OAKWORKS PX Series User manual

OAKWORKS
PX Series
USER MANUAL
www.oakworks.com · 717.235.6807

© Copyright 2021
OAKWORKS®, Inc.
Printed in U.S.A.
All rights are reserved. No part
of this document may be
photocopied, reproduced or
translated to another language
without prior written consent
of OAKWORKS®, Inc.
OAKWORKS®is a registered
trademark of OAKWORKS®, Inc.
Notice
The information contained within
this document is subject to change
without notice and should not
be construed as a commitment by
OAKWORKS®, Inc.
OAKWORKS®, Inc. encourages
requests for technical specifica-
tions and the like documentation to
ensure accuracy. The appropriate
documentation is available upon
request.
OAKWORKS®, Inc. shall not be
liable for incidental or consequen-
tial damages in connection with or
arising out of the furnishing, per-
formance, or use of this document
and the program material which it
describes.

TABLE OF CONTENTS
Product Use Description ............................................................................................. 1
Important Safety Instructions
Symbol Identification ........................................................................................... 1
Safety Instructions ........................................................................................... 2-3
Installation
Grounding ........................................................................................................... 4
Product Description & Photo
PX300 ................................................................................................................. 5
Control Operation - PX300 .................................................................................. 6
PX150 ................................................................................................................. 7
Control Operation - PX150 .................................................................................. 8
PX100 ................................................................................................................. 9
Control Operation - PX100 ................................................................................ 10
Directions for Use
Adjusting the Back Rest section ........................................................................ 11
Moving the table................................................................................................ 12
Dual Locking Casters Use ................................................................................. 12
Integrated Heated Top (Option)......................................................................... 13
QuickLock Face Rest (Accessory Option).......................................................... 14
Adjustable Side Arm Rests (Accessory Option - PX300 Only) ........................... 15
Cleaning & Disinfection
Recommended Cleaners/Disinfectants .............................................................. 16
Cleaning Process .............................................................................................. 16
Inspections & Maintenance ....................................................................................... 17
Warranty Information ................................................................................................ 17
Model Number & Serial Number
PX Series.......................................................................................................... 18
Specifications
Table Dimensions ............................................................................................ 19
Product Specifications....................................................................................... 20
Environmental Conditions.................................................................................. 20
Electrical Specifications..................................................................................... 20
Guidance and manufacturer’s declaration -
Electromagnetic emissions ................................................................................ 21
Recommended separation distances ................................................................. 21
Guidance and manufacturer’s declaration -
Electromagnetic immunity............................................................................. 22-23
Contact Information ...................................................................................... back cover

PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS
PRODUCT USE DESCRIPTION
The Oakworks PX Tables are used to support the patient during examinations and procedures. They
are intended to be operated by a healthcare professional in a medical environment. No special train-
ing is required but a review of the following Safety Instructions is important for the safety of the oper-
ator and patient. The healthcare professional should read and understand this entire manual before
use with a patient. There are no known contraindications to the use of this equipment.
SYMBOL IDENTIFICATION
This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an electri-
cal shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective Earth
(Ground) Terminal.
This symbol, when used in this manual or on product labels, indicates that the
product should be protected from moisture. The humidity specifications for Transport &
Storage are listed in the environmental conditions section of this manual.
This symbol is used to indicate that the operator should consult the user manual.
This symbol, when used in this manual and on product labels, indicates that the table and
components are a Type B Applied Part pursuant to IEC 60601-1.
This symbol, when used in this manual or on product labels, indicates alternating cur-
rent (AC).
This symbol, when used in this manual or on product labels, indicates direct current
(DC).
~
----
1

IMPORTANT SAFETY INSTRUCTIONS
DANGER
To reduce risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning.
2. Connect this furnishing to a properly grounded outlet only. See Grounding Instructions in this manual.
Electrical Shock Hazard - The power supply/control module is located on the lift frame. No user serviceable parts
are inside. Refer servicing to qualified personnel. Unplug wall plug prior to contact with any cables connected to
the power supply.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug from outlet before adding or removing parts.
2. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Contact Oakworks Customer Service before use at 717.235.6807.
3. Keep the cord away from heated surfaces.
4. Never drop or insert any object into any opening.
5. Do not use outdoors.
6. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not rec-
ommended by the manufacturer.
7. To disconnect, turn all controls to the off position, then remove plug from outlet.
8. Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a
qualified electrician if you are in doubt as to whether the product is properly grounded.
9. Do not modify the plug provided with the product - If it will not fit the outlet, have a proper outlet installed by a
qualified electrician
WARNING
• Risk of Injury - 550 lbs. (250 kg.) maximum load.
• Risk of Injury - Do not operate this equipment unless properly trained.
• Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled per-
sons.
• This unit is For Commercial Use Only and to be operated only by trained personnel..
• Lifting & Top motion electric motors are rated at 10% duty cycle max. (2 minutes on, 18 minutes off)
PINCH HAZARD
• Keep hands, feet and controls away from the table while making adjustments.
• Risk of Injury - Not to be used in locations where children or people with cognitive disabilities are antici-
pated to be present.
• Risk of Injury - Children should NEVER be near the table when in use.
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
2

ENTRAPMENT
• Risk of Injury - The picture below indicate areas of entrapment that can occur when operating this equip-
ment. It is the responsibility of the operator to ensure that bystanders are not in or around these areas dur-
ing operation.
CAUTION
• The use of accessories, transducers, and cables other than those specified by the manufacturer, may
result in increased emissions or decreased immunity of the table.
• The table should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is
necessary, the table should be observed to verify normal operation in the configuration in which it will be
used.
• The table is designed to be a stand-alone table. This table must not be modified or incorporated into any
other equipment.
• Proper operation of this equipment is very important for the safety of the operator, client, and any other
individuals in the area of this equipment. Directions for use of this equipment are described in this manual.
The operator should read these sections carefully.
• Weight Limit: (patient and accessories) 550 lbs. (250 kg.) Do not exceed.
• Be certain that the table is completely lowered without any tilt being present prior to discharging an ambu-
latory patient. The patient may lose balance and fall.
• When lowering the table, make sure there is nothing underneath the tabletop that can impede motion (like
stools, cabinets, accessory parts, cleaners, etc.) When using the table Height Up function, do not place
anything between the metal frame and the base structure. Damage can occur to the table.
• Do not sit on backrest or footrest sections.
• Before moving any of the tables, disconnect the power cord from the power outlet.
• The table weighs as much as 200 lbs. (91 kg.)
• Do not lift table by the tabletop pad. This can damage the removable pad. Use extreme caution when lift-
ing the table to move it. 2 people are required to move the table safely.
• Do not use the table to transport a patient.
3

The Tables come completely assembled and ready to use. Plug the cord into a functioning outlet that
is rated for the table. (See Grounding below)
Arrange the power cord and control cords so that they will not create a tripping hazard and where the
controls are located to your liking and are conveniently accessible.
Be sure access to plug is not blocked for disconnecting the table from power.
INSTALLATION
GROUNDING
Grounding for 120 Volt products:
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug
shown below. See Grounding Methods - US 120V Example. Make sure that the product is connected
to an outlet having the same configuration as the plug. No adapter should be used with this product.
Grounding for 230 Volt products:
This product is rated for less than 15 amperes and is for use on a circuit having a nominal rating
of 230 volts and is factory-equipped with specific electric plug to permit connection to a proper
circuit. Make sure that the product is connected to an outlet having the same configuration as the
plug. No adapter should be used.
Correct Implementation Incorrect Implementation
Risk of Electric Shock - Connect this furnishing to a properly grounded outlet
only.
DANGER

Grounding Methods - US 120V Example
4

PRODUCT DESCRIPTION
PX300
STANDARD SPECIFICATIONS
Motion 1 w/ 4” Foam Powered 22”-40” (57-102 cm.) Height Range
Motion 2 Powered 0-70º Backrest
Motion 3 Powered 0-30º Foot Rest
Foot Control All powered motions
Table Voltage Options 120V/60Hz - 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (Patient and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 3” (8 cm.) or 4” (10 cm.) Comfort Foam
Table Weight 200 lbs. (91 kg.)
OPTIONS
Dual Locking Casters
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Table Extender - 12” (30.5 cm.) Long
Side Arm Rests
5
For electrical specs, see Specifications section.

CAUTION Do not sit on the backrest or leg rest sections. Be sure the self-locking molded rubber feet are flat side
down to ensure safety and stability. The hood area under the backrest top is not designed for stor-
age. DO NOT use this area for holding anything. Damage can occur to the table.
The PX300 tables offer height, backrest and footrest positioning with electronic ease. Operate the foot
control and/or optional hand control as shown below to raise or lower the height, backrest or footrest
functions of the table.
PRODUCT DESCRIPTION
CONTROL OPERATIONS - PX300
Backrest Down
Backrest Up
Height Down
Height Up
Footrest Down
Footrest Up
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
Backrest
DOWN
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
Backrest
UP
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
Height
UP
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
Height
DOWN
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
Footrest
UP
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
Footrest
DOWN
P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
OPTIONAL HAND CONTROL
6

PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
PX150
STANDARD SPECIFICATIONS
Motion 1 w/ 4” Foam Powered 22”-40” (57-102 cm.) Height Range
Motion 2 Manual 0-80º Backrest
Foot Control Height Range
Table Voltage Options 120V/60Hz - 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (Patient and accessories)
Widths 29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length 73” (185 cm.)
Padding 3” (8 cm.) or 4” (10 cm.) Comfort Foam
Table Weight 180 lbs. (82 kg.)
OPTIONS
Dual Locking Casters
Integrated Heated Top
ACCESSORIES
QuickLock Face Rest
Table Extender - 12” (30.5 cm.) Long
7