Ocean Digital WR-230S User manual

WR-230S
Internet Radio
User Manual
Please read this user manual carefully before using the receiver

Location of Controls ...........................................................1
Remote control ..................................................................2
How to input security code for your wireless network .............3
1. To start up .....................................................................5
2. Network Setup ...............................................................6
3. Overview of features and functions ..................................7
4. Internet Radio ................................................................8
5. Media Centre ...............................................................10
6. DAB+/DAB Radio .........................................................11
7. FM Radio .....................................................................12
8. Bluetooth playback .......................................................13
9. Aux-In .........................................................................13
10. Alarm Setting .............................................................14
11. Sleep Timer Setting ....................................................15
12. Configuration .............................................................16
13. Remote control via PC / Smart phone
- Tuning internet radio & manage favourite....................22
14. Trouble Shooting ........................................................25
Helpful Tips .....................................................................26
Technical Specification ....................................................27
In the box ........................................................................28
Contents

1
1. Power
Standby on/off
2. Left
Back to previous menu/left cursor
3. Right
Right cursor/Enter edit menu under Favourite list /View the big clock & radio info
under playing screen
4. Local
Access the internet station locally
5. Favourite
Press and hold to preset particular station to favourite list
Press to recall the favourite list
6. Menu
Access main menu/press this button to return to the playing screen
7. Tune/Select/ Volume
Dial / Select: Rotate to scroll up / down on the main menu / Push to confirm /
select menu options / Push to stop / resume playback of radio channel
Volume control: Rotate the knob to adjust volume level in playing screen
8. TFT 2.4” color screen
9. Infrared sensor for remote
10. Speaker
11. Power on/off switch
12. Earphone jack 3.5 mm
13. Audio out jack 3.5 mm
14. Aux in jack 3.5 mm
15. Ethernet (LAN) connector
16. DC IN Jack
17. Telescopic antenna
16
17
Location of Controls
15 14 13 12 11
10 1 2 3 9 7845 6

2
1. : Mute
2. 0-9 : Input index number on the list / input
characters for WiFi security code
3. : Preset the current playing station to Favorite
4. ▲ : Cursor up
5. ◄ : Cursor left / back to previous menu
6. : Alarm button
7. : Sleep Timer
8. Mode: Switch between Internet
radio/DAB/FM/Bluetooth/Media Centre
9. : Main Menu
10. : Previous station on the list/previous track on
bluetooth / Media Centre
11. Local: Access the local station list
(Local area set up in Configuration)
12. : Press to toggle between Standby and
Operation
13. : Recall the favorite list
14. OK : confirm button
15. ► : Cursor right
16. ▼: Cursor down
17. Vol+ : Volume up
18. Vol- : Volume down
19. EQ : Equalizer
20. : Next station on the list/next track on
bluetooth/Media Centre
21. : Play/pause for Bluetooth/Media Centre
Play/stop for Internet radio
22. Dimmer: Access the Dimmer menu to adjust the
brightness of the display
23. Info: Quick access to Network and System
information
Remote Control

3
Using remote control
On the alpha-numerical keypad, press each button repeatedly to cycle through the
letters, numbers and symbols as listed below.
To input a character, scroll to the correct one and when it is highlighted, press the ►
button to input the next character. When it comes to the last character of the
password and it is highlighted, press [OK] to confirm.
Button 1: 1 and different kind of symbols !@#$%^&*()_+[]{};:'”\|,./<>?
Button 2: 2ABCabc
Button 3: 3DEFdef
Button 4: 4GHIghi
Button 5: 5JKLjkl
Button 6: 6MNOmno
Button 7: 7PQRSpqrs
Button 8: 8TUVtuv
Button 9: 9WXYZwxyz
Button 0: 0
Using control button on the radio unit
Use the [Tune/Select] knob to scroll through the characters, when the correct one
is highlighted, press [ ► ] button to input the next character. When it comes to the
last character of the password and it is highlighted, press [Tune/Select] to confirm.
Note: The security code is case sensitive.
How to input security code for your wireless network

4
Before you start
Please ensure the following is ready:
You have a broadband internet connection.
A wireless broadband router is connected to the internet successfully. The radio
supports Wireless B, G and N connection (Wireless N router can also be used with
the setting on B or G). You know the Wired Equivalent Privacy (WEP) or Wi-Fi
Protected Access (WPA) data encryption code/password. You need to key in the
correct code when the radio is connected to the wireless router for network
connection. If you do not know the code/password, please contact the person
/technician who set up the router/network for you.
The radio can work via Wireless network connection (Wi-Fi connection) and Wired
connection (Ethernet RJ45).
Precautions
The radio should not be used in a high temperature or high humidity environment
over prolonged periods of time as this may damage the unit.
Keep the radio away from liquids as it may get damaged. Please switch off the radio
immediately if water or liquids is spilled into the radio. Consult with the shop you
bought this radio for any question.
Avoid using or storing the unit in dusty or sandy environment.
Do not open and repair the radio by yourself.
Use only the AC adaptor supplied with the radio. Connecting a power supply with a
different rating will cause permanent damage to the radio and may be hazardous.
Clean only with dry cloth.
Before you start / Precautions

5
• Remove internet radio from the package box.
• Plug in the power adapter and switch the Power on/off switch (on the rear cabinet)
to ON. Press [ ] button on the front.
◦ Caution: Use only the adaptor supplied with the radio. Connecting a power
supply with a different rating will cause permanent damage to the radio and may be
hazardous.
1. To start up

6
2. Network Setup
Internet connection can be setup via Wired LAN or Wireless LAN (WiFi).
Your Radio requires a broadband Internet connection through wired Ethernet or
WiFi. The easiest way is use a CAT 5 or CAT 6 cable to connect through wired
Ethernet to a Wifi router, which connects to an Adsl modem or a cable modem
provided by your ISP.
WPS connection is available if your router has a WPS button.
To configure the network via remote app, see Chapter 12 for more details
[under Wi-Fi Network > Add AP (SmartConfig)].
Wired LAN (Ethernet)
For Wired Ethernet connection to a router with DHCP enabled, the network
configuration for Internet connection is automatically done and the Radio can be
used for Internet radio and UPnP sharing without user interaction. When the
network is connected, the Ethernet icon will appear on the top left corner.
Wireless LAN (Wi-Fi)
• If this is first time use, the Configure Network wizard will be displayed. Choose Yes
to start configuring network. Press the [ ◄ ] button to highlight Yes and press
[Tune/Select] to confirm.
• Select Add/Remove AP from the list, use the [Tune/Select] knob to scroll and
press it to confirm, then choose Add AP (Scan):
• It will start scanning the available Wi-Fi routers around. Scroll to your network and
press [OK] to confirm. If your wifi network has a security code protected, it will ask
you to enter the passphrase/password. Please refer to the above section 'How to
input security code for your wireless network' on P.3.
Note: The password is case sensitive. Please consult with the one who setup your
network if you don't know the password.
• When the Wi-Fi connection is successful, the Association Complete will be shown
briefly. The wifi signal bar will appear on the top left corner of the display:
Configure Network?
<Yes> No
Add AP
Remove AP
Add/Remove AP
AP:[ ]
Wi-Fi signal bar

7
Press [ Menu ] to enter the main menu or the on the remote control. Scroll by
rotating the [Tune/Select] knob or the [ ◄ / ► ] button on remote:
My Favorite - To show the list of favorite stations which have been assigned to the
presets. There are up to 99 presets available.
Internet Radio - Start exploring the worldwide radio stations and music here.
Media Centre - You can browse and stream music from your network via UPnP or
DLNA Compatible devices.
DAB+/DAB Radio - Pick up DAB+ and DAB radio signal if available in your local
area (no internet connection required).
FM Radio - Receive ordinary FM radio stations in your local area (no internet
connection required).
Bluetooth - Bluetooth playback, to play audio stream (receive) from another
Bluetooth enabled device after pairing/connected each other.
Alarm - Alarm clock. Two alarm settings available.
Sleep Timer - Enable the timer to turn the radio in standby after the selected time
elapsed.
Configuration - More options/settings available to personalize as you desire.
3. Overview of features and functions