pr otects the recorded material
 Quick start up due to SSD hard drive
 Operating system: Microsoft Windows Embedded 8
 Recording and surveillance system: NMS
 Compatible with all NOVUS IP cameras
NVR 7XE-4U
 up to 75 channels (video + audio)
 Recording speed up to 2250 fps
 Supported resolution up to 3072 x 2048
 Up to 3 monitors simultaneously
 Available mount 4 HDDs for recordings
 Quick start up due to SSD hard drive
 Operating system: Microsoft Windows Embedded 8
 Recording and surveillance system: NMS
 Compatible with all NOVUS IP cameras
FOREWORD INFORMATION

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
6
3.1 NMS NVR X-4U/XX
TECHNICAL DATA
NVR X-4U
VIDEO AND AUDIO
Network Camera up to 110 channels in resolution 1280 x 720 (video + audio)
Camera/Protocol support NOVUS, RTSP
Monitor Output Main (split screen, full screen, sequence): 1 x HDMI, 2 x DVI , 1 x Display Port (up to 3 simultaneously)*
Audio Output 1 x Line out (jack 3,5mm), 1 x HDMI, 1 x optical S/PDIF
Dualstreaming support Yes
RECORDING
Compression H.264, MJPEG
Resolution Up to 3072 x 2048
Speed
Up to 3300 fps (110 channels x 30 fps for 1280 x 720)
Up to 2400 fps (80 channels x 30 fps for 1920 x 1080)
Up to 1200 fps (80 channels x 15 fps for 2048 x 1536)
Up to 960 fps (80 channels x 12 fps for 2592 x 1944)
Up to 600 fps (40 channels x 15 fps for 3072 x 2048)
Streams Size Up to 250Mb/s for all cameras
Recording Mode Time-lapse, Event (Alarm, Motion detection), Manual
Schedule Individual settings for: each day, each hour, each camera,
possibility of combining individual recording modes
Prealarm/postalarm 0 s - 30 s / 0 s - 600 s
DISPLAY
Resolution Up to 3072 x 2048
Speed
Up to 1080 fps (36 channels x 30 fps for 1280 x 720 at recording 110 channels)**
Up to 1350 fps (45 channels x 30 fps for 1920 x 1080 at recording 80 channels)**
Up to 900 fps (60 channels x 15 fps for 2048 x 1536 at recording 80 channels)**
Up to 720 fps (60 channels x 12 fps for 2592 x 1944 at recording 80 channels)**
Up to 450 fps (30 channels x 12 fps for 3072 x 2048 at recording 40 channels)**
PLAYBACK
Speed
Up to 480 fps (16 channels x 30 fps for 1280 x 720)
Up to 270 fps (9 channels x 30 fps for 1920 x 1080)
Up to 135 fps (9 channels x 15 fps for 2048 x 1536)
Up to 108 fps (9 channels x 12 fps for 2592 x 1944)
Up to 135 fps (9 channels x 15 fps for 3072 x 2048)
Recorded Data Search By date/time, events (Alarm, Motion detection, “Text-in”, System events)
BACKUP
Methods USB port (HDD or Flash memory), network
File Format AVI, NMS
STORAGE
Internal HDD 1 x HDD 2,5” SATA SSD for system
Available mount: 8 x HDD 3,5” 24/7 for recordings
ALARM
Camera Input/Output Support camera’s alarm input***
Motion Detection Support camera’s motion detection***
System Reaction to Alarm Events Buzzer, E-mail with attachment,SMS, output activation, screen message, recording activation, PTZ function,
NETWORK
Network Interface 2 x Ethernet - socket RJ-45, 10/100/1000 Mbit/s
Network Protocols Support RTSP, HTTP, TCP/IP, IPv4, UPNP, UDP, SMTP, NTP, DHCP, DNS, FTP
PC Software NMS, Internet Explorer
Max. Bandwidth Up to 250Mb/s for all client workstations
PTZ
Functions Pan, tilt, zoom, preset ***
AUXILIARY INTERFACES
USB 2 x USB 3.0
10 x USB 2.0

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
7
TECHNICAL DATA
*- In case of using more than two monitors it is required to use Display Port output.
**- with dual streaming support.
***- Function capability depends on camera models and communication protocol.
OPERATING SYSTEM
Operating system Microsoft Windows Embedded 8
Recording and surveillance system NMS
Operating mode pentaplex
OSD Polish, English, Russian and others
Control PC mouse and keyboard (in-set included), network
System Diagnostic Automatic control of HDDs, network, network cameras lost
Security Password protections, IP filtering, connection limit
INSTALLATION PARAMETERS
Dimensions (mm) 452 (height) x 178 (width) x 648 (depht) - Rack 19” 4U
Weight 28 kg
Power Supply Build in PSU 230 VAC/665W
Operating Temperature 5 °C ~ 35 °C

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
8
3.2 ELECTRICAL CONNECTOR AND OTHER ELEMENTS FRONT/BACK PANEL
NVR X-4U
(A) Power cord connector 230V
(B) PS2 (keyboard) connector
(C) USB connectors
(D) Gigabit Ethernet LAN connectors
(E) Audio Mini-JACK connectors and optical connector
(F) Fans hot-swap
(G) DVI Dual Link video connector
(H) Micro HDMI video connector
(I) Display Port video connector
TECHNICAL DATA
A
C
D
E
F
GI
B
H

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
9
TECHNICAL DATA
(J) USB connectors
(K) Reset button
(L) on/off button
(M) Driver bays
J
K
L
M
M

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
10
TECHNICAL DATA
NMS NVR X-2U/XX/R
VIDEO AND AUDIO
Network Camera up to 110 channels in resolution 1280 x 720 (video + audio)
Camera/Protocol support NOVUS, RTSP
Monitor Output Main (split screen, full screen, sequence): 1 x mmicroHDMI, 2 x DVI , 1 x Display Port (up to 3
simultaneously)*
Audio Output 1 x Line out (jack 3,5mm), 1 x HDMI, 1 x optical S/PDIF
Dualstreaming support Yes
RECORDING
Compression H.264, MJPEG
Resolution Up to 3072 x 2048
Speed
Up to 3300 fps (110 channels x 30 fps for 1280 x 720)
Up to 2400 fps (80 channels x 30 fps for 1920 x 1080)
Up to 1200 fps (80 channels x 15 fps for 2048 x 1536)
Up to 720 fps (60 channels x 12 fps for 2592 x 1944)
Up to 600 fps (40 channels x 15 fps for 3072 x 2048)
Streams Size Up to 250Mb/s for all cameras
Recording Mode Time-lapse, Event (Alarm, Motion detection), Manual
Schedule Individual settings for: each day, each hour, each camera,
possibility of combining individual recording modes
Prealarm/postalarm 0 s - 30 s / 0 s - 600 s
DISPLAY
Resolution Up to 3072 x 2048
Speed
Up to 1080 fps (36 channels x 30 fps for 1280 x 720 at recording 110 channels)**
Up to 1350 fps (45 channels x 30 fps for 1920 x 1080 at recording 80 channels)**
Up to 900 fps (60 channels x 15 fps for 2048 x 1536 at recording 80 channels)**
Up to 720 fps (60 channels x 12 fps for 2592 x 1944 at recording 80 channels)**
Up to 450 fps (30 channels x 12 fps for 3072 x 2048 at recording 80 channels)**
PLAYBACK
Speed
Up to 480 fps (16 channels x 30 fps for 1280 x 720)
Up to 270 fps (9 channels x 30 fps for 1920 x 1080)
Up to 135 fps (9 channels x 15 fps for 2048 x 1536)
Up to 108 fps (9 channels x 12 fps for 2592 x 1944)
Up to 135 fps (9 channels x 15 fps for 3072 x 2048)
Recorded Data Search By date/time, events (Alarm, Motion detection, “Text-in”, System events)
BACKUP
Methods USB port (HDD or Flash memory), network
File Format AVI, NMS
STORAGE
Internal HDD
1 x HDD 2,5” SATA SSD for system
12 x HDD 3,5” SAS 24/7 server for recordings
RAID level 5
ALARM
Camera Input/Output Support camera’s alarm input***
Motion Detection Support camera’s motion detection***
System Reaction to Alarm Events Buzzer, E-mail with attachment,SMS, output activation, screen message, recording activation, PTZ function,
NETWORK
Network Interface 2 x Ethernet - socket RJ-45, 10/100/1000 Mbit/s
Network Protocols Support RTSP, HTTP, TCP/IP, IPv4, UPNP, UDP, SMTP, NTP, DHCP, DNS, FTP
PC Software NMS, Internet Explorer
Max. Bandwidth Up to 250Mb/s for all client workstations
PTZ
Functions Pan, tilt, zoom, preset ***
AUXILIARY INTERFACES
USB 2 x USB 3.0
10 x USB 2.0
3.3 NMS NVR X-2U/XX/R

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
11
TECHNICAL DATA
*- In case of using more than two monitors it is required to use Display Port output.
**- with dual streaming support.
***- Function capability d pends on camera models and communication protocol.
OPERATING SYSTEM
Operating system Microsoft Windows Embedded 8
Recording and surveillance system NMS
Operating mode pentaplex
OSD Polish, English, Russian and others
Control PC mouse and keyboard (in-set included), network
System Diagnostic Automatic control of HDDs, network, network cameras lost
Security Password protections, IP filtering, connection limit
INSTALLATION PARAMETERS
Dimensions (mm) 89 (height) x 437 (width) x 508 (depht) - Rack 19” 2U
Weight 28 kg
Power Supply Build in 2 redundant PSU 230 VAC/920W each.
Operating Temperature 10 °C ~ 35 °C
Information!!
Size of the space to be registered is different from the declared value. The space can be expected in
the following manner. Capacity 3TB hard drive multiplied by the number of disks, ie. 12 subtract
one 3TB drive on the checksums for RAID 5 and subtract approximately 9% in capacity of 11
drives.
Formula:
Capacity = nHDD-nR-9%
nHDD = number of disks embedded
nR = number of disks r equir ed for the RAID checksum
9% = constant coefficient of the surface is not available on the disc.
12x3TB-3TB-9% = 30TB of physical space for records.
NVR X-2U/XX/R
Product group recorders NVR
Class recorders and the type of
housing X is the top model in a
2U chassis size.
XX indicates the size
of the space for the
registration. Depend-
ing on the model it
can be a 24TB, 36TB,
48TB, 72TB, 96TB.
R means an additional
RAID controller
working in the 5th level
of security.

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
12
TECHNICAL DATA
3.4. ELECTRICAL CONNECTORS AND OTHER ELEMENTS OF THE FRONT PANEL
NVR X-2U/XX/R
(A) on/off button
(B) Reset button
(C) LED indicator
(D) Driver bays , 12 pieces
B
D
CA

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
13
TECHNICAL DATA
3.4 ELECTRICAL CONNECTORS AND OTHER ELEMENTS REAR PANEL
NVR X-2U/XX/R
(E) Power cord connectors 230V
(F) Drive bays
(G) PS2 (keybord) connector
(H) USB 2.0 connectors
(I) USB 3.0 connectors
(J) Gigabit Ethernet LAN connectors
(K) Audio Mini-JACK connectors and optical connector
(L) Display Port vidoe connector
(M) Micro HDMI connector
(N) DVI video connector
FGH
I
JK
N
EM
N
M
N
M
L
F

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
14
3.5 NMS NVR 7XE-4U
TECHNICAL DATA
NMS NVR 7XE-4U/XX
VIDEO AND AUDIO
Network Camera up to 75 channels in resolution 1280 x 720 (video + audio)
Camera/Protocol support NOVUS, RTSP
Monitor Output Main (split screen, full screen, sequence): 1 x HDMI, 2 x DVI , 1 x Display Port (up to 3 simultaneously)*
Audio Output 1 x Line out (jack 3,5mm), 1 x HDMI, 1 x optical S/PDIF
Dualstreaming support Yes
RECORDING
Compression H.264, MJPEG
Resolution Up to 3072 x 2048
Speed
Up to 2250 fps (75 channels x 30 fps for 1280 x 720)
Up to 1800 fps (60 channels x 30 fps for 1920 x 1080)
Up to 900 fps (60 channels x 15 fps for 2048 x 1536)
Up to 720 fps (60 channels x 12 fps for 2592 x 1944)
Up to 450 fps (30 channels x 15 fps for 3072 x 2048)
Streams Size Up to 250Mb/s for all cameras
Recording Mode Time-lapse, Event (Alarm, Motion detection), Manual
Schedule Individual settings for: each day, each hour, each camera,
possibility of combining individual recording modes
Prealarm/postalarm 0 s - 30 s / 0 s - 600 s
DISPLAY
Resolution Up to 3072 x 2048
Speed
Up to 2250 fps (75 channels x 30 fps for 1280 x 720 at recording 75 channels)**
Up to 1800 fps (60 channels x 30 fps for 1920 x 1080 at recording 60 channels)**
Up to 900 fps (60 channels x 15 fps for 2048 x 1536 at recording 60 channels)**
Up to 720 fps (60 channels x 12 fps for 2592 x 1944 at recording 60 channels)**
Up to 450 fps (30 channels x 15 fps for 3078 x 2048 at recording 30 channels)**
PLAYBACK
Speed
Up to 480 fps (16 channels x 30 fps for 1280 x 720)
Up to 270 fps (9 channels x 30 fps for 1920 x 1080)
Up to 135 fps (9 channels x 15 fps for 2048 x 1536)
Up to 108 fps (9 channels x 12 fps for 2592 x 1944)
Up to 135 fps (9 channels x 15 fps for 3072 x 2048)
Recorded Data Search By date/time, events (Alarm, Motion detection, “Text-in”, System events)
BACKUP
Methods USB port (HDD or Flash memory), network
File Format AVI, NMS
STORAGE
Internal HDD 1 x HDD 2,5” SATA SSD for system
Available mount 5 x HDD 3,5” SATA 24/7 for recordings
ALARM
Camera Input/Output Support camera’s alarm input***
Motion Detection Support camera’s motion detection***
System Reaction to Alarm Events Buzzer, E-mail with attachment,SMS, output activation, screen message, recording activation, PTZ function
NETWORK
Network Interface 2 x Ethernet - socket RJ-45, 10/100/1000 Mbit/s
Network Protocols Support RTSP, HTTP, TCP/IP, IPv4, UPNP, UDP, SMTP, NTP, DHCP, DNS, FTP
PC Software NMS, Internet Explorer
Max. Bandwidth Up to 250Mb/s for all client workstations
PTZ
Functions Pan, tilt, zoom, preset ***
AUXILIARY INTERFACES
USB 4 x USB 3.0
6 x USB 2.0

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
15
TECHNICAL DATA
*- In case of using more than two monitors it is required to use Display Port output.
**- with dual streaming support.
***- Function capability depends on camera models and communication protocol, for details please check full user manual.
OPERATING SYSTEM
Operating system Microsoft Windows Embedded 8
Recording and surveillance system NMS
Operating mode pentaplex
OSD Polish, English, Russian and others
Control PC mouse and keyboard (in-set included), network
System Diagnostic Automatic control of HDDs, network, network cameras lost
Security Password protections, IP filtering, connection limit
IINSTALLATION PARAMETERS
Dimensions (mm) 180 (H) x 483 (W) x 508 (L) - Rack 19” 4U
Weight 19 kg
Power Supply Build in PSU 230 VAC/700W
Operating Temperature 5 °C ~ 35 °C
O
P
R
S
T
3.6 Front panel NVR 7XE-4U view (after opening the cover)
(O) Reset button
(P) USB connectors
(R) on/off button
(S) LEDs indicator
(T) Lock the front flap

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
16
3.6 Rear panel NVR 7XE-4U/XX view
(A) Power button
(B) Power cord connector230V
(C) USB 2.0 connectors
(D) DVI video (no active)
(E) HDMI video (no active)
(F) SPDIF optical connector
(G) USB 3.0 connectors
(H) Gigabit Ethernet LAN connectors
(I) Audio Mini-JACK connectors
(J) DVI video connector
(K) HDMI video connector
(L) DisplayPort video connector
(M) DVI video connector
(N) Gigabit Ethernet LAN connector
TECHNICAL DATA
A
BCD
E
FH
G
I
JM
M
K
L
N

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
17
4. INSTALLATION, AND RUNNING DEVICE
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it from a
location with lower ambient temperature is forbidden, as the condensing water vapour may cause
short-circuits and damage the device as a result.
To install the device place it in rack-mount and tighten the screws.
PC Keyboard and mouse connect to USB port. Connect the monitor to graphic card depending
on prefered cable and type of connector .
Integrated graphic card is unavailable. In case of using more than two monitors it is required to
use Display Port output for connection one of them. Another two can be connected to DVI or HDMI
port. Connect the LAN cable to ethernet port. Description how to change IP address is given in
chapter 6.4.1. After connection device could be launched. Set the power button to I, then press the
power button located at the front panel. Please wait until operating system starts and displays main
screen.
INSTALLATION, AND RUNNING DEVICE

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
18
FIRST LAUNCH
5. FIRST LAUNCH
CAUTION! English is default language. For changing the language follow the steps described
further in this chapter.
First launch requires additional action. User will be asked to change the administrator password for
security reasons. Default login/password is:
login: root password: pass
Information box will be displayed. Press the OK buttton.
Enter new password and Confirm typying it again. Press the OK buttton.

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
19
Main screen will be displayed, and login window to NMS application (Novus Management System),
which is is a professional solution for video monitoring based on TCP/IP CLIENT-SERVER
networks. (full description in chapter 6.1).
After login as User: „root” and predefined Password:
- press the Log in button to run NMS (full description in chapter 6.1).
- press the Turn off button to close NMS and show the main screen (description in chapter 6)
- press the X button in right upper corner to close this window without entering the password. It
allows to use main screen without closing NMS application. Login window could be also „moved”
from the center to the sideways to uncover the main screen.
To change the language setting follow these steps: On the main screen click the NMS management.
Access is password protected. Login as user: „root” and enter the password. Confirm by clicking
Log in.
FIRST LAUNCH
1
2

NMS NVR X-4U, NVR X-2U/XX/R, NVR 7XE-4U - 1.3 version - User’s manual
All rights reserved © AAT Holding S.A.
20
LOGIN
From the NMS Management list choose the Language. It displays the list with available languages.
Choose the prefered one and confirm by clicking OK.
Changing the language on the main screen will be applied immediately. Changing the language in the
NMS will be introduced after the restarted of the application or the NVR.
5. LOGIN
For security reasons, access to the main screen options, such as NMS management and System
configuration r equir es an additional login. Access to these options is assigned only to an
administrator account "root". Access from other accounts with administrator privileges is restricted.
The default login is:
user: root password: pass.
However, with the first launch the NVR user will be asked to change the password for the root user.
6. MAIN SCREEN
Mentioned in the previous chapter, the main screen is a desktop containing: menu, volume
control, and a clock. In the lower right corner there is a button closing / restarting the NVR. The
version of the application NMS (SW) and the version of the system (FW) is displayed in the bottom
left corner. At the bottom of the desktop is also a field indicating the status of NMS. Possible statuses
are: "Starting", "Running", "Closing", "Stopped".