Nvidia TESLA K10 User manual

BD-06280-001_v05 | June 2012
Board Specification
TESLA K10 GPU ACCELERATOR

Tesla K10 GPU Accelerator BD-06280-001_v05 | ii
DOCUMENT CHANGE HISTORY
BD-06280-001_v05
Version Date Authors Description of Change
01 April 10, 2012 GG, SM Preliminary Information (Information contained
within this board specification is subject to
change)
02 April 11, 2012 GG, SM •
Updated board length
•Updated “Overview” section
•Updated Table 4
03 May 14, 2012 GG, SM •Removed “Preliminary Information” statement as
this board specification is no longer considered
preliminary
•Updated title to Tesla K10 GPU Accelerator
Board Specification
•Updated number of core processors
•Updated Figure 2 and Figure 3
04 May 21, 2012 GG, SM Removed NDA and confidential statements from
document
05 June 22, 2012 GG, SM Updated the “Standard I/O Connector Placement”
section with steps on removing the bracket

Tesla K10 GPU Accelerator BD-06280-001_v05 | iii
TABLE OF CONTENTS
Overview ........................................................................................... 1
Key Features..................................................................................... 1
Tesla K10 Block Diagram....................................................................... 2
Configuration .................................................................................... 3
Mechanical Specifications....................................................................... 4
PCI Express System ............................................................................. 4
Standard I/O Connector Placement .......................................................... 5
Internal Connectors and Headers............................................................. 7
External PCI Express Power Connectors .................................................. 7
Power Specifications............................................................................11
Support Information.............................................................................12
Certificates and Agencies.....................................................................12
Agencies......................................................................................12
Languages.......................................................................................13

Tesla K10 GPU Accelerator BD-06280-001_v05 | iv
LIST OF FIGURES
Figure 1. Tesla K10 Block Diagram ............................................................ 2
Figure 2. Tesla K10 GPU Accelerator.......................................................... 4
Figure 3. Tesla K10 Bracket .................................................................... 5
Figure 4. Tesla K10 with Bracket .............................................................. 6
Figure 5. Tesla K10 without Bracket .......................................................... 6
Figure 6. 6-Pin PCI Express Power Connector................................................ 8
Figure 7. 8-Pin PCI Express Power Connector................................................ 9
LIST OF TABLES
Table 1. Board Configurations................................................................. 3
Table 2. 6-Pin PCI Express Power Connector Pinout ......................................10
Table 3. 8-Pin PCI Express Power Connector Pinout ......................................10
Table 4. Configuration with External PCI Express Connectors...........................11
Table 5. Languages Supported ...............................................................13

Tesla K10 GPU Accelerator BD-06280-001_v05 | 1
OVERVIEW
The NVIDIA®Tesla®K10 graphics processing unit (GPU) accelerator is a PCI Express,
double-wide, full height (4.376 inches by 10.5 inches by 1.52 inches) form factor
computing module comprising two NVIDIA GK104 GPUs. The Tesla K10 offers a total
of 8 GB of GDDR5 on-board memory (4 GB per GPU) and supports PCI Express Gen3.
The Tesla K10 can be configured by the OEM or by the end user to enable or disable
ECC or error correcting codes that can fix single-bit errors and detect double-bit errors.
Enabling ECC will cause some of the memory to be used for the ECC bits, so the user
available memory will decrease by 10%. On the Tesla K10 the ECC protection is for
DRAM only.
KEY FEATURES
GPU
The Tesla K10 GPU accelerator has two GK104 GPUs. Characteristics for both GPUs are
as follows:
Number of processor cores: 1536 per GPU
Processor core clock: 745 MHz
Package size: 40 mm × 40 mm 1745-pin ball grid array (BGA)
Board
PCI Express Gen3 ×16 system interface
Physical dimensions: 4.376 inches × 10.5 inches, dual-slot
Board power: 225 W

Overview
Tesla K10 GPU Accelerator BD-06280-001_v05 | 2
External Connectors
None
Internal Connectors and Headers
One 6-pin PCI Express power connector
One 8-pin PCI Express power connector
Memory
Memory clock: 2.5 GHz
Interface: 256-bit
●Total board memory: 8 GB (4 GB per GPU)
●32 pieces of 128M × 16 GDDR5, SDRAM (per GPU)
BIOS
2Mbit Serial ROM
TESLA K10 BLOCK DIAGRAM
Figure 1 is the block diagram for Tesla K10 GPU accelerator. It comprises two identical
GK104 GPUs, each with 4 GB of GDDR5 memory. The GPUs are connected via a PCI
Express switch. The board supports PCI Express Gen3.
Figure 1. Tesla K10 Block Diagram

Overview
Tesla K10 GPU Accelerator BD-06280-001_v05 | 3
CONFIGURATION
The Tesla K10 boards are available in the following configurations (Table 1) based on the
orientation of the airflow inside the system.
Table 1. Board Configurations
Specifications Tesla K10
Generic SKU reference •
900-22055-0010-000: Airflow towards the bracket
•900-22055-0020-000: Airflow away from the bracket
Chip 2× GK104
Package size GPU 42.5 mm × 42.5 mm 1981-pin ball grid array (BGA)
Processor clock 745 MHz
Memory clock 2.5 GHz
Memory size 4 GB per GPU (8 GB per board)
Memory I/O 256-bit GDDR5
Memory configuration 32 pieces of 128M × 16 GDDR5 SDRAM
External connectors None
Internal connectors and headers •8-pin PCI Express power connector
•6-pin PCI Express power connector
Board power 225 W

Tesla K10 GPU Accelerator BD-06280-001_v05 | 4
MECHANICAL SPECIFICATIONS
PCI EXPRESS SYSTEM
The Tesla K10 boards (Figure 2) conform to the PCI Express full height (4.376 inches by
10.5 inches) form factor. Figure 2 is shown without the bracket.
Figure 2. Tesla K10 GPU Accelerator

Note: The final product will ship with an 8 and 6-pin connector and shroud.
10.5 inches
4.376 inches

Mechanical Specifications
Tesla K10 GPU Accelerator BD-06280-001_v05 | 5
STANDARD I/O CONNECTOR PLACEMENT
As shown in Figure 3, the Tesla K10 includes a vented bracket. If you are an OEM who
qualifies for bracket modifications, you have the option of receiving your modules with
no bracket installed.
Figure 3. Tesla K10 Bracket

Mechanical Specifications
Tesla K10 GPU Accelerator BD-06280-001_v05 | 6
If you need to remove the standard bracket follow these simple steps:
1. Remove the two shoulder screws on the back side of the PCB.
2. Remove the two flat head screws on the bracket exhaust face.
3. Remove the bracket.
4. Slide the washer in between the PCB and the backplate to maintain clearance
between the PCB and the backplate.
5. Attach the shoulder screws.
Figure 4. Tesla K10 with Bracket
Figure 5. Tesla K10 without Bracket