
NTI HDMI Splitter
1
INTRODUCTION
The VOPEX-HDS-x HDMI splitter (x= 2, 4, 8 or 16) enables HDMI displays (monitors, HDTV (LCD, PDP), projectors) to be driven
by a single digital HDMI source (PC, Cable box, DVD player, Satellite receiver) with no loss of signal. The VOPEX-HDS-x is
available with 2,4,8 or 16 output ports.
Features:
•Ideal for presentations.
•Connects HDTV or computer HD video source to multiple HDTV compatible displays or projectors.
•Supports PC resolution up to 1920x1200; video formats 480i/p, 576i/p,720i/p and 1080i/p
•Distributes digital HDMI signal to two, four, eight, or sixteen displays simultaneously.
•No distortion or attenuation of the signal.
•Full DDC2B communications are support.
•Supports an HDMI or DVI monitor. (DVI requires optional adapter cable- see page 2)
•HDMI 1.3a, HDCP 1.2 compliant
Supports:
•x.v.Color
•12-bit Deep Color
•Dolby Digital and DTS
•Dolby TrueHD and DTS-HD Master Audio
•Pixel clocks 225 MHz
•Data rates to 6.75 Gbps
MATERIALS
Materials Supplied with this kit:
•NTI VOPEX-HDS-2/4/8/16 HDMI Splitter
•100VAC to 240VAC at 50 or 60Hz-5VDC/3.0A AC Adapter (2, 4 and 8 port models only)
•Line cord, country specific (16 port model only)
•HD-3-MM 3 foot HDMI video interface cable
•This owners manual
Materials Not supplied but REQUIRED:
•An HD-xx-MM HDMI male-to-male cable for each display to be connected to the splitter. Cables are available from NTI
where x= 3, 6, 14, 20, 30,50,75, 100 and 150 feet.
Also available from NTI are DVI-HD-x-MM DVI-D Single link male to HDMI male cables (where x- 3, 6, 10, and 15 feet)
Cables can be purchased from Network Technologies Inc by calling (800) 742-8324 (800-RGB-TECH) in the US and Canada or
(330) 562-7070 (worldwide).