OAKWORKS Prema e-nvi User manual

USER MANUAL
OAKWORKS®
Prema e-nvi

P a g e 2 | 28
© Copyright 2023
OAKWORKS®, Inc.
Printed in U.S.A.
All rights are reserved. No part
of this document may be
photocopied, reproduced, or
translated to another language
without prior written consent of
OAKWORKS®, Inc.
OAKWORKS®is a registered
trademark of OAKWORKS®,
Inc.
Notice
The information contained within this
document is subject to change
without notice and should not be
construed as a commitment by
OAKWORKS®, Inc.
OAKWORKS®, Inc. encourages
requests for technical specifications
and the like documentation to ensure
accuracy. The appropriate
documentation is available upon
request.
OAKWORKS®, Inc. shall not be
liable for incidental or consequential
damages in connection with or
arising out of the furnishing,
performance, or use of this
document and the program material
which it describes.

P a g e 3 | 28
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ...............................................................................................................................5
PRODUCT USE DESCRIPTION ........................................................................................................................................5
SYMBOL IDENTIFICATION................................................................................................................................................5
IMPORTANT SAFETY INSTRUCTIONS............................................................................................................................6
PRODUCT DESCRIPTION.....................................................................................................................................................8
Electric Salon ......................................................................................................................................................................8
CONTROL OPERATIONS- ELECTRIC SALON TABLES..................................................................................................9
Electric Backrest ...............................................................................................................................................................10
CONTROL OPERATIONS- ELECTRIC BACKREST TABLES ........................................................................................11
Flat Top.............................................................................................................................................................................12
CONTROL OPERATIONS- FLAT TOP TABLES..............................................................................................................13
INSTALLATION....................................................................................................................................................................14
GROUNDING....................................................................................................................................................................14
UNDER-TABLE CABINET & IN-CABINET POWER RECEPTACLE ...............................................................................15
OPTIONAL EXTERNAL POWER/ USB RECEPTACLE...................................................................................................15
DIRECTIONS FOR USE.......................................................................................................................................................16
LEVELLING INSTRUCTIONS...........................................................................................................................................16
MOVING THE TABLE.......................................................................................................................................................16
REMOVING THE TOP PAD..............................................................................................................................................17
INTEGRATED HEATED TOP (OPTION)..........................................................................................................................18
ADJUSTABLE BREAST COMFORT (ABC) SYSTEM (OPTION) ....................................................................................19
HEAD REST (ACCESSORY OPTION).............................................................................................................................20
ADJUSTABLE SIDE ARM RESTS (ACCESSORY OPTION) ..........................................................................................21
BOIANCE SHELF SUPPORT: (ACCESSORY OPTION).................................................................................................22
CLEANING & DISINFECTION .............................................................................................................................................23
RECOMMENDED CLEANERS/DISINFECTANTS...........................................................................................................23
CLEANING PROCESS .....................................................................................................................................................23
INSPECTIONS......................................................................................................................................................................24
WARRANTY .........................................................................................................................................................................24
MODEL NUMBER & SERIAL NUMBER..............................................................................................................................25
PRODUCT LABEL LOCATION.........................................................................................................................................25
TABLE DIMENSIONS ..........................................................................................................................................................26
SPECIFICATIONS................................................................................................................................................................27
PERMISSIBLE ENVIRONMENT CONDITIONS...............................................................................................................27
ELECTRICAL SPECIFICATIONS.....................................................................................................................................27
CONTACT INFORMATION:.................................................................................................................................................28

P a g e 4 | 28
This page is intentionally left blank.

P a g e 5 | 28
IMPORTANT SAFETY INSTRUCTIONS
The product is a cord connected spa/massage table for commercial use. It is intended for indoor use. Maximum weight
capacity of 500 lbs.
The product is intended to be used by trained professionals in a controlled environment. A review of the following Safety
Instructions is important for the safety of the operator and client. Read all instructions and understand this entire user
manual before using the product. There are no known contraindications to the use of this equipment.
The table should not be used in any other manner than that described within this manual. Use of any unnecessary force
or unauthorized procedures could result in injury to practitioner, client or equipment.
This symbol, when used in this manual and on product labels, represents a caution warning. Be
sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an electrical shock
hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective Earth
(Ground) Terminal.
This symbol, when used in this manual and on product labels, indicates the name and address of
the manufacturer.
This symbol, when used in this manual or on product labels, indicates the country of manufacture
along with date of manufacture of the device next to it.
This symbol, when used in this manual or on product labels, indicates alternating current (AC).
This symbol, when used in this manual or on product labels, indicates direct current (DC).
This symbol is used to indicate that the operator should consult the user manual.
This symbol indicates that when the end-user wishes to discard this product, it must be sent to
separate collection facilities for recovery and recycling.
PRODUCT USE DESCRIPTION
SYMBOL IDENTIFICATION

P a g e 6 | 28
IMPORTANT SAFETY INSTRUCTIONS
To reduce risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning.
2. Connect this furnishing to a properly grounded outlet only. See Grounding Instructions in this manual.
Electrical Shock Hazard - The power supply/control module is located on the lift frame. No user serviceable parts are inside.
Refer servicing to qualified personnel. Unplug wall plug prior to contact with any cables connected to the power supply.
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug from outlet before adding or removing parts.
2. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Contact Oakworks Customer Service before use at 717.235.6807.
3. Keep the cord away from heated surfaces.
4. Never drop or insert any object into any opening.
5. Do not use outdoors.
6. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not rec-
ommended by the manufacturer.
7. To disconnect, turn all controls to the off position, then remove plug from outlet.
8. Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified
electrician if you are in doubt as to whether the product is properly grounded.
9. Do not modify the plug provided with the product - If it will not fit the outlet, have a proper outlet installed by a qualified
electrician
•Risk of Injury - 500 lbs. (227 kg.) maximum load.
•Risk of Injury - Do not operate this equipment unless properly trained.
•Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
•This unit is For Commercial Use Only and to be operated only by trained personnel.
•Lifting & Top motion electric motors are rated at 10% duty cycle max. (2 minutes on, 18 minutes off)
•Keep hands, feet and controls away from the table while making adjustments.
•Risk of Injury - Not to be used in locations where children or people with cognitive disabilities are anticipated
to be present.
•Risk of Injury - Children should NEVER be near the table when in use.

P a g e 7 | 28
IMPORTANT SAFETY INSTRUCTIONS
Risk of Injury - The picture below indicates areas of entrapment that can occur when operating this equipment. It is the
responsibility of the operator to ensure that bystanders are not in or around these areas during operation.
•The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in
increased emissions or decreased immunity of the table.
•The table should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is
necessary, the table should be observed to verify normal operation in the configuration in which it will be
used.
•The table is designed to be a stand-alone table. This table must not be modified or incorporated into any other
equipment.
•Proper operation of this equipment is very important for the safety of the operator, client, and any other
individuals in the area of this equipment. Directions for use of this equipment are described in this manual.
The operator should read these sections carefully.
•Weight Limit: (client and accessories) 500 lbs. (227 kg.) Do not exceed.
•Adjustable Breast Comfort (ABC) System Weight Limit: 100 lbs. (45 kg.)
•Do not sit on the ABC System. Only use the ABC System as intended. Do not place foreign objects into the
ABC System. For safety of your client, use a cloth sheet between the ABC System and your client.
•Be certain that the table is completely lowered without any tilt being present prior to discharging an ambu-
latory client. The client may lose balance and fall.
•When lowering the table, make sure there is nothing underneath the tabletop that can impede motion (like
stools, cabinets, accessory parts, cleaners, etc.) When using the table Height Up function, do not place
anything between the metal frame and the base structure. Damage can occur to the table.
•Do not sit on backrest or footrest sections.
•Before moving any of the tables, disconnect the power cord from the power outlet.
•The table weighs as much as 260 lbs. (118 kg.)
•Do not lift table by the tabletop pad. This can damage the removable pad. Use extreme caution when lifting
the table to move it. 4 people are required to move the table safely.
•Do not use the table to transport a client.

P a g e 8 | 28
PRODUCT DESCRIPTION
Prema e-nvi
Electric Salon
STANDARD SPECIFICATIONS
Motion 1
Powered 22.5”-32.5” (57.2-82.0 cm.) Height Range
Motion 2
Powered 0-70º Backrest
Motion 3
Powered 0-30º Foot Rest
Foot Control
All powered motions
Hand Control
All powered motions
Voltage Options
100V/60Hz 120V/60Hz 230V/50Hz
Table Capacity
500 lbs. (227 kg.) (client and accessories)
Widths
29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length
73” (185 cm.)
Padding
4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight
160-240 lbs. (72-107 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Choice of 4 Cabinet configurations
Wood Finishes
Laminate Finishes
Integrated Heated Top
Sovi Sound System
External Outlet
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Side Arm Rests

P a g e 9 | 28
PRODUCT DESCRIPTION
The Prema e-nvi Electric Salon Table offers height, backrest, footrest, and optional ABC positioning with electronic ease.
Operate the foot and hand control as shown below to raise or lower the height, backrest, footrest, or optional ABC
functions of the table.
CONTROL OPERATIONS- ELECTRIC SALON TABLES

P a g e 10 | 28
PRODUCT DESCRIPTION
Prema e-nvi
Electric Backrest
STANDARD SPECIFICATIONS
Motion 1
Powered 22.5”-32.5” (57.2-82.0 cm.) Height Range
Motion 2
Powered 0-70º Backrest
Foot Control
All powered motions
Hand Control
All powered motions
Voltage Options
100V/60Hz 120V/60Hz 230V/50Hz
Table Capacity
500 lbs. (227 kg.) (client and accessories)
Widths
29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length
73” (185 cm.)
Padding
4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight
160-240 lbs. (72-107 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Choice of 4 Cabinet configurations
Wood Finishes
Laminate Finishes
Integrated Heated Top
Sovi Sound System
External Outlet
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Side Arm Rests

P a g e 11 | 28
PRODUCT DESCRIPTION
The Prema e-nvi Electric Backrest Table offers height, backrest, and optional ABC positioning with electronic ease.
Operate the foot and hand control as shown below to raise or lower the height, backrest, or optional ABC functions of the
table.
CONTROL OPERATIONS- ELECTRIC BACKREST TABLES

P a g e 12 | 28
PRODUCT DESCRIPTION
Prema e-nvi
Flat Top
STANDARD SPECIFICATIONS
Motion 1
Powered 22.5”-32.5” (57.2-82.0 cm.) Height Range
Foot Control
All powered motions
Hand Control
All powered motions
Voltage Options
100V/60Hz 120V/60Hz 230V/50Hz
Table Capacity
500 lbs. (227 kg.) (client and accessories)
Widths
29” (74 cm.), 31” (79 cm.), or 33” (84 cm.)
Length
73” (185 cm.)
Padding
4” (10 cm.) or 6” (15 cm.) Aerocel Foam™
Table Weight
160-240 lbs. (72-107 kg.)
OPTIONS
Adjustable Breast Comfort (ABC) System
Choice of 4 Cabinet configurations
Wood Finishes
Laminate Finishes
Integrated Heated Top
Sovi Sound System
External Outlet
ACCESSORIES
QuickLock Face Rest
Boiance Shelf Support
Side Arm Rests

P a g e 13 | 28
PRODUCT DESCRIPTION
The Prema e-nvi Flat Top Table offers height and optional ABC positioning with electronic ease. Operate the foot and
hand control as shown below to raise or lower the height or optional ABC functions of the table.
CONTROL OPERATIONS- FLAT TOP TABLES

P a g e 14 | 28
INSTALLATION
The tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is rated for the table.
(See Grounding below)
Arrange the power cord and control cords so that they will not create a tripping hazard.
Be sure access to the plug is not blocked for disconnecting the table from power.
Risk of Electric Shock- Connect this furnishing to a properly grounded outlet only.
This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for
electrical current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding pin. The pin must be plugged into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances. See U.S. sample below.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified
electrician or service person if you are in doubt as to whether the product is properly grounded. Do not modify the plug
provided with the product –if it will not fit the outlet; have a proper outlet installed by a qualified electrician.
GROUNDING

P a g e 15 | 28
INSTALLATION
TO ACCESS THE STORAGE IN THE UNDER TABLE CABINET:
The large under-table cabinet provides storage for stacks of towels and other equipment. For Open Shelf & Sliding Door
models, a power strip is located inside the cabinet at the foot end of the table. For Storage Drawer & Warming Drawer
models, a power receptacle is located in the wall of the open shelf area at the head end. The in-cabinet power receptacle
accommodates hot towel cabinets and other accessories. This allows you to store the unit inside with no excess cords to
get in the way.
The total electrical load of equipment plugged into any outlets is not to exceed 7 amps or 840 watts. Voltage
will be different for other counties.
UNDER-TABLE CABINET & IN-CABINET POWER RECEPTACLE
OPTIONAL EXTERNAL POWER/ USB RECEPTACLE
Power strip at foot end inside cabinet
(Open Shelf & Sliding Door models)
Power receptacle at head end inside
open shelf (Storage Drawer &
Warming Drawer models)
External power /USB receptacle at
foot end of cabinet (Option on all
models)
Note: USB for charging only

P a g e 16 | 28
DIRECTIONS FOR USE
1. Place the table in the location where you plan to use
it.
2. Rock the table to determine if it is level with the floor.
If the table rocks back and forth at all, the foot that
clears the floor when you rock the table will need
adjustment.
3. Adjust the Leveler Foot by first loosening the locking
nut found just above the rubber Leveler Foot with
the 1/2” open-end wrench.
4. Lower the adjustable rubber Leveler Foot until it
meets the floor snugly. Tighten the locking nut
against the leg of the table with the 1/2” open-end
wrench to fix the Leveler Foot in position.
5. Rock the table again to be sure adjustments have
stabilized the table. If necessary make any
additional adjustments in the same way.
Never lift the table by grasping the table top as the table top is not designed to hold the weight of the base and you could
damage the table and the electronics that run the table top.
If you need to move the table, place one person at each corner of the table. We recommend that you have the table top in
the up position (with Arm Rests removed) to have the table top ends out of the way as much a possible. Have each
person firmly grasp the cabinet base at the bottom by the table legs and lift the table from the base. As when moving any
piece of heavy equipment, bend at the knee and lift with your legs beneath you and not with your back. Be aware and use
proper, safe procedures for moving a table of this size to prevent injury to yourself or the table. We strongly recommend
that a flatbed dolly be used that can hold the entire table if moving the table involves any large distance.
LEVELLING INSTRUCTIONS
MOVING THE TABLE

P a g e 17 | 28
DIRECTIONS FOR USE
The top pad has been designed to be easily removable and replaceable with no tools needed.
IF THE TABLE HAS A SOVI SOUND SYSTEM TOP:
Unplug the table from the wall outlet and disconnect the wires circled from the box located under the platform. Pull the
cables through the platform before completely removing the top pad.
IF THE TABLE HAS A HEATED TOP:
Unplug the table from the wall outlet and disconnect the wires circled from the control box located under the platform. Pull
the cables through the platform before completely removing the top pad.
TO REMOVE THE TOP PAD:
The Top Pad is attached to the platform with 8 thumb screws located below the platform as shown.
REMOVING THE TOP PAD
Sovi Cables

P a g e 18 | 28
DIRECTIONS FOR USE
USING THE INTEGRATED HEATED TOP: The table comes with the option for a fully integrated heated top pad.
Simply press the heating indicator located on the right side of the table to the desired heat level. The heat can reach up to
43°C (110°F). The system comes equipped with an 8 hour automatic shutoff.
BLINKING LIGHTS
If the controller’s heat level indicator lights are blinking, the heating elements are not connected properly and/or damaged.
Unplug the table and locate the control box on the underside of the table top. Disconnect the heating element connectors
from the control box and reconnect. Plug the power cord back into the wall outlet. Call Customer Service at 717.235.6807
if problem continues.
REMOVING THE TOP PAD
INTEGRATED HEATED TOP (OPTION)

P a g e 19 | 28
DIRECTIONS FOR USE
ADJUSTABLE BREAST COMFORT (ABC) SYSTEM (OPTION)

P a g e 20 | 28
DIRECTIONS FOR USE
Double articulating action provides nearly limitless positioning options
with the QuickLock Face Rest. The adjustable pad takes pressure off
sensitive facial areas while providing superb support. The QuickLock
Face Rest can be used in both prone and supine positioning and folds
out of the way when not in use. Adjustments are made easily by
loosening the cam locks, adjusting for height and angle and then locking
locks into that position. The table has a bracket at the head of the table
for a variety of uses.
ATTACHING QUICKLOCK FACE REST:
When attaching the QuickLock Face Rest, slide the frame dowels into the bracket until bullet catches are snapped into
place.
To remove the QuickLock Face Rest, gently pull the headrest by the dowels until it comes free. Set it safely aside or store
it inside the under-table cabinet until needed.
TIPS FOR GREAT POSITIONING USING THE QUICKLOCK FACE REST:
To use the face rest with your clients supine, rotate the
face rest pad so that the thick part of the pad supports
your client’s cervical region. Adjusting the height and
angle of the face rest gives your clients perfectly
comfortable support.
The face pad is flexible so that you can bring the open
ends together or spread them apart to achieve the most
comfortable support for any size face. To avoid your
client’s chin from hitting the spacebar, make sure the
pad is narrow enough to support their whole face.
For appropriate cervical flexion, use the cam locks to
adjust the downward angle of the face rest, making sure
that the surface of the face rest pad at the chin is not
lower than the surface of the table.
HEAD REST (ACCESSORY OPTION)