OAKWORKS Celesta User manual

OAKWORKS®
Celesta®and Clodagh Gemini
USER MANUAL
www.OAKWORKS.com · 717.235.6807
Clodagh Gemini
4-Section Electric
Salon Top
Celesta®
4-Section Electric
Salon Top
Celesta®
1-Section Flat Top
Clodagh Gemini
1-Section Flat Top

© Copyright 2021
OAKWORKS®, Inc.
Printed in U.S.A.
All rights are reserved. No part
of this document may be
photocopied, reproduced or
translated to another language
without prior written consent
of OAKWORKS®, Inc.
OAKWORKS®is a registered
trademark of OAKWORKS®, Inc.
Notice
The information contained within
this document is subject to change
without notice and should not
be construed as a commitment by
OAKWORKS®, Inc.
OAKWORKS®, Inc. encourages
requests for technical specifica-
tions and the like documentation to
ensure accuracy. The appropriate
documentation is available upon
request.
OAKWORKS®, Inc. shall not be
liable for incidental or consequen-
tial damages in connection with or
arising out of the furnishing, per-
formance, or use of this document
and the program material which it
describes.

TABLE OF CONTENTS
Important Safety Instructions
Product Use Description...................................................................................... 1
Symbol Identification ........................................................................................... 1
Important Safety Instructions............................................................................ 1-2
Product Description & Photo
Celesta 4-Section Electric Salon ......................................................................... 3
Controls Operations - Electric Salon.................................................................... 4
Clodagh Gemini 4-Section Electric Salon ............................................................ 5
Controls Operations - Flat Top ............................................................................ 6
Celesta 4-Section Electric Salon ......................................................................... 7
Controls Operations - Electric Salon.................................................................... 8
Clodagh Gemini 4-Section Electric Salon ............................................................ 9
Controls Operations - Flat Top .......................................................................... 10
Installation
Grounding ......................................................................................................... 11
Table Keyswitch ................................................................................................ 11
Under Table Cabinet & In-Cabinet Power Strip.................................................. 12
Important Safety Note ....................................................................................... 12
Directions for Use
Levelling Instructions......................................................................................... 13
Moving the Table............................................................................................... 13
Removing Top Pad............................................................................................ 14
Adjustable Body Comfort (ABC) System Use (Option)....................................... 15
Integrated Heated Top (Option)......................................................................... 16
QuickLock Face Rest: (Accessory Option)......................................................... 17
Arm Rest Installation and Adjustment Instructions............................................. 18
Boiance Shelf Support (Accessory Option)........................................................ 19
Bluetooth Speaker (Accessory Option) .............................................................. 20
Cleaning & Disinfection
Recommended Cleaners/Disinfectants .............................................................. 21
Cleaning Process .............................................................................................. 21
Inspections ................................................................................................................ 22
Warranty Information ................................................................................................. 22
Model Number & Serial Number
Product Label Location...................................................................................... 23
Specifications
Permissible Environmental Conditions............................................................... 24
Electrical Specifications..................................................................................... 24
Dimensions ....................................................................................................... 24
Contact Information ...................................................................................... back cover

1
PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS
This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an elec-
trical shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective
Earth (Ground) Terminal.
This symbol, when used in this manual or on product labels, indicates the date of
manufacture of the device.
This symbol, when used in this manual or on product labels, indicates alternating
current (AC).
This symbol, when used in this manual or on product labels, indicates direct current
(DC).
This symbol is used to indicate that the operator should consult the user manual.
This symbol indicates that when the end-user wishes to discard this product, it must
be sent to separate collection facilities for recovery and recycling.
UL 2601-1
CSA C22.2NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R
UL 2601-1
CSA C22.2NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R
~
----
PRODUCT USE DESCRIPTION
The product is a cord connected spa/massage table for commercial use. It is intended for indoor use.
Maximum weight capacity of 500 lbs.
The product is intended to be used by trained professionals in a controlled environment. A review of
the following Safety Instructions is important for the safety of the operator and client. Read all instruc-
tions and understand this entire user manual before using the product. There are no known contrain-
dications to the use of this equipment.
The table should not be used in any other manner than that described within this manual. Use of any
unnecessary force or unauthorized procedures could result in injury to practitioner, client or equip-
ment.
SYMBOL IDENTIFICATION
CAUTION
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in
increased emissions or decreased immunity of the table.

2
IMPORTANT SAFETY INSTRUCTIONS
The table is designed to be a stand-alone table. This table must not be modified or incorporated into any other
equipment.
As with any moving mechanism there are potential pinch points around and underneath the table. It is the
responsibility of the operator of this equipment to ensure that bystanders are not in the area below or around
this equipment during operation.
Proper operation of this equipment is very important for the safety of the operator, client, and any other indi-
viduals in the area of this equipment. Directions for use of this equipment are described in this manual. The
operator should read these sections carefully.
Weight Limit: (client and accessories) 500 lbs. (227 kg) Do not exceed.
Adjustable Breast Comfort (ABC) System Weight Limit - 100 lbs. (45 kg.) Do not sit on the ABC System. Do not
place foreign objects into the ABC System. Only use as intended. For safety of your client, use a cloth sheet
between the ABC System and your client.
Be certain that the table is completely lowered without any tilt being present prior to discharging an
ambulatory client. The client may lose balance and fall.
This table is not suitable for use in the presence of flammable anesthetic mixture with air or oxygen or nitrous
oxide.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not lift table by the table top. This can damage the table.
When lowering the table, make sure there is nothing underneath the table top that can impede motion (like
stools, cabinets, accessory parts, cleaners, etc).
Use this furnishing only for its intended use as described in these instructions. Do not use attachments not rec-
ommended by the manufacturer.
Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug this furnishing from the electrical outlet before cleaning.
2. Unplug from outlet before adding or removing parts.
3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Contact Oakworks Customer Service before use at
717.235.6807.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
DANGER
Risk of electric shock - Connect this furnishing to a properly grounded outlet only. See Grounding Instructions
in this manual.
Electrical Shock Hazard - The power supply/control module is located on the lift frame. No user serviceable
parts are inside. Refer servicing to qualified personnel. Unplug wall plug prior to contact with any cables con-
nected to the power supply.

Celesta
4-Section Electric Salon
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
STANDARD SPECIFICATIONS
Motion 1 Powered 25”-37” (63-94 cm.) Height Range
Motion 2 Powered 0-70º Backrest
Motion 3 Powered 0-30º Foot Rest
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 500 lbs. (227 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight 260 lbs. (118 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Wood Finishes
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Side Arm Rests
Bluetooth Speaker
3

PRODUCT DESCRIPTION
4
CAUTION
CONTROL OPERATIONS - ELECTRIC SALON TABLES
Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed
for storage. DO NOT use this area for holding anything. Damage can occur to the table.
The O®Celesta Electric Salon Tables offer height, backrest, footrest, and optional ABC positioning
with electronic ease. Operate the foot and hand control as shown below to raise or lower the height, back-
rest, footrest, or optional ABC functions of the table.
Backrest Down
Backrest Up
Height Down
Height Up
Footrest Down
Footrest Up
ABC SYSTEM UP ABC SYSTEM DOWN
Backrest Down
Backrest Up
Height Down
Height Up
Footrest Down
Footrest Up
ABC Down
ABC Up
FOOT CONTROL WITH ABC
STANDARD FOOT CONTROL
Use any of the top 8 buttons to orient the table in
a favorite position. To store the current position
in memory, press the MEM button twice (double
click). Two audible beeps will confirm. To recall
a stored position, press & hold the MEM button.
MEMORY FUNCTION USE
Backrest Up Backrest Down
Memory 1 Function Memory 2 Function
Footrest Up Footrest Down
Height Up
ABC Down
ABC Up
ABC
Option
Zero Gravity Position
Fully Down/Flat Position
Height Down
ABC
Option

Celesta
1-Section Flat Top
PRODUCT DESCRIPTION
STANDARD SPECIFICATIONS
Motion 1 Powered 25”-37” (63-94 cm.) Height Range
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 500 lbs. (227 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight 240 lbs. (109 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Wood Finishes
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Bluetooth Speaker
For electrical specs, see Specifications section.
5

PRODUCT DESCRIPTION
CONTROL OPERATIONS - FLAT TOP TABLES
The O®Celesta Flat Top Tables offer height and optional ABC positioning with electronic ease.
Operate the foot and hand control as shown below to raise or lower the height or optional ABC functions of
the table.
ABC SYSTEM UP ABC SYSTEM DOWN
Height Down
Height Up
ABC Down
ABC Up
FOOT CONTROL WITH ABC
STANDARD FOOT CONTROL
Use any of the top 8 buttons to orient the table in
a favorite position. To store the current position
in memory, press the MEM button twice (double
click). Two audible beeps will confirm. To recall
a stored position, press & hold the MEM button.
MEMORY FUNCTION USE
Height Up
ABC
Option
Height Down
ABC
Option
ABC Up ABC Down
Memory 1 Function Memory 2 Function
DOWN
UP
6

PRODUCT DESCRIPTION
STANDARD SPECIFICATIONS
Motion 1 Powered 25”-37” (63-94 cm.) Height Range
Motion 2 Powered 0-70º Backrest
Motion 3 Powered 0-30º Foot Rest
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 500 lbs. (227 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight 260 lbs. (118 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Wood Finishes
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Side Arm Rests
Bluetooth Speaker
Clodagh Gemini
4-Section Electric Salon
For electrical specs, see Specifications section.
7

DIRECTIONS FOR USE
CAUTION
CONTROL OPERATIONS - ELECTRIC SALON TABLES
Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed
for storage. DO NOT use this area for holding anything. Damage can occur to the table.
The O®Clodagh Gemini Electric Salon Tables offer height, backrest, footrest, and optional ABC
positioning with electronic ease. Operate the foot and hand control as shown below to raise or lower the
height, backrest, footrest, or optional ABC functions of the table.
Backrest Down
Backrest Up
Height Down
Height Up
Footrest Down
Footrest Up
ABC SYSTEM UP ABC SYSTEM DOWN
Backrest Down
Backrest Up
Height Down
Height Up
Footrest Down
Footrest Up
ABC Down
ABC Up
FOOT CONTROL WITH ABC
STANDARD FOOT CONTROL
Use any of the top 8 buttons to orient the table in
a favorite position. To store the current position
in memory, press the MEM button twice (double
click). Two audible beeps will confirm. To recall
a stored position, press & hold the MEM button.
MEMORY FUNCTION USE
Backrest Up Backrest Down
Memory 1 Function Memory 2 Function
Footrest Up Footrest Down
Height Up
ABC Down
ABC Up
Zero Gravity Position
Fully Down/Flat Position
Height Down
ABC
Option
ABC
Option
8

Clodagh Gemini
1-Section Flat Top
PRODUCT DESCRIPTION
STANDARD SPECIFICATIONS
Motion 1 Powered 25”-37” (63-94 cm.) Height Range
Foot Control All powered motions
Hand Control All powered motions
Table Voltage Options 100V/60Hz - 230V/50Hz
Table Capacity 500 lbs. (227 kg.) (client and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight 240 lbs. (109 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Wood Finishes
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Bluetooth Speaker
For electrical specs, see Specifications section.
9

PRODUCT DESCRIPTION
CONTROL OPERATIONS - FLAT TOP TABLES
The O®Clodagh Gemini Flat Top Tables offer height and optional ABC positioning with electronic
ease. Operate the foot and hand control as shown below to raise or lower the height or optional ABC func-
tions of the table.
ABC SYSTEM UP ABC SYSTEM DOWN
Height Down
Height Up
ABC Down
ABC Up
FOOT CONTROL WITH ABC
STANDARD FOOT CONTROL
Use any of the top 8 buttons to orient the table in
a favorite position. To store the current position
in memory, press the MEM button twice (double
click). Two audible beeps will confirm. To recall
a stored position, press & hold the MEM button.
MEMORY FUNCTION USE
Height Up
ABC
Option
Height Down
ABC
Option
ABC Up ABC Down
Memory 1 Function Memory 2 Function
DOWN
UP
10

The tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is
rated for the table. (See Grounding below)
Arrange the power cord and control cords so that they will not create a tripping hazard.
Be sure access to the plug is not blocked for disconnecting the table from power.
INSTALLATION
GROUNDING
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electrical current to reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding pin. The pin must be plugged into an appropri-
ate outlet that is properly installed and grounded in accordance with all local codes and ordinances. See
U.S. Sample below.
Correct Implementation Incorrect Implementation
Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.
DANGER

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check
with a qualified electrician or service person if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product - if it will not fit the outlet; have a proper outlet
installed by a qualified electrician.
Grounding Methods
11
A table keyswitch is located insidethecabinetat the head end of the table next to the power strip. This
key switch will lock-out the table and prevent all motions. It should be used to prevent unauthorized
use. Remove the key if children have the opportunity to access the table without adult supervision.
TABLE KEYSWITCH

The cabinet hood area under the backrest top is not
designed for storage or as an area to hold acces-
sories. DO NOT use this area for holding anything.
Damage can occur to the table, especially when
the pre-set position commands that are accessed
by the hand control are activated. Placing anything
on this area is prohibiting movement of the backrest
and can cause damage to the table or the object.
Using this area as storage will void the warranty.

TO ACCESS THE STORAGE IN THE UNDER TABLE CABINET:
The large under-table cabinet provides storage for stacks of towels and other equipment. A power
strip is located inside the cabinet at the head end of the table accommodates hot towel cabinets
and other accessories. This allows you to store the unit inside with no excess cords to get in the way.
INSTALLATION
UNDER TABLE CABINET & IN-CABINET POWER STRIP
IMPORTANT SAFETY NOTE
12
CLODAGH GEMINI MODEL
Doors swing open for cabinet access
This product is equipped with an interior 120-volt 60Hz power strip. The total electrical load of equip-
󰀨
for other counties.
DANGER
CELESTA MODEL
Doors slide to the side for cabinet access

DIRECTIONS FOR USE
13
1/2” Open-end
Wrench
Leveler Foot
LEVELING INSTRUCTIONS
1. Place the table in the location where you plan to use it.
2. Rock the table to determine if it is level with the floor. If
the table rocks back and forth at all, the foot that clears
the floor when you rock the table will need adjustment.
3. Adjust the Leveler Foot by first loosening the locking
nut found just above the rubber Leveler Foot with the
1/2” open-end wrench.
4. Lower the adjustable rubber Leveler Foot until it meets
the floor snugly. Tighten the locking nut against the leg
of the table with the 1/2” open-end wrench to fix the
Leveler Foot in position.
5. Rock the table again to be sure adjustments have
stabilized the table. If necessary make any additional
adjustments in the same way.
Never lift the table by grasping the table top as the table top is not designed to hold the
weight of the base and you could damage the table and the electronics that run the table top.
If you need to move the table, place one person at each corner of the table. We recommend that you
have the table top in the up position (with Arm Rests removed) to have the table top ends out of the
way as much a possible. Have each person firmly grasp the cabinet base at the bottom by the table
legs and lift the table from the base. As when moving any piece of heavy equipment, bend at the knee
and lift with your legs beneath you and not with your back. Be aware and use proper, safe procedures
for moving a table of this size to prevent injury to yourself or the table. We strongly recommend that
a flatbed dolly be used that can hold the entire table if moving the table involves any large distance.
Grasp
at base
corner
Position at lowest height
CAUTION
MOVING THE TABLE
Before moving the table, disconnect the power cord from the power outlet. Secure the power cord and
all hand or foot controls before moving. The table weighs as much as 260 lbs. (118 kg.) Four people
are required to move the table safely.

DIRECTIONS FOR USE
REMOVING TOP PAD
The top pad has been designed to be easily removable and replaceable with no tools needed.
Thumb Screw Locations (4 per side)
1. Unscrew the thumb screw clockwise until the thumb screw is completely
removed. Repeat for all 8 thumb screws. If the thumbs screws are on too
tight, a 3/16” bit can be used.
2. Lift top pad off the platform.
IF THE TABLE HAS A HEATED TOP:
Unplug the table from the wall outlet and disconnect the wires circled from the control box located under the
platform. Pull the cables through the platform before completely removing the top pad.
TO REMOVE THE TOP PAD:
The top pad is attached to the platform with 8 thumb screws located below the platform as shown.
Heated Top Cables
14

ADJUSTABLE BREAST COMFORT (ABC) SYSTEM (OPTION)
CAUTION
• ABC System Weight Limit - 100 lbs. (45 kg.) Do not sit on the ABC System.
• Do not place foreign objects into the ABC System. Only use as intended.
• For safety of your client, use a cloth sheet between the ABC System and your client.
In Prone positions, for male or female clients when the face rest is in use, lower
the cushion approximately 3/4” at a time (This is approximately 1 second of
lowering) and check in with the client regarding their comfort after making the
change. Incrementally lower the cushion until the client reports they are com-
fortable. Sometimes going back up a little will be preferred. This whole process
takes no more than 15-20 seconds. After lowering, check headrest position to
ensure comfort & support. NOTE: Breast size is not the only determinate of cush-
ion location. Every person’s comfort spot is different, regardless of breast size.
The O®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts and pectoral
muscles, allowing the client to relax and create a more comfortable position for their spine. The height of the cushion is
easily adjusted up and down in small increments by using the hand control. We recommend that the cushion height be
adjusted in the following ways:
*Always start with the cushion top level with the top of the table for Prone or Supine Positioning*
PRONE POSITIONING
SUPINE POSITIONING
HEAD REST USE IN SUPINE
15
DIRECTIONS FOR USE
When turning clients over in the supine
position, you may use the cushion to level
during or after their change of position. IT is
not important that the cushion be completely
level. As in prone positions, make small
changes in height and check in with the client.
If you are using the head rest in the
Supine position, you may use the cush-
ion at relatively high heights to facilitate
stretching for short periods of time. It is
not recommended that clients experience
this position for more than a few minutes.

INTEGRATED HEATED TOP (OPTION)
16
DIRECTIONS FOR USE
Integrated heat level indicator
USING THE INTEGRATED HEATED TOP:
The table comes with the option for a fully integrated dual zone heated top pad. Simply press the heating
indicator(s) located on the right side rail of the table to the desired heat level. The heat can reach up to
40°C (105°F).
Low Medium High
ZONE 1 ZONE 2
Zone 1 controls the upper half of the pad, while Zone 2 controls the lower half of the pad. Press both but-
tons located on the right side of the table in the seat section to turn on both zones and heat the entire top.
BLINKING LIGHTS
If one or both controllers’ heat level indicator lights are blinking, the heating elements are not con-
nected properly and/or damaged. Unplug the table and locate the control box(es) on the underside of
the table top. Disconnect the heating element connectors from the control box and reconnect. Plug
the power cord back into the wall outlet. Call Customer Service at 717.235.6807 if problem continues.

DIRECTIONS FOR USE
Double articulating action provides nearly limitless positioning options with
the QuickLock Face Rest. The adjustable pad takes pressure off sensitive
facial areas while providing superb support. The QuickLock Face Rest
can be used in both prone and supine positioning and folds out of the way
when not in use. Adjustments are made easily by loosening the cam locks,
adjusting for height and angle and then locking locks into that position.
The table has a bracket at the head of the table for a variety of uses.
3”
• QuickLock Face Rest Weight Limit - 25 lbs (11.3 kg)
• Do not put excessive weight or pressure on the Face Rest.
• Excessive pressure can cause premature failure of the Face Rest.
CAUTION
ATTACHING QUICKLOCK FACE REST:
When attaching the QuickLock Face Rest, slide the frame dowels into the bracket until bullet catches are
snapped into place.
To remove the QuickLock Face Rest, gently pull the headrest by the dowels until it comes free. Set it
safely aside or store it inside the under-table cabinet until needed.
QuickLock FACE REST: (ACCESSORY OPTION)
To use the face rest with your clients supine,
rotate the face rest pad so that the thick part of
the pad supports your client’s cervical region.
Adjusting the height and angle of the face rest
gives your clients perfectly comfortable support.
The face pad is flexible so that you can bring
the open ends together or spread them apart
to achieve the most comfortable support for
any size face. To avoid your client’s chin
from hitting the spacebar, make sure the pad
is narrow enough to support their whole face.
For appropriate cervical flexion, use the cam locks
to adjust the downward angle of the face rest,
making sure that the surface of the face rest pad at
the chin is not lower than the surface of the table.
TIPS FOR GREAT POSITIONING USING THE QUICKLOCK FACE REST:
Pull by dowels
Pull by dowels
To remove
17