REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
SPECIFICATION SHEET
Broan-NuTone LLC, 926 West State Street, Hartford, Wisconsin 53027 (1-800-637-1453)
FAN-FORCED
WALL HEATERS
60K 99041273F
TYPICAL SPECIFICATION
Heater shall be Broan Model 165F, (167F), (170), (170F),
(174), (174F), (178), (178F).
Unit shall have steel housing finished with black, epoxy
paint. It will be recessed (surface) - mounted.
Heater to deliver 500, (750), (1000), (1500), (2000) watts of
fan-forced heat at safe "black" temperatures. It must be
wattage-convertible or voltage-selectable. Heater shall in-
clude a thermal overload protector with manual reset.
Grille will be White in color and be of 20-gauge, one-piece
construction with no sharp edges. Unit to be controlled with
front-mount thermostat, (Model 86W - Line-Voltage Thermo-
stat), (Model 59V, 59W-60 Minute Timer), (Model 61V, 61W-
15-Minute Timer).
Heater shall be U.L. Listed.
ACCESSORIES: (Purchase separately)
•Model 84 Surface-Mounting Kit
•Model 86W Line-Voltage Thermostat
•
Model 59V, 59W 60-Minute Timer
•
Model 61V, 61W 15-Minute Timer
•
Model 83 Integral Thermostat (Use with 165F, 167F, 170F,
174F or 178F Finish assemblies when built-in control is
desired)
Broan brings the "designer" look to wall heaters in
a wide choice of performance and finish options.
FEATURES
GRILLE:
•Designer-styled, one-piece construction with rounded
corners
•White, baked enamel finish
•20-gauge, with downflow louvers
•Front-mounted thermostat
•Color-coordinated mounting screws and thermostat knob
HEATER ASSEMBLY:
•Nickel-chrome resistance alloy heating element
•Mica insulated, zig-zag element configuration
•
Snap-action, bi-metallic thermostat
•
120 VAC units can be converted to operate on 240 VAC
•
Wattage convertible (except 165F)
•Manual reset thermal overload protector
•Permanently lubricated motor
•High-efficiency blower wheel
•Removable from housing for cleaning or servicing
HOUSING:
•24-gauge steel finished with black expoxy paint
•Removable wiring cover - connect wiring away from tight
corners
•
Mounts directly to wall studs
•
Can be recess or surface-mounted (surface mounting
requires Model 84 kit)
•
Includes housing mask - to prevent construction damage to
roughed-in heater
Model 171H: Rough-in housing for use with finish assem-
blies
Models 165F, 167F, 170F, 174F, 178F: Finish assemblies
for use with 171H rough-in housing
Models 165FT, 167FT, 170FT, 174FT, 178FT: Finish as-
semblies for use with 171H rough-in housing (Includes built-
in thermostat)
NOTE: This heater is intended to be used to supply supplemen-
tal heat from a wall location in new or existing construction.
