NXP Semiconductors FRDM-KW40Z User manual

Quick Reference
FRDM-KW40Z
FREEDOM DEVELOPMENT BOARD

Quick Reference
GET TO KNOW THE FRDM-KW40Z BOARD
Figure 1: FRDM-KW40Z Board Components Figure 2: FRDM-KW40Z Board Connectors
SMA
Connector
TSI Buttons
SW1-SW2
Push Buttons
SW3-SW4
Application
LEDs (4)
FXOS8700CQ
(Accel+MAG)
J1 Header
External Flash
Memory
KW40Z SWD
J2 Header
OpenSDA
MCU
PSWITCH RESET
USB
OpenSDA
Printed
F-Antenna
J4 Header
32 MHz Crystal
32 kHz Crystal
KW40Z
10uH DCDC
Inductor
J3 Header
Infrared LED
Power On LED
OpenSDA JTAG 20-PTC0
18-PTC1
16-P3V3
14-GND
12-PTC16
10-PTC17
8-PTC18
6-PTC19
4-PTA1
2-PTA0
16-PTB3
14-PTB2
12-PTA18
10-PTA19
8-PTA17
6-PTA16
4-PTC6
2-PTC7
2-PTC4
4-P3V3
6-RESET
8-P3V3
10-P5V_USB
12-GND
14-GND
16-P5-9V_VIN
2-PTB17
4-PTB16
6-PTB1
8-PTC5
12-PTC3
10-PTC2

HOW TO GET STARTED
www.nxp.com
Figure 2: FRDM-KW40Z Board Connectors
1. Connect the FRDM-KW40Z board to a
PC using the included micro-USB cable
to the USB OpenSDA connector of the
FRDM-KW40Z.
2. Your FRDM-KW40Z LEDs should start
flashing in serial mode when you connect the board.
3. Explore other out-of-box demos and get software & tools at:
www.nxp.com/FRDM-KW40Z/startnow
4. Enjoy your design freedom with the FRDM-KW40Z.
www.nxp.com
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their
respective owners. © 2016 NXP B.V.
Document Number: FRDMKW40ZQRC REV 1
Agile Number: 926-28379 REV B